Topic : USB 2.0 PCI card on G4?

Topic Archived This topic has been archived - replies are not allowed.


This question is answered.



            Permlink
            Replies : 6 - Pages : 1 - Last Post : Oct 5, 2008 12:39 PM by: michaelmayor
Jrtechn

Posts: 247
From: Orange County, CA
Registered: Dec 16, 2006
USB 2.0 PCI card on G4?
Posted: Aug 30, 2008 6:19 PM
 

I bought a Creative I/O USB 2.0 port PCI card for my "sawtooth" Power Mac G4 thinking I could use it for faster data transfers from my external USB 2.0 drives. Installation was easy and it shows up in the system profiler except in the PCI list it says it's occupying slot D and then below it that line it says the same thing again. Also my USB 2.0 drives won't work on it and they won't mount. But my Apple keyboard and mouse work fine when plugged into the PCI card. Why is it only some devices work?

2.4 Ghz Intel Core 2 Duo MacBook (Black), 450 Mhz Power Mac G4 "Sawtooth"   Mac OS X (10.5.4)   G4 dual boots OS X 10.4.11 and Mac OS 9.2.2  
japamac


Posts: 8,097
From: Japan
Registered: Apr 16, 2006
Re: USB 2.0 PCI card on G4?
Posted: Aug 30, 2008 7:16 PM   in response to: Jrtechn
 

Hi-

Do you know the chipset of the USB PCI card? I can only find information for Creative I/O that shows use of only ALi or VIA chipsets.

NEC chipsets are preferred.

It could be that the card chipset doesn't have the compatibility to communicate with the external drives (possibly additional drivers needed).
It could also be that the chipset of the external drive housing is not compatible with the controller chipset of the PCI card.
Add to that the possibility that the combination of the two chipsets are not compatible with OS X.

What are the makes of the external drive housings?

G4AGP(450)Sawtooth, 2GHz 7447A, 2GB RAM, Raptor/SE16/Firmtek, Radeon 9800 256MB   Mac OS X (10.5.4)   ATI Silencer, DVR-109, 23"ACD, Ratoc USB2.0, QCam Ultra, NikonCoolscan, 520W PSU  
Jrtechn

Posts: 247
From: Orange County, CA
Registered: Dec 16, 2006
Re: USB 2.0 PCI card on G4?
Posted: Aug 30, 2008 10:00 PM   in response to: japamac
 

I'm not sure about the chipset. The external drives are Maxtor/Seagate.

2.4 Ghz Intel Core 2 Duo MacBook (Black), 450 Mhz Power Mac G4 "Sawtooth"   Mac OS X (10.5.4)   G4 dual boots OS X 10.4.11 and Mac OS 9.2.2  
makjac

Posts: 5
From: UK
Registered: Aug 19, 2008
Re: USB 2.0 PCI card on G4?
Posted: Aug 30, 2008 10:46 PM   in response to: Jrtechn
 

I have recently successfully installed a Belkin into my Sawtooth as it was suggested to be a good combination. However, when I put it into my newly acquired Quicksilver it refused to boot. I can only assume it was a bus speed issue.

Powermac G4 AGP (Sawtooth & Quicksilver)   Mac OS X (10.4.11)    
motsteve


Posts: 473
From: Plantation, FL
Registered: Aug 21, 2008
Re: USB 2.0 PCI card on G4?
Posted: Aug 31, 2008 6:59 AM   in response to: makjac
 

I've been told by several different people and by some exploration that Tiger was never meant to boot USB because the original system was all USB1.1. Right now, I just take their word for it because I have nothing to refute it. In the software world moving USB and Firewire drives from one boot scheme to another is far from trivial. As far as mounting and using the drives for storage, etc I understand that this is not so bad.

Take this with a grain of salt. I design radios and integrated circuits not software. Now if you need help with a SPICE simulation..............;-)

iMac 20" and G4 Digital Audio   Mac OS X (10.5.4)   G4 is MacOSX(10.4.11) iMac 3G ram G4 1G ram  
Texas Mac Man


Posts: 7,619
From: Richardson, TX
Registered: Aug 7, 2002
Re: USB 2.0 PCI card on G4?
Posted: Aug 31, 2008 7:59 AM   in response to: Jrtechn
Solved

Best bet is any card with a NEC PD720100 or PD720101 chipset. Stick with the NEC chip, and try NOT to use drivers, Tiger doesn't need the drivers.

All of these Cards are NEC chipset based
Adaptec 3100LP
BAFO BF-460
Belkin F5U220
GWC UC-160
IOGear GIC250U & GIC251U
Keyspan U2PCI-5
O'toLink U2-C2A, U2-C2B, U2-P20N & U2-P50
Ratoc PCIU5
USBWholesale UII-PCIP

I have an IOGear GIC251U USB PCI card in my G4 AGP.

 Cheers, Tom ;)



 G4 AGP 400, G3 400 FW Pismo, OS X (10.4 + 10.3)     OS 9.2.2, DSL, Zip, Canon LiDE30 Scanner, CD-RW, Canon i960 Printer, Belkin UPS
michaelmayor

Posts: 6
From: California
Registered: Nov 22, 2007
Re: USB 2.0 PCI card on G4?
Posted: Oct 5, 2008 12:39 PM   in response to: Texas Mac Man
 

I have the Belkin Card with the nec chipset but have sleep problems, any help?

iMAC G4   Mac OS X (10.4.11)   networked to mac mini and 2 PCs