G4 MDD 1.00 and MACOS XHi! after many attempts I came to conclusion that I need to reinstall the MACOSX. I haven't the original disks and not being sure of this solution I would rather buy on Ebay or downloading the MINIMUM MACOSX to tr...view more
MAC G4 - booting from different OSHi I need some help. I am completely new to MAC. I have two Power MAC G4, one assembled in Ireland = Y and one from Singapore = Z but inside , the components are differents. I have two Hard Drive,HDD-A = OS X 10...view more
10.5.6 why it do not have the app off it?when i check my gmail it say i need a new brown for Safari my macbook was 10.5.8.but i dont know how or what to do to get a brown for this happened,need some one to help step by step.why i am not allowed to create or ...view more
Thread Hi! I have a Mac G4. Apple tech said I needed a new vintage apple mouse. Have one, yet arrow is still stuck in upper left corner of screen. Any ideas please?
Hi! I have a Mac G4. Apple tech said I needed a new vintage apple mouse. Have one, yet arrow is still stuck in upper left corner of screen. Any ideas please?
PowerMac G4 bios lock?I Purchased a PowerMac G4 Quicksilver off of my buddy, I quickly decided to tear it down and clean every square inch, whilst I was doing so I knocked off a resistor from the logicboard, so I bought a new motherboard. ...view more
Solid foundationI bought a Power Mac G4 800MHz in 2002. At that time there were no music software available for OSX . Therefore I bought one that required OS9. Apple at the time allowed the G4 to work with both OS9 and OSX. M...view more
Thread Cannot get past Apple logo for a fresh install Leopard
Cannot get past Apple logo for a fresh install LeopardHi all, After turning the storage room upside down I found an old G5 Quad late 2005 lying free, decided to make a fresh install and assign it to the interns. There were no disks and ram on the motherboard so I...view more
Artic silver applicationArctic Silver has very precise instructions on how to apply it to a long and wide history of AMD and Intel CPU/s it, however, completely ignores Power PC chips. Does anyone know of a link or have an older instruction ...view more
Power Mac G5 Quad LCS RepairHi again. Whilst servicing my LCS I had the misfortune to break the outlet pipe fom processor A's heat transfer block. (For anyone attempting to remove the factory fit tubes DO NOT try pulling them off-cut them above ...view more
Red LED on Logic Board.Hello Guys, I bought a broken Power Mac G5 (first for casemodding) but now I want to repair it I don't want that the powermac will die. On the Logic Board this Red Led is shining red: http://i.imgur.com/LObp...view more
Which CPU is CPU A and which CPU BHi all, Quick question. Does anyone know which processor board is CPU A and CPU B? Is Cpu A the board on the bottom side or the board on the top side? As noted in a recent post of mine, I successfully pulled b...view more
Powering Down?My PowerMac G4 is powering down before it gets to the desktop. Can anyone tell me how to fix it or tell me what is wrong or both?view more
Old Mac. Need helpHi, I am new to the Mac world. I found a very old mac the Power Mac G4 the original owner took out the hard drive because of privacy. I got the correct hard drive for the mac and I am very confused because Apple won't...view more
Can't access Recovery Mode on old MacI've had an old Mac lying around unused for the last few years. It is currently running (from "About this Mac") OS X version 10.5.8 Dual 1.3 GHz PowerPC G4 2 MB L3 cache per processor 768 MB...view more
Power Supply for Powermac MDDHey all, I've had a dead Powermac MDD sitting in my room for a couple years now that I picked up for free because it wouldn't turn on. I came to the conclusion it was the PSU, so I took it out and tossed it ye...view more
PPC live streaming softwareDoes anyone know of a live stream i can use for my powermc g5 running leopard, if you can that would be SO HELPFULL!!! thanks!!view more
Quad 2.5 thermal paste reapplication.HI all, I have to admit that I went out and bought a refurb MacPro and tricked it out before I dared to attempt this with my BFF quad 2.5 PowerMac. I got a: long handled T 4 mm ball hex, Long h...view more