10907 Views 20 Replies Latest reply: Mar 23, 2011 6:07 PM by Allen Huffman
Currently Being ModeratedNov 11, 2010 5:31 AM (in response to Racra)Edit:
before update to 10.6.5 none problems
Nov 11 13:59:08 MacBookAlu kernel: IOUSBMassStorageClass[0x14070400]: The device is still unresponsive after 6 consecutive USB Device Resets; it will be terminated.
Nov 11 13:59:08 MacBookAlu kernel: USB_DISK Media: bad busy count (0,-1)
Nov 11 13:59:08 MacBookAlu kernel: Backtrace 0x53b330 0x53cf13 0x2a06cc 0 0 0 0
Nov 11 14:09:18 MacBookAlu kernel: USBF: 1630.681 [0xd27c800] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x24000000)
Nov 11 14:09:18 MacBookAlu kernel: USBF: 1630.681 [0xd27c800] The IOUSBFamily was not able to enumerate a device.
kernel USB_DISK Media: bad busy count (0,-1)11.11.10 13:56:09
before update to 10.6.5 none problemsMacBook MB Pro, Mac OS X (10.6.5)
Currently Being ModeratedNov 11, 2010 4:58 PM (in response to Racra)Always ask the question was this the Software Update or the Combo update? Some interesting problem are sorted out by going back and installing the Combo update, no harm done in this approach.
Might be worth looking at this old thread as well, and go from there:
hope this solves your problem
Message was edited by: leroydouglasMac OS X (10.6.5), 15" MacBook Pro6,2 - 2.4 GHz Intel Core i5 - 320GB HD - 8GB RAM
Currently Being ModeratedNov 11, 2010 5:42 PM (in response to kd13)This could be a different issue than the OP. If you installed the download software Update I would install the Combo update and see if this sorts out your problem. No harm done.Mac OS X (10.6.5), 15" MacBook Pro6,2 - 2.4 GHz Intel Core i5 - 320GB HD - 8GB RAM
Currently Being ModeratedNov 11, 2010 6:03 PM (in response to Racra)Just for the record, after 10.6.5 all is well here with USB (I used the Software Update approach) with:
1. Sandisk Cruzer 16 GB FAT32 stick (iMac and MBP)
2. Sandisk Cruzer 8 GB FAT32 stick (iMac and MBP)
3. Elgato Eye-TV digital TV receiver, via USB (iMac -- didn't try MBP)
I can read data, watch TV etc.iMac, Macbook Pro, iPhone3G, iPad3G, Mac OS X (10.6.5)
Currently Being ModeratedNov 11, 2010 6:12 PM (in response to radio50)I'll second that! No problems with USB sticks on my machine after the 10.6.5 update.
M.15” MacBook Pro (2.53GHz/4GB/250-7200), Mac OS X (10.6.4), 16GB WiFi iPad, 16GB 2G iPod Touch, 8GB 6G iPod Nano, 160GB iPod Classic
Currently Being ModeratedNov 11, 2010 11:43 PM (in response to Racra)Combo update - Repair Disk Permissions
i tried all, nothing worked
Usb Ports otherwise o.k (with Ipod; Mobiles; Printer)
several Sticks 4GB/8GB no problem
I think the Firmware on the Sticks is the Problem
the Sticks worked since 10.6.3 or 10.6.2 (if i remember right) - not before
it was a Known ProblemMacBook MB Pro, Mac OS X (10.6.5)
Currently Being ModeratedNov 12, 2010 1:13 AM (in response to Racra)I have a likely problem here after updating to 10.6.5 from 10.6.4 our Philips Pocket Memo Dictation Devices are now longer mounted. The Audio part of the devices is shown in Sound prefs like in 10.6.4 and I can use them as in- or output device.
USB Prober shows the device like this:
Full Speed device @ 5 (0xFA233000): ............................................. Composite device: "Digital Pocket Memo 3"
Port Information: 0x0018
Length (and contents): 247
Number of Interfaces: 5
Configuration Value: 1
Attributes: 0x80 (bus-powered)
MaxPower: 100 ma
Interface #0 - Mass Storage/SCSI
Interface #1 - HID
Interface #2 - Audio/Control
Interface #3 - Audio/Streaming
Interface #3 - Audio/Streaming (#1)
Interface #4 - Audio/Streaming
Interface #4 - Audio/Streaming (#1)
but the Interface #0 does not work or 10.6.5 does something really wired.Mac Pro, MBP, iMac, Mac OS X (10.6.5)
Currently Being ModeratedNov 14, 2010 8:49 AM (in response to Racra)This is how i found to fix the no USB issue when updating to OSX 10.6.5.
1. download the OSX 10.6.4 combo update.
2. download Pacifist
3. download kext helper b7
4. Open The OSX 10.6.4 combo update with Pacifist
5. drag over the following files to the desktop, AppleUSBAudio.kext, AppleUSBMultitouch.kext, AppleUSBTopCase.kext, IOUSBFamily.kext, IOUSBMassStorageClass.kext, AppleUSBDisplays.kext.
I know you probably dont need all of these, but i downgraded all of these kexts and all seems to work fine.
6. open up Kext Helper b7 and drag all kext into the app, put in your password, all should be good.
hope this works for everyone!! did for me.
happy dayz!!Mac OS X (10.6.5)
Currently Being ModeratedNov 16, 2010 1:10 PM (in response to Racra)I had the same problem with a Medion 3320 GPS (Windows CE 5.0). Since I upgrade to 10.6.5, disk storage doesn't mount when connected with USB to my Mac.
I applied Spenzer fix and now it works fine
ThanksiMac core i5 27", Mac OS X (10.6.5)
Currently Being ModeratedDec 13, 2010 11:44 AM (in response to spenzer)Does anyone know how I can apply this fix to a desktop - without getting into OSX? Unfortunately, the USB works fine until OSX begins booting and then all USBs lose power. There is an error in my bootlog that points to a problem with IOUSBFamily
Ideas?Mac Intel Core Duo