This discussion is archived
17127 Views 18 Replies Latest reply: Jul 13, 2010 5:01 PM by noice_T
Currently Being ModeratedNov 29, 2009 11:47 AM (in response to DMarsh)http://www.brendanfenn.com/cleanmouse.html
http://code.maxmayo.com/2009/03/how-to-fight-mighty-mouse-scrolling.htmlMBP 17" 3.06 SSD, iMac 3.06, G4 1.42, macbook pro 17" 2.4 4Gb, iPhone16Gb .., Mac OS X (10.6.2), MBP 17" 2.93, MacPro 3ghz, 30", 23",20" displays, 5 airportExtreme ..
Currently Being ModeratedNov 29, 2009 12:09 PM (in response to DMarsh)Also see here.
http://support.apple.com/kb/HT1537?viewlocale=en_US27" i7 8GB, 24" iMac 2.8, 1.8SP_G5, (iBook/600, iPod 15), Mac OS X (10.6.2), Willis Faber Slide Rule
Currently Being ModeratedNov 29, 2009 12:34 PM (in response to DMarsh)yes, but if nothing goes the 2nd is 100% helpfull ..
p.s. apple's solution is only good for "light" problems.MBP 17" 3.06 SSD, iMac 3.06, G4 1.42, macbook pro 17" 2.4 4Gb, iPhone16Gb .., Mac OS X (10.6.2), MBP 17" 2.93, MacPro 3ghz, 30", 23",20" displays, 5 airportExtreme ..
Currently Being ModeratedJan 23, 2010 11:37 AM (in response to DMarsh)I turned the mouse upside down then rubbed the scroll ball with my hand really fast and kept at it to get the ball warmed up from the friction, the idea being to burn and wear the dirt out with heat, speed and brute force
Crude, but it's working againiMac, Mac OS X (10.6.2)
Currently Being ModeratedFeb 4, 2010 2:17 PM (in response to DMarsh)I put a drop (and only one drop) of 70% isopropyl alcohol on the ball and spun the ball with my index finger and then with a lint-free rag (an old linen handkerchief). Let dry for 10 minutes. Worked for me.2.66GHz Intel iMac 4 GB SDRAM, Mac OS X (10.6.2)
Currently Being ModeratedFeb 4, 2010 11:15 PM (in response to Sascha H-K)The second one totally worked for me! (I tried the tape but I could not even get it to feed through all the way; I wonder if we need shiny magic tape?) Thanks Sascha and MaxMayo!!3.06 GHz iMac 24", Mac OS X (10.5.7), 4 GB RAM
Currently Being ModeratedFeb 5, 2010 12:24 PM (in response to DMarsh)Before I abandoned my mighty mouse for a magic mouse this is how I cleaned the ball when it would stop working:
1. Wash your hands so that they have nothing on them to contaminate the mouse further.
2. Take a Q-tip (aka cotton swab), and dip it in some rubbing alcohol, roll the moistened tip on a towel to remove the excess.
3. Run the Q-tip over the ball in all directions, occasionally stopping the ball from rolling with a fingernail. Do this until you no longer see any evidence of dirt/lint coming from the ball. You might have to use the other end of the Q-tip, and redo step 2, to continue cleaning the ball if the first end becomes overly dirty.
The most important thing to keep in mind is that anything you have on your mouse hand is going to gum up the ball, so make sure that hand is clean. No eating chips, etc with that hand.iMac With 3.06 GHz Intel Core 2 Duo, Mac OS X (10.6.2)
Currently Being ModeratedFeb 7, 2010 12:56 AM (in response to Ashtree)The only other thing i would add is to not use your hands at all. hands have oil on them no matter how much you clean your hands. Use a lint free cloth when touching it to clean it. If you periodically use a lint free cloth to clean it, you shouldnt have that many problems.
bryce24"iMac 3.06GHz, Mac OS X (10.6.2), Also have a PB G4 1.25GHz
Currently Being ModeratedFeb 12, 2010 4:14 AM (in response to DMarsh)Hi,
Had the same problem with two of my mighty mice one USB the other Wireless.
Spoke to a chap at apple support and got a different suggestion for cleaning that worked to clear both mice without disassembling or using damaging cleaning agents.
1 Disconnect the mouse.
2 Place mouse upside down on a clean piece of paper
3 Scrub the mouse ball hard on the paper - debris will start to appear
4 Plug the mouse in and hopefully its fixed, if not just repeat.
(Make sure to keep using clean paper. It took a few attempts but eventually both mice are now working like new again.)
Message was edited by: MarshmansmithyMighty Mouse, Mac OS X (10.6.2)
Currently Being ModeratedFeb 12, 2010 5:15 AM (in response to DMarsh)Cleaning seems to be only a temporary solution. Had two go at about the same time. Turning it over and running it on something absorbent worked sometimes. Complete breakdown and cleaning worked about the same. Dripping alcohol in while pressing down on the ball was only marginally successful. Finally, gave in and bought a Magic Mouse for the one 24" iMac and a replacement wireless Mighty Mouse for the other. Both are working fine so far. The Magic Mouse is by far the best mouse I've ever used, and highly recommend that over anything out there.2-24" iMacs, 2-Aluminum 13" MacBook/MB Pro, Mac OS X (10.6.2), http://macroads.com
Currently Being ModeratedFeb 22, 2010 7:13 AM (in response to Marshmansmithy)Marshmansmithy's suggestion worked for me. I unplugged Mr Mouse and gave him a serious upside down rolling around, pressing really hard, on a sheet of white paper.
At the first attempt there was no improvement.
At the second attempt I pressed REALLY hard and out came a lump of gunge, on to the white paper, which could only have been insde the mouse. It couldn't have come from anywhere else.
So now me and Mr Mouse are friends again.
Thanks MarshmanMacBookPro 13" (Nov. 2009) + various old Macs,, Mac OS X (10.6.2), chair, table, coffee, phone, etc.