187243 Views 336 Replies Latest reply: Nov 2, 2013 4:49 AM by Drew Reece
Currently Being ModeratedJan 21, 2010 3:09 AM (in response to lebungleski)This reply is later than the rest but may be useful for he who is not too sure about going for and Apple Cinema Display. My display just died... Probably due to a power surge... I get the same blinking long-short-long LED light... So, i take it to the local apple distributor and they try with a 150W power adapter without success. They then tell me that they do NOT repair the displays in Spain. I then get on to Apple Tech Support by phone. After taking to a guy that had even less idea than myself for about 20 minutes, he comes to the conclusion that nobody in Spain repairs. So as i dont have apple care, and they dont repair, I have no solution whatsoever. Nice!MacBook Pro, Apple Cinema Display
Currently Being ModeratedFeb 18, 2010 10:11 AM (in response to jakobeon)I tried the fix that Jakobeon suggested and IT WORKED! It is a little tough to do, since the strip has to be very skinny to cover just the middle pin and nothing else, but worth trying for a bit. I could not get the paper to work as described though. The paper kept breaking when I slid the plug in. I decided to try thin plastic. Actually a sliver off the dvi converter that came with the mac. The plastic was strong and thin enough to work, but it did take a few tries to get everything in the right spot.
Jakobeon, whoever you are, you are a genius. Thanks. Saved me money and down time. From error, to discussion board, to fixed monitor was only about an hour.Mac Pro, Mac OS X (10.4.11)
Currently Being ModeratedFeb 25, 2010 3:48 AM (in response to lebungleski)It worked for me too- just don't take the paper back out as it stops working.
All good in the world indeed!Mac Mini, Mac OS X (10.5.8)
Currently Being ModeratedMar 1, 2010 10:18 AM (in response to jakobeon)Brilliant!
Worked like a charm. On the phone with Apple to try to get a better solution.
Tired of this $$$ gear going south and having to pay more $$$ even get it looked at. Especially when a bit of paper solves the problem.MacBook Pro, Lots of Apple Gear
Currently Being ModeratedMar 3, 2010 5:08 AM (in response to deceptinator)Totally same problem for me following a power outage, even though the 23" is plugged into a UPS which did a controlled shutdown. Works with the 150W power brick from my 30".
Luckily I have Applecare and it has 1 month left If the only fix is a new monitor then it's nice to get one after 2 years and 11 months.
Appointment fixed for Genius Bar on Saturday. Will report what they say.
DavidMac Pro Dual 3GHz, 15GB RAM, ATI 3870, 30" ACD + 23" ACD, Mac OS X (10.6.1), MBP 17", iMac Intel 20", G4 Mini, MBA 1.8 (2nd Gen)
Currently Being ModeratedMar 7, 2010 11:49 AM (in response to David Thorpe2)So I am to get a new display. Except I suspect it will be refurbished. Slightly disappointed because the one I have is fine with a bigger power supply (i.e. the one from a 30") and the Genius said he would have been happy to let me have one but there was no way to process it because that power supply doesn't belong with that display. Shame because the display is pixel perfect and I hope the replacement is as good.Mac Pro Dual 3GHz, 15GB RAM, ATI 3870, 30" ACD + 23" ACD, Mac OS X (10.6.1), MBP 17", iMac Intel 20", G4 Mini, MBA 1.8 (2nd Gen)
Currently Being ModeratedMar 12, 2010 8:07 AM (in response to deceptinator)Have the same issue as the people in the thread. I can't quite visualise the fix - either with the W-shaped piece of paper or with the bit of plastic.
Can anyone draw it or take a photo?
Thanks,Macbook Pro, Mac OS X (10.6.2)
Currently Being ModeratedMar 15, 2010 2:17 PM (in response to matimac)I figured it out. Pretty neat. If it can help anyone I created a short video of the fix. Available on Youtube: http://www.youtube.com/watch?v=vodDfic8omA
Currently Being ModeratedMar 16, 2010 4:01 PM (in response to matimac)Now also with photo.
Currently Being ModeratedMar 18, 2010 10:18 AM (in response to matimac)Wow! Just fixed my ACD which was blinking short-long-short by inserting a piece of paper over the middle pin. Thanks guys! You saved me a lot of time and money.
By the way - on the youtube video, I think you mean "short-long-short" not "long-short-long".MacPro, Mac OS X (10.5.8)
Currently Being ModeratedMar 20, 2010 2:06 PM (in response to lebungleski)Hello everyone!
i recently bought a broken Cinema Display from eBay with a missing Power cord and adapter.
Then i ordered a 90W Power adapter and the whole cable from Hongkong.
Unfortunately, the cable was designed for an 20" inch Display which I intended to replace after having the 23" fixed.
So i cut the cable off, soldered everything back together and boom- it worked like a charm.
Then i also had solder the Usb cable which is not such a big problem.
Everything im PLace covering the whole cable with tape.
I had the same problems with my 90w Power adapter, the Mac would'nt go to sleep anymore, it was powering up shortly after.
PLugged the 90w Power Adapter to my 20" which produced only some random flickering.
Then plugged the 90w back to the 23" and same Problem!
So the 90W was dead.
I ordered an 150w POwer Adapter from England and........
The DIsplay works just like it should.
IN the End i got a 23 " Display (with a bit of tape on the cable) for the same Price as my 20" that i also bought in used perfect condition from ebay.
Not to mention that the 23" was a shop model which is in perfect condition and that shop party usually seem to be military-grade products
hope this works or is interesting for other people!Mac Pro, Mac OS X (10.6.2), 23" CInema HD iPhone 3gs
Currently Being ModeratedMar 23, 2010 7:47 AM (in response to Goose815)I just got off the phone with Apple support (and then customer relations), and they told me there is nothing they could do (or were willing to do). Our monitor was out of warranty and we had to pay to fix it.
It would be one thing if we had broken the monitor ourselves, but something about the screen is clearly defective if it breaks just moving it from one machine to another.
That's the last Apple display we'll buy, that's for sure.Many, Mac OS X (10.6.2)
Currently Being ModeratedMar 26, 2010 1:27 AM (in response to bbrazelton)Thanks. Youtube annotation corrected to short-long-short.Macbook Pro
Currently Being ModeratedApr 1, 2010 1:01 PM (in response to lebungleski)I too am having the "short-long-short" error problem with my 23" Apple Cinema Display that is 15 months old.
I returned home last night after being away for five weeks. The display is attached to a surge protector, but both the display and surge protector were unplugged while I was away. When I plugged in the display and reconnected to my MacBook Pro the display remained black and the power light flashed the short-long-short code.
I made an appointment at the Apple Store and they were able to power up the display with the 150-watt power adapter with no problems. They tried a brand-new 90-watt power adapter and it didn't work. Same issue I described above. They offered a $399 flat-rate repair, which I declined.
Something is wrong with the displays in general since so many are experiencing this failure. I called AppleCare (didn't know they offered it for displays only) and they agreed to repair the problem. I have to take the display back to the Apple Store.
If you are experiencing this problem I would encourage you to post a reply to this thread, even if you're just repeating what others have said.
For such an expensive display this sort of problem is disappointing and even more so since Apple doesn't even offer a option to buy a new one. They need to offer a matte-screen option for the 24-inch LED display.MacBook Pro Unibody, Mac OS X (10.5.8)
Currently Being ModeratedApr 1, 2010 2:44 PM (in response to egieszl)My 23" went down last Thursday (25 March). I went to my recording studio and fired everything up as normal. I then shut it all down and went out to buy a new printer as my Epson C86 had crapped out. When I got back I powered up, and – lo and behold – the monitor didn't work. First the printer, then the monitor. Nice week, eh? Luckily I have a 20" packed away, so I connected that and I was able to work again.
Later that night I did a web search and found this thread. It's got to be a similar issue to everyone here, although I cannot be positive without taking it to the Apple store. I'm sure a 150W power supply is the fix, at least short-term.
A couple of days ago I attempted Jakobeon's little trick. It didn't work for me, although I'm sure it had more to do with me not getting the paper in the proper position. That's just too small a space for my fat little guitarist fingers to work with.
My question is then is to all the people who have obtained a 150W power supply – are you experiencing any problems?? Is that fix still working for you?? Does anyone know if this is fix is long-term?? I plan on buying one, but I'd like it to be 'the answer'. I see them on eBay at a decent price, but all the sellers are located in Hong Kong.
Thanks to all for your time. Cheers...PowerMac G5 Dual 2.5GHz, Mac OS X (10.5.6)
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points