Currently Being ModeratedNov 15, 2010 5:50 PM (in response to Hervé S.)I have no experience with Ralink drivers on OS X 10.6 Snow Leopard, so I don't know if this helps for you, but maybe you can also use an older version of the USBWirelessUtility to control your driver.
This was the solution for my situation (iBook with a PPC G3, OS X 10.4 Tiger). Ralink didn't compile the WirelessUtility any more for a G3 processor, but the installer worked fine and also the driver could still be used with a G3. I'm now using the Tiger version of USBWirelessUtility 220.127.116.11 with the Tiger version of driver 18.104.22.168. USBWirelessUtility 22.214.171.124 is pre Snow Leopard, but maybe it's worth a try.
See my to long howto: http://discussions.apple.com/message.jspa?messageID=12591377#12591377MacBookPro4,1, Mac OS X (10.6.5), iBook G3 Tiger, iBook G4 Leopard
Currently Being ModeratedNov 16, 2010 12:47 AM (in response to Hervé S.)I now have experience with OS X 10.6 and my Sitecom WL-329 with a Ralink RT2870 chip. I can't reproduce your problem however, so perhaps the problem is solved in the new driver. I used version 126.96.36.199 of the Ralink driver, which was released 10/29/2010, this in combination with OS X 10.6.5. The driver is for RT2870 /RT2770 /RT307X /RT2070 /RT3572 chips according to the Ralink website.
Since both driver and OS are more recently released than your post, I'd suggest to uninstall your previous driver and download and install the newest version. And update to OS X 10.6.5 if you haven't yet.
I could successfully setup a network connection to a hidden WEP protected network with version 188.8.131.52 of Ralink Wireless Utility without having to use a Guest account. (I could even do this with the USB Wireless Utility version 184.108.40.206 I mentioned in my previous post. Version 220.127.116.11 doesn't have the WPS tab of its 18.104.22.168 sibling, but I don't use WPS for connecting to my network).
Version 22.214.171.124 of the driver didn't install properly on my system.
In "System Preferences -> Network" I have a new "802.11 n WLAN" interface after inserting the USB stick, you'll have to add it to your services (and don't forget to press "Apply" after adding the interface). After inserting the USB stick, the Ralink Wireless Utility opened automatically. It took a few seconds after I connected to the network profile from the Ralink Wireless Utility for the "802.11 n WLAN" service/interface became connected. The service went in the Network prefpane from "no connection" to "no IP address", back to "no connection", again to "no IP address" and finally became "connected".MacBookPro4,1, Mac OS X (10.6.5), iBook G3 Tiger, iBook G4 Leopard
Currently Being ModeratedDec 28, 2010 3:56 PM (in response to Niels B)I've been going in circles on this same issue for about a year. I have an Alfa AWUS036NH USB card with the Ralink 3070 chipset. Trying to use it to connect a MBP4,1 running OSX 10.5.8. I've tried installing several versions of the ralink USBWirelesUtility software/driver with various results, but never a connection to the internet. Some older versions simply opened the wireless utility, failed to connect, then quit. The newer ones, like the latest 10.29.10 build (utility ver. 126.96.36.199; NIC driver ver. 188.8.131.52) mentioned above, appears to work correctly. The utility opens when I plug in the device. It finds my network, I can enter password for WPA encrypted network, and get a connection.
However, in Network preferences, I get an option for 'USB Ethernet (en2)' not '802.11 n WLAN'. And no matter how I've tried to configure it, I still get no connection to internet. If I set it for manual DHCP and pick an IP address within my routers range, Network preferences will show that I have a connection, just like the WirelessUtility app shows I have a connection. But they're lying to me, I still can't actually connect any apps to the internet.
I'm at my wits end. What am I doing wrong?MacBook Pro, Mac OS X (10.5.8)
Currently Being ModeratedFeb 3, 2011 3:19 PM (in response to Scionara32)When I run the RAlink software on my MacBook (10.6.6), the device's utility opens, I see a long list of networks (all of my neighbors, I guess), and I am connected to one of them... but not MY home network. When I choose my own network and click the "Connect" button, the utility crashes.
I've e-mailed the RAlink people, but anticipate translation problems (English vs Chinese) ... that is if I get any response at all. I will try to be optimistic and hope to be pleasantly surprised.
Idease from this forum more than welcome!~Macbook, Mac OS X (10.6.6)
Currently Being ModeratedFeb 14, 2011 8:42 AM (in response to Darryl Rehr)Hey Darryl,
any news regarding your issue? Any reply from Ralink?
I have the exact same problem, except my network appears in the list of available networks. Otherwise the utility crashes the same way whenever I'm trying to connect to any network, with this exception: Exception Type: EXCBADACCESS (SIGBUS).
I've tried booting with a 32-bits kernel as suggested by Macbookpro32, but it makes no difference.
Currently Being ModeratedFeb 14, 2011 9:06 AM (in response to alexpp)The unit I had was an "Alpha Network" device. I returned it and got the Afterthemac device.
The difference is basically the great support you get with it. "BJ" from Afterthemac spent a good hour on the phone with me diagnosing the difficulties. First, I had an errant setting in my Time Capsule setup (I switched to simple WAP2/Personal from the other option that I had selected (don't remember it exactly). Second, BJ sent me a fresh copy of the 10.6 driver, in case the copy on the included DVD was a "bum copy." After that, the thing worked... although the performance was not as good as should be expected. BJ is sending me a new unit, in case the original has something wrong with its antenna - allegedly "rare" but not out of the question.MacBook 2,1, Mac OS X (10.6.6)
Currently Being ModeratedSep 17, 2013 12:49 AM (in response to Hervé S.)
Hello, you need to manually create a profile for the network first.
Don't use the site survey tab to connect or add a profile to your network. If you do, the program will just crash.
- Under Site survey take note of the SSID, Authentication, and Encyprtion fields for the network you want to connect to.
- Go to the Profile tab and "Add" a new profile.
- Title your profile
- Select the SSID from the drop down list
- Click Authentication and security
- Select Authentication Type
- Select Encryption Type
- Put your network password into WPA Pre-Shared Key (you can right-click in the field to Paste in your password)
- Click OK
- Select you new network under Profile
- Click Activate
You should then get a yellow checkbox with a red background; followed by a green background once connected.
This works for a MacBook Pro running 10.6.8 (Snow Leopard). Using Wireless Utility 184.108.40.206 and NIC Driver 220.127.116.11. I have a Newer Technologies nMaxPower with RA chips. I downloaded the drivers from here: http://www.newertech.com/downloads/maxpower_usb_n.dmg
Hope this helps people. Let me know if it worked for you.