• Power Macintosh G3 with Dual Hi-Res Monitors

    Hopefully, this info will help someone wanting to run large dual flat-screen monitors (4:3) on  Power Macintosh G3 Beige Minitower. My results stemmed from a previous post that I started, which was “DVI PCI...view more
    Glen Doggett
    last modified by Glen Doggett
  • Dual DVI Monitor Setup PowerMac G5

    Hi everyone! I am the new owner of a PowerMac G5. I have two identical monitors. I have DVI, VGA, Composite, and S-Video. The problem I'm having now is that I need a way to get a dual monitor setup to work with the co...view more
    BDAqua
    last modified by BDAqua
  • usb ports stopped working

    I have a Power MacG4 MDD in fairly good condition. It was working fine about 2 hours ago. Then, the mouse and keyboard stopped working. I've narrowed the problem down to the USB ports in the back of the monitor. If I ...view more
    BDAqua
    last modified by BDAqua
  • Flatline power Macs with AV in?

    I'm thinking of a Mac Museum with a trimmed down SE/30 hooked up to a power Mac's AV in. Which Power Macs have an AV in Port that are also flatline? Thank you.view more
    ThatTalkingEnderman
    last modified by ThatTalkingEnderman
  • G5 video to dual images

    I recently acquired a PowerMac G5 and would like to put it into service at my church.  I purchased a DVI splitter to get the image to the monitor and a VGA connector going to projectors.  Everything appears ...view more
    BDAqua
    last modified by BDAqua
  • ATI Radeon 9600XT

    I'm not having a problem, I'm just looking for information.   I have an ATI Radeon 9600XT 128 MB in my G5 1.8 DP Mac.  It has one ADC port and one DVI port.  However, everything I have read says this c...view more
    BDAqua
    last modified by BDAqua
  • DVI PCI Card/s for G3 Minitower

    I am a new member of this forum, and hope that someone has the answersI need. I have a Power Macintosh G3 Beige Minitower @ 333 MHz, and I am running OS 8.5.1. There is a reason I have to stay with OS 8.5.1.   I ...view more
    RedBullX90
    last modified by RedBullX90
  • G3/4 Shows "Input not supported" after res change, how to change back?

    I have an old G3 or 4 running 9.2.1, I just use it for one program, I boot it up about once a month, when it came up last time the resolution was all off, I went in to the monitor settings and changed it back to what ...view more
    BDAqua
    last modified by BDAqua
  • PowerMac G4 bios lock?

    I Purchased a PowerMac G4 Quicksilver off of my buddy, I quickly decided to tear it down and clean every square inch, whilst I was doing so I knocked off a resistor from the logicboard, so I bought a new motherboard. ...view more
    Pheidius1
    last modified by Pheidius1
  • grey screen on startup on ppc g4 quicksilver

    good day all,   i had ppc g4 quicksilver 933 , and it just sit on my room, never use. last week i turn it on, and everything went well, but last night, when i turn it on, it gave me grey screen without apple lo...view more
    BDAqua
    last modified by BDAqua
  • Where Can I Get A Quicksilver Power Mac Monitor Connector?

    I retired my Power Mac G4 (Quicksilver?) in 2010 in favor or a 27" IMac.  Now after sitting in storage for years, I'd like to connect it to my IMac like an external HD to wipe it clean and move it out.  I di...view more
    Allan Jones
    last modified by Allan Jones
  • Can I add two monitors to a Power Macintosh G3?

    I have a faithful and well loved 1997 Power Macintosh G3 minitower, running Mac OS 9.2.2, and I was thinking about adding a 16 inch Macintosh Color Display (CRT) to the slightly older 14 inch Macintosh Color Display (...view more
    Glen Doggett
    last modified by Glen Doggett
  • Does anyone still game regularly on a PPC Mac?

    Looking for players who game regularly on Power PC Macsview more
    BDAqua
    last modified by BDAqua
  • I need to get a video card where I can see the post start up information.

    I have an older power mac 1.1 version running under mac OS 10.10.  I need a video card where I can see the post computer information as it boots up.view more
    Allan Jones
    last modified by Allan Jones
  • Power Mac G5 Blank screen and no chime on start up

    I have a Power Mac G5 (June 2004). Recently when turning on the plug switch (at the wall) there was a power surge to the Mac which blew the internal power supply. I bought a reconditioned PSU and replaced the blown on...view more
    BDAqua
    last modified by BDAqua
  • Dual monitors both lose video signal?

    Im running dual monitors on my mac editor & within 1-10 minutes of booting up the system, the monitors will lose the video signal. I tried waking up the monitors, but no luck & Changed the DVI connectors. The ...view more
    TheMacMaster20
    last modified by TheMacMaster20
  • Unable to connect Power Mac g5 and a 23"cinema display using DVI to ADC adapter

    Hi guys, I am unable to connect Power Mac g5 and a 23"cinema display using DVI to ADC adapter. The Screen wouldn't light up. the screen "on" button would light up when pressed, then dims out. Could you suggest any tip...view more
    BDAqua
    last modified by BDAqua
  • PowerMac G4 MDD video signal

    Hi! I have a PM G4 MDD with the original video card AGP. But no video signal. The computer booting well with no bootBeep alert. I can  hear the Mac "logo sound" and the notifications after few minutes. I can up ...view more
    Allan Jones
    last modified by Allan Jones
  • g4 AGP graphics video card problems, dvi connection

    HI, I have a G4 I am still eeking out a lot of use from.  I tried to hook up a dvi-d single link cable to it via the standard card in it, with both vga and dvi connector.  When it boots, it looks like it is ...view more
    BDAqua
    last modified by BDAqua
  • Power mac g4 not working with 22" Apple Cinema Display:(

    Hey all, My System specs:   Machine ID:   406 Model Name: Power Mac G4 (AGP graphics) Processor info: PowerPC G4 Machine Speed: 500MHz OS 9.2 Graphics Card: ATI Radeon 7500 32MB DDR VGA/ADC AGP V...view more
    BDAqua
    last modified by BDAqua
Previous12Next