default	08:43:12.473963+0900	bluetoothaudiod	VID:0xFFFF PID:0x0000 (0x0000FFFF) FW:0x0000 (0x00000000FFFF)
default	08:43:12.474626+0900	bluetoothaudiod	Device supports A2DP sink
default	08:43:12.474745+0900	bluetoothaudiod	[init] entry
default	08:43:12.474786+0900	bluetoothaudiod	[init] virtual address = 0x7fa249f2b000
default	08:43:12.475569+0900	bluetoothaudiod	Create endpoints connected devices:1
default	08:43:12.476305+0900	bluetoothaudiod	Wifi is on 2.4GHz? 0
default	08:43:12.476396+0900	bluetoothaudiod	AAC Enabled
default	08:43:12.476524+0900	bluetoothaudiod	[init] entry
default	08:43:12.476567+0900	bluetoothaudiod	[init] virtual address = 0x7fa249f44000
default	08:43:12.476850+0900	bluetoothaudiod	[init] entry
default	08:43:12.476869+0900	bluetoothaudiod	[init] virtual address = 0x7fa249f75000
default	08:43:12.477833+0900	bluetoothaudiod	[createEndpoints] No SBC / AAC Rate Limits
default	08:43:12.478014+0900	bluetoothaudiod	[init] entry
default	08:43:12.478038+0900	bluetoothaudiod	[init] virtual address = 0x7fa249fa6000
default	08:43:12.478324+0900	bluetoothaudiod	Device supports AVRCP target
default	08:43:12.478856+0900	bluetoothaudiod	MediaRemote server initializing...
default	08:43:12.478940+0900	bluetoothaudiod	1 clients have now registered for Now Playing Notifications
default	08:43:12.479266+0900	bluetoothaudiod	Device supports HFP
default	08:43:12.479383+0900	bluetoothaudiod	Set current codec (null)->SCO
default	08:43:12.479907+0900	bluetoothaudiod	Created audio device Mi True Wireless Earphones 2
default	08:43:12.479975+0900	bluetoothaudiod	XPC: BTConfigure for Mi True Wireless Earphones 2
default	08:43:12.480038+0900	bluetoothaudiod	Enqueue - BTConfigure for Mi True Wireless Earphones 2
default	08:43:12.480072+0900	bluetoothaudiod	Current command: BTConfigure
default	08:43:12.480093+0900	bluetoothaudiod	Starting XPC timer for 15.000000 seconds
default	08:43:12.480149+0900	bluetoothaudiod	ProcessXPC: configure (active:0)
default	08:43:12.480245+0900	bluetoothaudiod	Outgoing connection: Set A2DP, HFP to pending Connected
default	08:43:12.480477+0900	bluetoothaudiod	A2DP pending None->Connected currentState:Disconnected stateChanging:0 active:0
default	08:43:12.480515+0900	bluetoothaudiod	A2DP Connect initiator:1 pairedSEP streamState:0 state:Disconnected pendingState:Connected
default	08:43:12.480576+0900	bluetoothaudiod	Interface state:1 interfaceConnected:0
default	08:43:12.480694+0900	bluetoothaudiod	Not yet connected to the device
default	08:43:12.481585+0900	bluetoothaudiod	Setting cached activePlayerPath (null) -> origin-hacktheplanet-1280262988/client-com.google.Chrome-32952 (Google Chrome)/player-MediaRemote-DefaultPlayer
default	08:43:12.481982+0900	bluetoothaudiod	requiresAuthenticationEncryption - psm 0x0019 - Authentication disabled? 0
default	08:43:12.482408+0900	bluetoothaudiod	Request: playbackState<15FF803E-A62B-4E88-B241-AD2C5259D8A0> for origin-hacktheplanet-1280262988/client-com.google.Chrome-32952 (Google Chrome)/player-MediaRemote-DefaultPlayer
default	08:43:12.483264+0900	bluetoothaudiod	Response: playbackState<15FF803E-A62B-4E88-B241-AD2C5259D8A0> returned <Paused> for origin-hacktheplanet-1280262988/client-com.google.Chrome-32952 (Google Chrome)/player-MediaRemote-DefaultPlayer in 0.0039 seconds
default	08:43:12.483323+0900	bluetoothaudiod	Media Remote Playback State Paused
default	08:43:12.483892+0900	bluetoothaudiod	HFP pending None->Connected currentState:Disconnected stateChanging:0 active:0
default	08:43:12.483932+0900	bluetoothaudiod	HFP Connect
default	08:43:12.484077+0900	bluetoothaudiod	initWithDevice:Mi True Wireless Earphones 2 delegate:HFP
default	08:43:12.484195+0900	bluetoothaudiod	addAudioListeners
default	08:43:12.485301+0900	bluetoothaudiod	(IOBluetoothDeviceConfigUserLib - 0x7fa249c51070) establishing new XPC Connection for process bluetoothaudiod
default	08:43:12.485641+0900	bluetoothaudiod	IOBluetoothGetLocalServices
default	08:43:12.487651+0900	bluetoothaudiod	 HALPlugInManagement::RegisterPlugIns: skipping in-process plug-ins
error	08:43:12.487786+0900	bluetoothaudiod	AddInstanceForFactory: No factory registered for id <CFUUID 0x7fa24b0070a0> F8BB1C28-BAE8-11D6-9C31-00039315CD46
default	08:43:12.491534+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.492232+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.492679+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.493199+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.493691+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.494283+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.494868+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.495269+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.495733+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.496315+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.496798+0900	bluetoothaudiod	Exception NSInvalidUnarchiveOperationException thrown while decoding IOBluetoothLocalSDPServiceRecord
default	08:43:12.497384+0900	bluetoothaudiod	Connect: handsFreeState:0
default	08:43:12.498016+0900	bluetoothaudiod	OpenRFCOMMChannel:Mi True Wireless Earphones 2 connected:1 rfcommChannel:0x0 connected:0
default	08:43:12.499098+0900	bluetoothaudiod	requiresAuthenticationEncryption - psm 0x0003 - Authentication disabled? 0
default	08:43:12.499691+0900	bluetoothaudiod	instantiateOnDevice for regular
default	08:43:12.499792+0900	bluetoothaudiod	setRfcommChannel delegate
error	08:43:12.507735+0900	bluetoothaudiod	 HALC_ShellDriverPlugIn::Open: Can't get a pointer to the Open routine
error	08:43:12.508524+0900	bluetoothaudiod	 HALC_ShellDriverPlugIn::Open: Can't get a pointer to the Open routine
error	08:43:12.510160+0900	bluetoothaudiod	 AudioObjectAddPropertyListener: no object with given ID 0
error	08:43:12.510760+0900	bluetoothaudiod	 AudioObjectAddPropertyListener: no object with given ID 0
error	08:43:12.511251+0900	bluetoothaudiod	 AudioObjectAddPropertyListener: no object with given ID 0
error	08:43:12.511768+0900	bluetoothaudiod	 AudioObjectAddPropertyListener: no object with given ID 0
error	08:43:12.512197+0900	bluetoothaudiod	 AudioObjectHasProperty: no object with given ID 0
error	08:43:12.512697+0900	bluetoothaudiod	 AudioObjectHasProperty: no object with given ID 0
default	08:43:12.620944+0900	bluetoothaudiod	[connectionComplete] 0 (initiator:1)
default	08:43:12.621392+0900	bluetoothaudiod	Sending Discover (intiator:1)
default	08:43:12.623322+0900	bluetoothaudiod	RFCOMM channel 2 (incoming:0) for Mi True Wireless Earphones 2
default	08:43:12.653836+0900	bluetoothaudiod	[AVDTP Response] -> Discover
default	08:43:12.653951+0900	bluetoothaudiod	[init] entry
default	08:43:12.653979+0900	bluetoothaudiod	[init] virtual address = 0x7fa24b515000
default	08:43:12.654124+0900	bluetoothaudiod	[discoverEndpointsComplete]: 0 (initiator:1)
default	08:43:12.654140+0900	bluetoothaudiod	Discover Endpoint Capabilities (initiator:1)
default	08:43:12.723911+0900	bluetoothaudiod	rfcommChannelOpenComplete 0
default	08:43:12.724020+0900	bluetoothaudiod	State change 0->1
default	08:43:12.726464+0900	bluetoothaudiod	[AVDTP Response] -> Get Capabilities
default	08:43:12.727005+0900	bluetoothaudiod	[getCapabilities Response]: 0 (initiator:1)
default	08:43:12.727474+0900	bluetoothaudiod	Sending Set Configuration (initiator:1)
default	08:43:12.727535+0900	bluetoothaudiod	[autoConfig] entry
default	08:43:12.727566+0900	bluetoothaudiod	[autoConfig SBC]
default	08:43:12.737729+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa24b106fc0) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.737772+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa24b106fc0) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.737840+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa24b106fc0) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 2, mCodecDelay = 73
default	08:43:12.737960+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24b812640) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.738008+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24b812640) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.738369+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa24b111b90) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.738421+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa24b111b90) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.738486+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa24b111b90) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 48, mCodecDelay = 73
default	08:43:12.738640+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24b816a40) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.738704+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24b816a40) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.739151+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa24b109aa0) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.739219+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa24b109aa0) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.739301+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa24b109aa0) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 48, mCodecDelay = 73
default	08:43:12.739418+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24b81ac40) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.739456+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24b81ac40) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.739537+0900	bluetoothaudiod	[autoConfig] frequency: 1
default	08:43:12.739573+0900	bluetoothaudiod	[autoConfig] channel mode: 1
default	08:43:12.739590+0900	bluetoothaudiod	[autoConfig] blocks: 1
default	08:43:12.739609+0900	bluetoothaudiod	[autoConfig] allocation: 1
default	08:43:12.739628+0900	bluetoothaudiod	[autoConfig] subbands: 1
default	08:43:12.740036+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa24b10a2e0) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.740099+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa24b10a2e0) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.740200+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa24b10a2e0) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 39, mCodecDelay = 73
default	08:43:12.740351+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24d80ac40) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.740420+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24d80ac40) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.740535+0900	bluetoothaudiod	[autoConfig] max bitpool: 39
default	08:43:12.741025+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa249c54320) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.741092+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa249c54320) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.741168+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa249c54320) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 2, mCodecDelay = 73
default	08:43:12.741261+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24a02ce40) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.741306+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24a02ce40) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.741405+0900	bluetoothaudiod	[autoConfig] min bitpool: 2
default	08:43:12.741791+0900	bluetoothaudiod	ACSBCEncoder.cpp:211:Initialize: (0x7fa249c1d1d0) Input format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.741859+0900	bluetoothaudiod	ACSBCEncoder.cpp:214:Initialize: (0x7fa249c1d1d0) Output format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame
default	08:43:12.741952+0900	bluetoothaudiod	ACSBCEncoder.cpp:464:Initialize: (0x7fa249c1d1d0) @@@@ 'sbc ' encoder configuration: fsHz = 48000, chanMode = 3, allocMethod = 0, numBlocks = 16, numSubbands = 8, mEncodeQuality = 0, mBitRateBps = 0, bitpool = 39, mCodecDelay = 73
default	08:43:12.742125+0900	bluetoothaudiod	ACSBCDecoder.cpp:205:Initialize: (0x7fa24b81ce40) Input format:  2 ch,  48000 Hz, 'sbc ' (0x00000000) 0 bits/channel, 0 bytes/packet, 128 frames/packet, 0 bytes/frame
default	08:43:12.742193+0900	bluetoothaudiod	ACSBCDecoder.cpp:208:Initialize: (0x7fa24b81ce40) Output format:  2 ch,  48000 Hz, Float32, inter
default	08:43:12.742307+0900	bluetoothaudiod	[autoConfig] start bitpool: 39
default	08:43:12.743383+0900	bluetoothaudiod	[autoConfig] exit: 0x0
default	08:43:12.743792+0900	bluetoothaudiod	processATCommand: AT+BRSF=543 state:1
default	08:43:12.743849+0900	bluetoothaudiod	sendingATCommand: +BRSF: 750
default	08:43:12.744046+0900	bluetoothaudiod	AudioComponentPluginMgr.mm:939   local component registrations changed
default	08:43:12.744101+0900	bluetoothaudiod	AudioComponentPluginMgr.mm:939   local component registrations changed
default	08:43:12.751198+0900	bluetoothaudiod	[AVDTP Response] -> Set Configuration
default	08:43:12.751422+0900	bluetoothaudiod	Set current codec (null)->SBC
default	08:43:12.751647+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x0
default	08:43:12.753041+0900	bluetoothaudiod	Sending Open (initiator:1)
default	08:43:12.760056+0900	bluetoothaudiod	processATCommand: AT+CIND=? state:1
default	08:43:12.760236+0900	bluetoothaudiod	sendingATCommand: +CIND: ("service",(0,1)),("call",(0,1)),("callsetup",(0,3)),("callheld",(0,2)),("signal",(0,5)),("roam",(0,1)),("battchg",(0,5))
default	08:43:12.773924+0900	bluetoothaudiod	[AVDTP Response] -> Open
default	08:43:12.774579+0900	bluetoothaudiod	requiresAuthenticationEncryption - psm 0x0019 - Authentication disabled? 0
default	08:43:12.783880+0900	bluetoothaudiod	processATCommand: AT+CIND? state:1
default	08:43:12.784049+0900	bluetoothaudiod	sendingATCommand: +CIND: 1,0,0,0,5,0,5
default	08:43:12.815289+0900	bluetoothaudiod	[Open Complete] 0x0
default	08:43:12.815316+0900	bluetoothaudiod	AVRCP pending None->Connected currentState:Disconnected stateChanging:0 active:0
default	08:43:12.815332+0900	bluetoothaudiod	AVRCP Connect
default	08:43:12.815716+0900	bluetoothaudiod	requiresAuthenticationEncryption - psm 0x0017 - Authentication disabled? 0
default	08:43:12.816889+0900	bluetoothaudiod	A2DP state change Disconnected->Connected (Device active:0)
default	08:43:12.817131+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x0
default	08:43:12.819503+0900	bluetoothaudiod	A2DP:Connected currentCommand:BTConfigure
default	08:43:12.819540+0900	bluetoothaudiod	BTConfigure complete. New command (null)
default	08:43:12.819581+0900	bluetoothaudiod	A2DP pending Connected->Connected currentState:Connected stateChanging:0 active:0
default	08:43:12.819601+0900	bluetoothaudiod	A2DP:Connected currentCommand:(null)
default	08:43:12.819624+0900	bluetoothaudiod	[updateAudioState] sampleRate:0.000000 isSystemSleeping:0 currentProtocol:(null) state:(null) inputActive:0 outputActive:0
default	08:43:12.819681+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.819708+0900	bluetoothaudiod	Set current protocol (null)->(null)
default	08:43:12.819726+0900	bluetoothaudiod	Input preferred:HFP state:Disconnected pending:Connected changing?:1  Output preferred:A2DP state:Connected pending:None changing?:0
default	08:43:12.820019+0900	bluetoothaudiod	Update activity signaled:0
default	08:43:12.820198+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.820311+0900	bluetoothaudiod	sendAudioStatus isAudioActive:0
default	08:43:12.823673+0900	bluetoothaudiod	processATCommand: AT+CMER=3,0,0,1 state:1
default	08:43:12.823744+0900	bluetoothaudiod	processEventReporting: 3,0,0,1
default	08:43:12.823838+0900	bluetoothaudiod	Mode:3 keyPad:0 display:0 indicatorReporting:1
default	08:43:12.823880+0900	bluetoothaudiod	sendingATCommand: OK
default	08:43:12.824059+0900	bluetoothaudiod	HandsFree Device does not support Codec Negotiation
default	08:43:12.824094+0900	bluetoothaudiod	State change 1->2
default	08:43:12.824132+0900	bluetoothaudiod	handsFree:connected: 0
default	08:43:12.824336+0900	bluetoothaudiod	HFP state change Disconnected->Connected (Device active:0)
default	08:43:12.824503+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x0
default	08:43:12.826251+0900	bluetoothaudiod	Trigger coreaudio to connect to bluetoothaudiod
default	08:43:12.826396+0900	bluetoothaudiod	HFP:Connected currentCommand:(null)
default	08:43:12.826437+0900	bluetoothaudiod	HFP pending Connected->Connected currentState:Connected stateChanging:0 active:0
default	08:43:12.826457+0900	bluetoothaudiod	HFP:Connected currentCommand:(null)
default	08:43:12.826481+0900	bluetoothaudiod	[updateAudioState] sampleRate:0.000000 isSystemSleeping:0 currentProtocol:(null) state:(null) inputActive:0 outputActive:0
default	08:43:12.826602+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.826653+0900	bluetoothaudiod	Set current protocol (null)->(null)
default	08:43:12.826679+0900	bluetoothaudiod	Input preferred:HFP state:Connected pending:None changing?:0  Output preferred:A2DP state:Connected pending:None changing?:0
default	08:43:12.826977+0900	bluetoothaudiod	Update activity signaled:0
default	08:43:12.827122+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.827142+0900	bluetoothaudiod	sendAudioStatus isAudioActive:0
default	08:43:12.827474+0900	bluetoothaudiod	XPC: BTCoreAudioConnect for (null)
default	08:43:12.827651+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x7fa249d0b6e0
default	08:43:12.829565+0900	bluetoothaudiod	Create audio device in the HAL plugin
default	08:43:12.830194+0900	bluetoothaudiod	Sending {
    BTCodecLatency = 0;
    BTDeviceAddress = "41-42-33-f3-2b-1a";
    BTDeviceCategory = 1;
    BTDeviceDoAPUUID = "9FA22AEF-FF5C-4A4B-B463-BC710BD1B462";
    BTDeviceHFPCodecID = 1;
    BTDeviceInEarDetection = 0;
    BTDeviceInEarEnabled = 1;
    BTDeviceInEarPrimaryBudSide = 0;
    BTDeviceInEarStatusPrimary = 1;
    BTDeviceInEarStatusSecondary = 1;
    BTDeviceLEAMaxPacketSize = 0;
    BTDeviceLatency = "0.1";
    BTDeviceManufacturer = ffff;
    BTDeviceModelUID = "ffff 0";
    BTDeviceName = "Mi True Wireless Earphones 2";
    BTDeviceRightChannel = 0;
    BTDeviceSupportsA2DP = 1;
    BTDeviceSupportsAbsoluteVolume = 0;
    BTDeviceSupportsDoAP = 0;
    BTDeviceSupportsInput = 1;
    BTDeviceSupportsOutput = 1;
    BTDeviceSupportsSCO = 1;
    BTDeviceSupportsStereo = 0;
    BTDeviceTurnOffDSP = 0;
    BTDeviceisAppleAccessoryServer = 0;
    BTMethod = BTDeviceConnected;
} to core audio
default	08:43:12.830261+0900	bluetoothaudiod	Update activity signaled:0
default	08:43:12.830456+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.830487+0900	bluetoothaudiod	sendAudioStatus isAudioActive:0
default	08:43:12.867413+0900	bluetoothaudiod	L2CAP open complete 0
default	08:43:12.867474+0900	bluetoothaudiod	AVRCP state change Disconnected->Connected (Device active:0)
default	08:43:12.867767+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x7fa249d0b6e0
default	08:43:12.869250+0900	bluetoothaudiod	Create audio device in the HAL plugin
default	08:43:12.870213+0900	bluetoothaudiod	Sending {
    BTCodecLatency = 0;
    BTDeviceAddress = "41-42-33-f3-2b-1a";
    BTDeviceCategory = 1;
    BTDeviceDoAPUUID = "9FA22AEF-FF5C-4A4B-B463-BC710BD1B462";
    BTDeviceHFPCodecID = 1;
    BTDeviceInEarDetection = 0;
    BTDeviceInEarEnabled = 1;
    BTDeviceInEarPrimaryBudSide = 0;
    BTDeviceInEarStatusPrimary = 1;
    BTDeviceInEarStatusSecondary = 1;
    BTDeviceLEAMaxPacketSize = 0;
    BTDeviceLatency = "0.1";
    BTDeviceManufacturer = ffff;
    BTDeviceModelUID = "ffff 0";
    BTDeviceName = "Mi True Wireless Earphones 2";
    BTDeviceRightChannel = 0;
    BTDeviceSupportsA2DP = 1;
    BTDeviceSupportsAbsoluteVolume = 0;
    BTDeviceSupportsDoAP = 0;
    BTDeviceSupportsInput = 1;
    BTDeviceSupportsOutput = 1;
    BTDeviceSupportsSCO = 1;
    BTDeviceSupportsStereo = 0;
    BTDeviceTurnOffDSP = 0;
    BTDeviceisAppleAccessoryServer = 0;
    BTMethod = BTDeviceConnected;
} to core audio
default	08:43:12.870342+0900	bluetoothaudiod	AVRCP pending Connected->Connected currentState:Connected stateChanging:0 active:0
default	08:43:12.870383+0900	bluetoothaudiod	[updateAudioState] sampleRate:0.000000 isSystemSleeping:0 currentProtocol:(null) state:(null) inputActive:0 outputActive:0
default	08:43:12.870482+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.870522+0900	bluetoothaudiod	Set current protocol (null)->(null)
default	08:43:12.870556+0900	bluetoothaudiod	Input preferred:HFP state:Connected pending:None changing?:0  Output preferred:A2DP state:Connected pending:None changing?:0
default	08:43:12.871361+0900	bluetoothaudiod	Update activity signaled:0
default	08:43:12.872478+0900	bluetoothaudiod	Mi True Wireless Earphones 2 has protocol A2DP in state Connected (pending:None)
default	08:43:12.872598+0900	bluetoothaudiod	sendAudioStatus isAudioActive:0
default	08:43:12.872901+0900	bluetoothaudiod	AVRCP Target version 106 CT Version 106
default	08:43:12.873439+0900	bluetoothaudiod	AVRCP Command: Get Capabilities
default	08:43:12.883913+0900	bluetoothaudiod	sendingATCommand: OK
default	08:43:12.891700+0900	bluetoothaudiod	CreateAudioDevice isLowEnergy:0 coreAudioPlugin:0x7fa249d0b6e0
default	08:43:12.894182+0900	bluetoothaudiod	Create audio device in the HAL plugin
default	08:43:12.895845+0900	bluetoothaudiod	Sending {
    BTCodecLatency = 0;
    BTDeviceAddress = "41-42-33-f3-2b-1a";
    BTDeviceCategory = 1;
    BTDeviceDoAPUUID = "9FA22AEF-FF5C-4A4B-B463-BC710BD1B462";
    BTDeviceHFPCodecID = 1;
    BTDeviceInEarDetection = 0;
    BTDeviceInEarEnabled = 1;
    BTDeviceInEarPrimaryBudSide = 0;
    BTDeviceInEarStatusPrimary = 1;
    BTDeviceInEarStatusSecondary = 1;
    BTDeviceLEAMaxPacketSize = 0;
    BTDeviceLatency = "0.1";
    BTDeviceManufacturer = ffff;
    BTDeviceModelUID = "ffff 0";
    BTDeviceName = "Mi True Wireless Earphones 2";
    BTDeviceRightChannel = 0;
    BTDeviceSupportsA2DP = 1;
    BTDeviceSupportsAbsoluteVolume = 1;
    BTDeviceSupportsDoAP = 0;
    BTDeviceSupportsInput = 1;
    BTDeviceSupportsOutput = 1;
    BTDeviceSupportsSCO = 1;
    BTDeviceSupportsStereo = 0;
    BTDeviceTurnOffDSP = 0;
    BTDeviceisAppleAccessoryServer = 0;
    BTMethod = BTDeviceConnected;
} to core audio
default	08:43:12.896280+0900	bluetoothaudiod	AVRCP Command: Register Notification
default	08:43:12.911179+0900	bluetoothaudiod	AVRCP Command: Register Notification
default	08:43:12.951215+0900	bluetoothaudiod	processATCommand: AT+XAPL=000D-0001-0101,2 state:2
default	08:43:12.951246+0900	bluetoothaudiod	processAppleCommand: 000D-0001-0101,2
default	08:43:12.951298+0900	bluetoothaudiod	Vendor:d productID:1 version:101 features:2
default	08:43:12.951328+0900	bluetoothaudiod	sendingATCommand: +XAPL=iPhone,15
default	08:43:12.962656+0900	bluetoothaudiod	sendingATCommand: OK
default	08:43:13.018732+0900	bluetoothaudiod	processATCommand: AT+VGM=9 state:2
default	08:43:13.018790+0900	bluetoothaudiod	processMicVolumeChange:9
default	08:43:13.018871+0900	bluetoothaudiod	sendingATCommand: OK
default	08:43:13.024907+0900	bluetoothaudiod	processATCommand: AT+VGS=15 state:2
default	08:43:13.024972+0900	bluetoothaudiod	processSpeakerVolumeChange:15
default	08:43:13.025060+0900	bluetoothaudiod	sendingATCommand: OK
default	08:43:13.027429+0900	bluetoothaudiod	processATCommand: AT+IPHONEACCEV=1,1,9 state:2
default	08:43:13.027482+0900	bluetoothaudiod	processAppleEvent: 1,1,9
default	08:43:13.027528+0900	bluetoothaudiod	Battery level is 9
default	08:43:13.027566+0900	bluetoothaudiod	sendingATCommand: OK