Skip navigation

iMac won't wake up from sleep using keyboard or mouse

256458 Views 548 Replies Latest reply: Apr 18, 2014 3:27 PM by effortlesszone RSS Branched to a new discussion.
1 2 3 ... 37 Previous Next
Jon Israel Calculating status...
Currently Being Moderated
Nov 5, 2009 7:38 AM
I'm not sure what is happening but as of today neither of my wireless devices will wake the iMac - no problem use keyboard and mouse once the iMac is awake. Yesterday I had problems with the wireless keyboard disappearing from Bluetooth.
Now I have to press the power button if the iMac goes to sleep and even then it is a bit slow to respond. It is real pain in the face. What is the remedy anyone?
iMac 21.5 inch, Mac OS X (10.6.1)
  • Mary Scott Calculating status...
    I have the identical problem. Apple told me it was likely an internal bluetooth issue that requires taking the computer in for diagnosis/repair.
    iMac 21.5", Mac OS X (10.6.2)
  • RobinPG Calculating status...
    I'm having the same problem, which just started. it won't wake up from my keyboard or my wireless mouse. I then attached a wired mouse and tried that but it won't work. It won't even work if I press the power button in the back briefly. I have to hold the power button down for a good 5 seconds to turn it off, then re-start it.
    Imac Intel, Mac OS X (10.5.8)
  • Mike457 Calculating status...
    Put me down for a me-too. The option to wake up by bluetooth devices is grayed out and I have to turn the computer on and off. My "solution" has been to set the computer not to go to sleep. As I'm not anywhere near the Apple Store where I bought this, I would love to have a solution that doesn't require two three-hour round trip drives (one to drop it off, one to pick it up).
    Intel 27" iMac 2.66GHZ (late 2009); Macbook Pro (late 2008) 2.4GHZ, Mac OS X (10.6.2)
  • Sascha H-K Level 2 Level 2 (330 points)
    same here with i7. (imac week 50)

    4x in 7 days ..

    called apple on 8th jan., they will exchange the imac.
    MBP 17" 3.06 SSD, iMac 27" i7, G4 1.42, macbook pro 17" 2.4 4Gb, iPhone16Gb .., Mac OS X (10.6.2), MBP 17" 2.93, MacPro 3ghz, 30", 23",20" displays, TV, 5 airportExtreme ..
  • kevindeleon Calculating status...
    Put me down for the same problem. Am NOT looking forward to having to either send this behemoth back, or driving 4 hours round trip to the nearest Apple store :/ Have tried reinstalling, clearing SMC and PVRAM/NVRAM.
    iMac 27" i5, Mac OS X (10.6.2)
  • Lolipale Level 1 Level 1 (0 points)
    I have the same problem too. The only way to wake up my new Imac is to made a force shutdown. I'm waiting for a true solution. At this moment, I don't think if these problems are hardware or software.
    Imac 27' i5 8Gb Ram, Mac OS X (10.6.2)
  • binaryimages Calculating status...
    I have same problem, anyone find a solution yet.
    iMac i5, Mac OS X (10.6.2)
  • lawprofs Calculating status...
    Same problem... Any solutions?
    27" i7 i Mac, Mac OS X (10.6.2)
  • Sascha H-K Level 2 Level 2 (330 points)
    i yesterday installed "smart sleep", seems to help ..
    (www.macupdate.com)

    will be in the prefs.pane with setting sleep only.


    beside this my replacement i7 is since today on the way.
    MBP 17" 3.06 SSD, iMac 27" i7, G4 1.42, macbook pro 17" 2.4 4Gb, iPhone16Gb .., Mac OS X (10.6.2), MBP 17" 2.93, MacPro 3ghz, 30", 23",20" displays, TV, 5 airportExtreme ..
  • Sascha H-K Level 2 Level 2 (330 points)
    maybe not bluetooth, as when i connect "something" to the usb-port also nothing happens ..

    have to pull at least the cord for re-start.
    MBP 17" 3.06 SSD, iMac 27" i7, G4 1.42, macbook pro 17" 2.4 4Gb, iPhone16Gb .., Mac OS X (10.6.2), MBP 17" 2.93, MacPro 3ghz, 30", 23",20" displays, TV, 5 airportExtreme ..
  • canyonblue Calculating status...
    I too have have this issue with my 21.5 iMac. I don't have a true fix, but after a month I found a 100% reliable way of getting the system to wake from sleep.

    This assumes the computer is already asleep at the start of my procedure and that in the prefs panel you allow the computer to be PUT TO SLEEP with the power button...

    1) Click keyboard or mouse to wake computer from sleep. Nothing happens but actually the computer HAS woken up, just not the screen... sorta. In fact if you move less than an inch away from the screen and look at various angles you might see the almost imperceptible hint of what is on the screen.

    2) Momentarily press the power button. This will put the computer BACK to sleep.

    3) Wait about 10 seconds for the computer to return to sleep.

    4) Press the keyboard again, this time the computer will wake normally.

    Why this works, or what is happening I certainly don't know. I have reset PRAM, Video card etc. with the apple procedures but it doesn't help. Hopefully a software update fixes this full in the future but this certain makes the computer "useable" again for me.
    iMac 27 i7 2.8, Mac OS X (10.6.2)
  • Fernbergjim Calculating status...
    I have the same problem with my imac quad i7 27" . I have a wired keyboard and the wireles magic mouse (the new mouse).
    The problem is intermittent. I never normally turn off my machine and usually just walk away from it and when I come back, if I'm lucky, I wake it by moving the mouse or hitting the escape key on the keyboard.
    If it is having a bad day it doesn't wake and I have to hold down the start button until I hear it click off (about 6 seconds) and then start it normally.
    Strange thing is it is not related to any time frame. It can wake from sleep after a day or a couple of hours then same conditions and it doesn't wake.
    Have tried to wake using the power button (have it set to wake from power button) and it never works when the mouse or keyboard doesn't work.
    The replies posted here don't provide any comfort that a lasting solution has been found. There is also a thread on Macrumors that deals with the same issue. No joy from that thread either.
    Is there somehwere else I can turn. Iam located in Brisbane Australia.
    cheers
    imac 2.8 i7 8gb RAM 1TB, Mac OS X (10.6.2)
  • makloklin Level 1 Level 1 (0 points)
    I have the same problem, although it only seems to happen when I choose sleep from the apple menu, and even then only when it is left sleeping overnight. Fernbergjim, can you tell me where you set your computer to wake with the power button? All I have been able to find is "Sleep Computer with Power Button" on the Energy Saver pref pane.

    I am on my second iMac. I returned the first one with screen problems and they replaced it, but it is a pain in the ***. A round trip takes me about five hours and two ferries. I hope this is a software issue.

    Message was edited by: makloklin
    iMac 27" quad core i5 2.66GHz, Mac OS X (10.6.2), 4 GB ram
1 2 3 ... 37 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (31)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.