Topic : AirPort Extreme with USB hard drive

Topic Archived This topic has been archived - replies are not allowed.


This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .



            Permlink
            Replies : 1 - Pages : 1 - Last Post : Jul 22, 2008 12:30 AM by: terry78
989Design

Posts: 4
From: Michigan
Registered: Feb 7, 2008
AirPort Extreme with USB hard drive
Posted: Jul 21, 2008 7:13 AM
 

Hi...I have an AirPort Extreme with a Maxtor OneTouch 250MB hard drive attached (via USB port). I have two computers which access the internet and the hard drive through the AirPort.

The first computer is a 1.8 GHz PowerPC G5 (with 3GB of SDRAM). The second is a 2 GHz Intel Core2 Duo IMac (with 4GB of SDRAM).

Both computers have full signal strength via AirPort and both computers have no connection/speed issues with the internet. It's when trying to copy to/from the USB disk that there are problems. The older Mac, the G5, has no problems at all. Great copy speeds in both directions, I can even work off of files on the USB disk without a problem.

The iMac, though, has a problem writing to/from the external hard disk. It connects without a problem, but after that, things come to a standstill.

For example, I can copy a 25MB file from the AirDisk to the G5 in about 15 seconds. If I try to copy the same file to the iMac, it takes as long as 5 minutes. I've tried every setting I can in AirPort Utility, including trying each of the channels individually, and nothing helps. I've disconnected the G5 from the network and that didn't make a difference, either.

Other info...the AirPort firmware is updated to version 7.3.2 and both Macs are updated to System 10.5.4.

If anybody has any advice, I will be eternally grateful.

MacBook 2GHz Intel Core 2 Duo   Mac OS X (10.5.4)    
terry78

Posts: 10
From: California
Registered: Jan 22, 2008
Re: AirPort Extreme with USB hard drive
Posted: Jul 22, 2008 12:30 AM   in response to: 989Design
 

I have a very similar problem. I have a 2.8 GHz iMac with 2GB RAM and am using OS X v10.5.4, and an Airport Extreme (v7.3.2), both updated to latest firmware. I have a 500 GB TrekStor external HD connected to the AEBS via USB. The TrekStor HD was pre-formatted in FAT32 and is visible on my iMac's desktop and in Finder but I cannot transfer files to it or see files on it. When I drag and drop a file on the TrekStor, it sometimes seems to go well but then the file is not visible via Finder, and sometimes I get an "insufficient privileges" message. I repair permissions on the iMac's internal HD without any change. I am logged in as the admin. All assistance is much appreciated!

2.8GHz iMac   Mac OS X (10.5.4)   AEBS