This discussion is archived
23000 Views 33 Replies Latest reply: Sep 25, 2010 8:00 AM by sdirghalli
Currently Being ModeratedJul 1, 2010 5:44 AM (in response to JPSabo)This is only an occasional occurance with me. Normally, the iPhone 4 connects immediately to my microcell when I get home. You might want to try to restart your microcell, if you haven't already.
glorMac Mini 2.53GHZ/8GB/Blu-ray/500GB Seagate Hybird, Apple 24" LCD Display, Mac OS X (10.6.4), iPhone 4 32GB, iPad 3G 64GB
Currently Being ModeratedJul 1, 2010 6:41 AM (in response to JPSabo)I have exactly this problem, and some do not.
When I am not on the phone, in 3G coverage, and come in the house I do not find the microcell on my iPhone4 and my wife's 3GS. This happened only after upgrading to OS4. I know some people have this problem and some do not. If you put it into airplane mode so you get Searching... it will find the microcell 100% of the time, with 5 bars. So those people who have really terrible coverage may have the phone go into Searching... mode by itself, connect to the microcell, and you may think it is working fine. I know some people do not have this problem and can connect just fine.
I have tried resetting network settings and just got a replacement microcell with the same problem. Are others seeing this? I know some are and some are not. I have a case opened with AT&T and if you have this problem please go open a case with them - the more the better. Once again - this is not an iPhone4 issue but an iOS4 issue.MacBook Pro 17", Mac OS X (10.6.3)
Currently Being ModeratedJul 1, 2010 7:37 AM (in response to Nathan Goldshlag)Yep...I restarted the MicroCell after relocating it from the window (so it could acquire a GPS signal to get set up).
I also notice that this problem occurs when the iPhone goes into standby (eg. locked and not accessed overnight). When I went to use it in the morning, it was accessing the 3G cell tower and required toggling airplane mode to get the MicroCell signal.
I also walked out of range of the MicroCell so that the iPhone would switch to the cell tower 3G, which it did just fine. But when walking back into range of the MicroCell, the iPhone did not switch back to the MicroCell signal.
In addition to posting here, I also emailed Apple Tech Support as well as AT&T.
JohnMacPro, Mac OS X (10.4.10)
Currently Being ModeratedJul 1, 2010 9:54 AM (in response to JPSabo)It's interesting that some see it and some don't. If it was a systemic problem, all iPhone/iOS4 devices would have this issue. I wonder if it can be regional.
GlorMac Mini 2.53GHZ/8GB/Blu-ray/500GB Seagate Hybird, Apple 24" LCD Display, Mac OS X (10.6.4), iPhone 4 32GB, iPad 3G 64GB
Currently Being ModeratedJul 2, 2010 6:28 PM (in response to Glorfindeal)Got a reply from AT&T in which they asked me to call them to work on this issue. I just replied that my email should be forwarded to the MicroCell engineering staff.
Interestingly, my wife's iPhone 4 switches over to the MicroCell, but mine does not...and my iPhone 4 is the primary number used for the MicroCell. This situation seems to be commonly reported in that the primary number has the problem acquiring the MicroCell signal.
Despite the connection problem difficulty, the MicroCell does work well. Had a 61 min call this morning with no drops and clear voice.MacPro, Mac OS X (10.4.10)
Currently Being ModeratedJul 3, 2010 3:36 AM (in response to JPSabo)I do not believe it has anything to do with the primary number. Both my iPhone4 (primary number) and my wife's 3GS have the problem after upgrading to iOS4. With 3.1.3 my former 3GS and hers worked fine.MacBook Pro 17", Mac OS X (10.6.3)
Currently Being ModeratedJul 3, 2010 11:29 AM (in response to Nathan Goldshlag)Seems it some sort of hand-off issue. I just returned home and as I was walking to the house my iPhone 4 picked up my wifi signal (from the Airport Extreme), progressively dropped bars on the cell tower 3G signal (as expected), but it never picked up the 3G MicroCell signal. Once inside, I checked the MicroCell and all lights were operating as expected, and I then toggled airplane mode on the iPhone. The wifi signal locked in first, followed by the MicroCell signal. I have the MicroCell located about the center of the house on the first floor about 6 feet off the floor to give optimum signal.MacPro, Mac OS X (10.4.10)
Currently Being ModeratedJul 3, 2010 12:22 PM (in response to JPSabo)I am having the same issue. I've had a Microcell in my office for several months. I had a 3GS which always picked up the Microcell without issue. Since moving to the iPhone 4, the phone only picks up the Microcell sporadically at best and stays on the Macrocell network. The phone is definitely at fault - I have a work issued Samsung Rugby II that picks up the Microcell right away, just like my 3GS did.
I'm guessing this is a software issue and will be corrected in the next update. I can't imagine how anything hardware related would cause this issue. There's obviously something wrong with the logic the phone uses to select cell sites. Other than this issue, my iPhone 4 has been working great.iPhone 4, iOS 4
Currently Being ModeratedJul 10, 2010 10:47 AM (in response to Nathan Goldshlag)I have the exact same issue... two iPhone 3G's that worked fine with the microcell for the last two months, but since upgrading to IOS4, virtually no service despite five bars. Same thing with my new iPhone 4.
I can send/receive text messages, but have a nearly 100% fail rate on outbound calls with the 3G's and about 90% fail rate with the iPhone 4. Inbound calls generally go straight to voice mail after one ring.
This sure seems like an IOS4 / Microcell compatibility problem from my perspective.
Any clues on how to downgrade a iPhone 3G to v 3.1.3 of the software?
Currently Being ModeratedJul 10, 2010 12:57 PM (in response to Nathan Goldshlag)Hey –
I set up the Microcell yesterday. Easy. Came up with 5 bars within about an hour. My iPhone 3GS picked it up. I was very pleased. The phone went to sleep. When next awakened, I had only a crummy 3G signal. I rebooted. No success. I rechecked my settings. I toggled Airplane mode off then on. I even restored. I called AT&T local. They thought it might it might be the SIM card, but recommended I call their tech support. They had no ideas but thought the SIM card could be bad. I now have a new SIM card and a 3GS that does not see the Microcell. My husband just got home from a trip with his 3GS. It picked up the signal right away and held it. He then transferred his SIM card to his new iPhone 4 and synced – it also picked up the Microcell and held it. We concluded that it was my 3GS that was the problem. So we put my SIM card in his old 3GS, and it would no longer pick up the Microcell. The Microcell is not the problem. I think I'm going to try getting AT&T to lean on Apple.
Message was edited by: Miss Julia
Message was edited by: Miss JuliaMacBook Pro 2.53 Duo + Dual 2.5 G5 + iPhone 3GS, Mac OS X (10.6.4)
Currently Being ModeratedJul 10, 2010 7:34 PM (in response to tthiel1)Hey – My husband's new iPhone 4 works great with it. It's my 3GS that is not working. I called AT&T tech support again (800-331-0500) and they went through a bunch of stuff with me. Didn't fix it, so they have a ticket and have promised to get back to me by the evening of the 14th for a resolution. I'll post when I know more. This seems to affect just some phones. We both have iOS4 installed, but, from what has been posted here, it looks like the problem did not show up until the new OS. The tech person I talked to has found this thread. We may get an answer pretty soon.
Miss JuliaMacBook Pro 2.53 Duo + Dual 2.5 G5 + iPhone 3GS, iOS 4
Currently Being ModeratedJul 12, 2010 6:47 PM (in response to JPSabo)I thought that resetting network under settings solved the problem. It did NOT. My wife's 3G iPhone that is not iOS4 has no problems. My 3Gs iPhone had no problems for a month. Now that I upgraded, only problems. Phone does not find microcell unless I do network reset or power cycle phone. only stays locked for a few hours. Then drops and will not reconnect.G5, Mac OS X (10.4.10)