smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Apple SD/SM/TS...E/F SSDs Device Model: APPLE SSD SD256E Serial Number: 131769405180 LU WWN Device Id: 5 001b44 9b9a68afc Firmware Version: 1027AP User Capacity: 251,000,193,024 bytes [251 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 1.8 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 26 20:52:57 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 000 - 0 5 Reallocated_Sector_Ct POSR-- 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 9752 12 Power_Cycle_Count -O--CK 100 100 000 - 21721 169 Unknown_Attribute -O--CK 100 100 010 - 1327493025216 173 Wear_Leveling_Count -O--CK 181 181 100 - 39190990 192 Power-Off_Retract_Count -O--CK 100 100 000 - 373 194 Temperature_Celsius -O---K 062 062 000 - 38 (0 154 0 8 0) 197 Current_Pending_Sector -O--CK 000 000 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 240 Unknown_SSD_Attribute ------ 000 000 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 11 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 11 [2] occurred at disk power-on lifetime: 6171 hours (257 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 51 -- 40 02 00 00 00 00 d0 3c 00 40 00 512 sectors at LBA = 0x00d03c00 = 13646848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 00 d0 3c 00 40 00 00:00:00.000 READ DMA EXT 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] Error 10 [1] occurred at disk power-on lifetime: 6171 hours (257 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 51 -- 40 02 00 00 00 00 d0 3c 00 40 00 512 sectors at LBA = 0x00d03c00 = 13646848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 00 d0 3c 00 40 00 00:00:00.000 READ DMA EXT 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] Error 9 [0] occurred at disk power-on lifetime: 6171 hours (257 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 51 -- 40 02 00 00 00 00 d0 3c 00 40 00 512 sectors at LBA = 0x00d03c00 = 13646848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 00 d0 3c 00 40 00 00:00:00.000 READ DMA EXT 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] Error 8 [3] occurred at disk power-on lifetime: 6171 hours (257 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 51 -- 40 02 00 00 00 00 d0 3c 00 40 00 512 sectors at LBA = 0x00d03c00 = 13646848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 00 d0 3c 00 40 00 00:00:00.000 READ DMA EXT 25 00 00 02 00 00 00 05 2a 9b 18 40 00 00:00:00.000 READ DMA EXT 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET