91363 Views 143 Replies Latest reply: Jan 26, 2014 6:43 AM by LightningMike
Currently Being ModeratedSep 21, 2009 9:03 PM (in response to Aaron Scott)What are you using for an ethernet cable? Is it rated CAT5e or CAT6?
Currently Being ModeratedSep 21, 2009 10:15 PM (in response to BSteely)I've tried both Cat5e and Cat6MacBook Pro Santa Rosa 2.2GHz, Mac OS X (10.6)
Currently Being ModeratedSep 24, 2009 12:48 PM (in response to Aaron Scott)i've had the same issue. 100 base works fine. Either thru the cabling in my wall or directly plugged into the switch. (5e in the wall, 5e to it, 5e to the switch). Try to force gig, says no cable is plugged in.
got some cat6 cable. I swear i got gig for 1 morning plugged into the wall (mini cat6 to wall, cat5e wall to router). but now neither plugged into the wall, or the cat6 to the switch it self will gig work. No issues at all with 100base though. its baffling and i have no idea how to fix.2009 mini, quicksilver g4 and 8gb touch, Mac OS X (10.5.7)
Currently Being ModeratedOct 26, 2009 5:21 PM (in response to Aaron Scott)Same problem here. Mac Mini wont connect gigabit to an Airport Extreme. It's not my cable. If I take the cable and plug into my macbook, it connects gigabit. When I plug into my Mac Mini it connects at 100. If I force 1000, it says ethernet not connected.
I'm not sure when this started. I only recently noticed when media over the network began to get choppy and I went and checked what link speed I had.
I've upgraded to Snow Leopard and I'm current with all updates.
Help... anyone!MacBook and Mac Mini, Mac OS X (10.6.1), iPhone 3GS
Currently Being ModeratedOct 28, 2009 8:16 AM (in response to Aaron Scott)I had problems using a Linksys 4 port switch. I condemned the switch but I think its Snow leopard.
I reinstalled Snow leopard and have had no problems. Even though not everyone has had these issues and it may be connected to what hardware we use for networking. The end result is that SL does not seem to like some networks? I have given up knowing why and just use leopard until Apple addresses the issue.Mac Mini 2009, Mac OS X (10.6.1)
Currently Being ModeratedNov 18, 2009 6:20 AM (in response to John Scott1)Reporting same problem here, my new mac mini just arrived yesterday, tried on 2 totally different networks, initially ethernet is correctly set on 1Gbit, then after a while, randomly, it either switches to 100Mbit, 10Mbit or no connection at all.
Setting it to 1000Gbit manually just disconnects it as a whole.
I was thinking it to be a hardware failure 'til I found this thread... will have to switch to Wireless 'til someone gets a clue... so much for Gigabit networkingmacmini 2.26Ghz late 2009, Mac OS X (10.6.2)
Currently Being ModeratedNov 21, 2009 11:02 PM (in response to Aaron Scott)Add another Mac Mini to the list where it will not connect in automatic or forced 1gigabit. I manually drop it to 100mbits, it connects. As the others say, I have tried known good cables and multiple switches. I am at the latest OS.
-DaveMac Mini (Intel), Mac OS X (10.6.2)
Currently Being ModeratedNov 23, 2009 4:14 PM (in response to daverx7)For the record, my mini is doing it too. I didn't know what the problem was, but my ethernet just wouldn't connect, so I was forced to connect via wireless. When my Verizon FIOS wireless got flaky, I got more annoyed with my ethernet not connecting, which prompted my google search and led me here.
After reading the discussions, I switched to 100Mb/s half-duplex, and it connected right up. I've got a G5 and a G4 connected to the same switch at 1000Mb/s and have interchanged the cables, and the mini just will not connect at a gig.MAC, Mac OS X (10.6.2)
Currently Being ModeratedNov 25, 2009 8:25 AM (in response to daverx7)Hmm... anyone there? It certainly doesn't look like an isolated issue here.
^^bump^^Mac Mini (Intel), Mac OS X (10.6.2)
Currently Being ModeratedNov 27, 2009 3:43 AM (in response to daverx7)I don't think this only an issue for the mini. We have problems connecting to our Gb switch with iMac and Mac Pro machines, but the wiring is old and some drops work where others connect and disconnect or will only connect at 100 Mb. For one office we ran a new drop and that solved the problem. The ports that don't work sometimes show problems (e.g., "low signal on pin x") with a cable tester.
The old drops are in conduit, and never were reliable with SGI Octanes at 100Mb, so are clearly marginal, but booting the Mac's with Knoppix linux sometimes works when the Apple networking falls down, and windows machines don't appear to have problems (but we know from experience that windows is prone to duplex mismatches -- it is just that user expect Windows to be slow so don't notice). I have also had a case where connecting a Gb box to one drop seems to cause
disconnects on another drop -- not sure if this is a problem in the switch or maybe crosstalk between cables that share a conduit.
When we have problems, the log often has:
fuji mDNSResponder: Note: Frequent transitions for interface en0 (X.X.X.X); network traffic reduction measures in effect
Once this happens you may need to delete the interface in Net Prefs and "redo from start".many, Mac OS X (10.5.8)
Currently Being ModeratedNov 27, 2009 7:44 AM (in response to gnwiii)FWIW: I have a Mac mini2,1 Intel Core 2 Duo 1.83 GHz connected to a NetGear 1Gbit 8-port switch via a 6ft Cat5e cable, and I've never, ever, had any problems at connecting to it automatically at 1Gbps. So it can be done.MacPro + MXO - and a MacMini and iPod Touch for fun stuff!, Mac OS X (10.5.7)
Currently Being ModeratedNov 29, 2009 4:43 PM (in response to mooblie)I have a new 2.5.3 Mac Mini and a 1.66 duo core. They both connect to the Airport, a five port linksys gig switch and 8 port linksys switch perfectly. Unless you are running very long runs (300ft) there is no difference between Cat 5 and Cat 6. The gig mac layers developed are so much better than previous ethernet mac layers spending money on cat 6 is a waste of money. Make sure the switches are not managed and have the ports locked down. With older switches you might need to power cycle them, also some switches have uplink ports that can behave weirdly.mac pro
Currently Being ModeratedNov 29, 2009 4:56 PM (in response to email@example.com)for those of you using in wall wiring. There is quite a difference between 100Mb and Gigabit. 100Mb will run over cat 5 connections even with a wire in the wrong location. (i.e. the A configuration vs the B configuration) 1000 is a different story. It uses all 8 wires and they all have to be in the right connection. After we wired my house I bought a cable tester and found several wires not punched down or switched.
We have also seen several issues with cheap patch cords. About a year ago I went out a bought a,, new good quality patch cables.
hope this might help.
This may be stupid info, but remember when you are looking at the light indicator, it indicates the signal at the other end of the cable. so if you see a wrong LED config on switch A, it is switch B that has the issue. Same is true for a systems ethernet connection if not a switch.mac pro
Currently Being ModeratedNov 30, 2009 6:32 AM (in response to firstname.lastname@example.org)Thanks to those posting in this thread. It is good to know that it is being looked at by the community.
I have to say that this problem is odd as when I 1st got my Mini, I was able to go 1Gbits... then it stopped connecting via Ethernet. That is when I switched to wireless to just surf. With it turning into my main media PC in the home theater, I have to go wired and believe I need 1Gbit.
To test my in wall cabling, I got a $10 (i.e. CHEEEEAP)cat5 tester that will check for line breakage and if the lines are crossed, and all is good there. For the price of the tester, it does not test for the quality of the connection... It is better than nothing tho.
For this particular Mini issue (still fighting a color static from time to time) and to get get things ready for putting media PC's around the house, I decided to up the network infrastructure a bit. With this being said, I got an HP Procurve 1800-24G, and my Mini is directly connected to it... Still 100Mbits.
*I made sure the switch was at factory defaults... Still 100Mbits
*I updated the firmware on the switch... Still 100Mbits
My next step is to start from scratch on my cables and go overboard and get Cat6 cables from monoprice. They are on order, and will post the results when they come in.
Another thing I could try is go back to the original OS and see what happens, but I really do not want to do that.
I have a feeling that I will end up having to buy a $200 Acer Aspire Revo and run XBMC to do the work that the Mini is struggling with. Ugh.. So disappointed with this situation.
-DMac Mini (Intel), Mac OS X (10.6.2)