As per StudioX
Here's the way I do a clean install -- erase the drive- install the OS- run updates on the OS until there are no more- repair permissions using Disk Utility- Insert the FCS disk- Run FCS installer- repailr permissions using Disk Utility- Run Software updater until there are no more updates- repair permissionsBe sure ....1. DO NOT change the default installation settings for either OSX or FCS2. If you have issues running the software, remove all externalconnections leaving only the keyboard. mouse and monitor.
Be sure ....
1. DO NOT change the default installation settings for either OSX or FCS
2. If you have issues running the software, remove all externalconnections leaving only the keyboard. mouse and monitor.
For people interested in a more complicated but perhaps better way.
"This multi-part tutorial suggests a long term strategy designed to produce a problem-free install, and a quick reinstall if problems should arise again — with the proviso that you spend a one time spare afternoon preparing the necessary files and materials. The strategy is intended to produce long term results and far less down time."
Unfortunately, I can't seem to link directly to this tutorial. Go to
and navigate to the appropriate tutorial under "featured tutorials."
"Reinstall OSX & FinalCutStudio The Right Way"
And a note on installing fcp6 in Lion (not sure about mountain lion). But first, be aware that fcp6 and 7 are no longer in development and do not be surprised if you see problems when working with them on Lion or Mountain Lion. This is not from personal experience rather this is from past experience. The older your apps, the more likely you'll have problems running them on newer OS's.
And now to return to our previously scheduled program:
You'll either need to install rosetta from your snowleopard install disk (I've done this and it works)
or use this technique
(which I haven't done).