Currently Being ModeratedApr 6, 2011 4:51 AM (in response to CoryCripita)I'm mainly just concerned with figuring out why this happened AGAIN, and how to avoid it happening a third time. Any help really would be appreciated. Thank you very much.MacBook, Mac OS X (10.5.5), Intel x3100 Graphics Card
Currently Being ModeratedApr 6, 2011 2:03 PM (in response to CoryCripita)
Currently Being ModeratedApr 7, 2011 10:38 AM (in response to CoryCripita)Is it stuck at the blank gray screen, or the gray Apple logo?
You should not have to reinstall to fix this. Have you tried resetting the PRAM? I have seen that fix this a number of times on multiple machines. To do so:
1. Turn off your machine
2. Turn it on and hold down Option + Command + P + R until you hear the boot chime 3 times
3. Release the keys and let the machine boot
Another thing you could try if this doesn't work is a Safe Boot. Hold down the Shift key while booting your machine - this will automatically perform a directory check and could fix some corruption that may be causing the issue.
If that doesn't work, try booting to your install disc and using Disk Utility to verify/repair the disk.
Also, when you are doing these steps, be patient and let the machine sit for a while. When I first updated my MacBook Pro from 10.6.6 to 10.6.7, I had to let it sit for about 15 - 20 minutes after it restarted before it brought me back to the login screen.
Do you have ideas as to what might have caused this problem the first time? It is hard to give you preventative steps without knowing the full story about what originally may have caused the problem.
Message was edited by: mberardinelliApple Certified Macintosh Technician, Mac OS X (10.6.7), MacBook Pro 2.4GHz Core 2 Duo, iPhone 3GS
Currently Being ModeratedMar 4, 2012 9:21 AM (in response to mberardinelli)
I have tried all these things and it keeps going to the grey screen. It started with a kernel screen problem, can't remember the name of the problem off the top of my head. I have noticed that I have to turn it off completely now everytime I close the screen otherwise this happens. I have been able to get it to come back before by removing the battery and restarting the machine in safe mode. Yesterday night, I shut it down and must have closed the screen just before it shut down completely. Now it is just going back to the grey screen. HELP!
Currently Being ModeratedMar 4, 2012 9:47 AM (in response to daisyjanie)
Mac OS X v10.4–10.6
Mac OS X v10.7
Currently Being ModeratedMar 4, 2012 9:55 AM (in response to daisyjanie)
Well if you do have to reinstall from the archive stop doing the Software Updates. More then likely it is the 10.7.3 update you are doiing and then has caused a lot of problems with older MBPs. So just Don't Do It. You don't have to update your system. That is completely up to you. Even if you run Software Update you can Pick and Choose which updates to do. Don't do the Lion 10.7.3 update, Uncheck it. And in System Preferences open Software Update and Uncheck "Check for updates". That way it won't do it automatically.
Currently Being ModeratedMay 25, 2012 8:32 PM (in response to mberardinelli)
I was just trying to load starcraft 2 and my Macbook Por went into the grey loading screen. From there I powered off by holding down power button.
Everytime I try to start my macbook pro I get the grey screen is this because me hard drive is fried or is it some virus.
I have tried to to hold option,command,p,r and waited for it to chime three times but nothing just keeps resetting itself back to the grey screen, and I have also tried holding Shift to get the safe mode and it doesnt work. Is there any other suggestions, I am professional DJ and didnt back up my hard drive within the last week.
Currently Being ModeratedMay 26, 2012 4:46 AM (in response to CoryCripita)
i am having the same problem. first it started run real slow, chrome would crash every second as would itunes. it turned it off and restarted it today and now i get the white screen of death. i tried disk repair utility with the boot disk but it won't work. i have never dropped it or spilt anything on it so i don't understand why is this happenening. also, it's a late 2010 MBP
Currently Being ModeratedSep 23, 2012 6:24 AM (in response to CoryCripita)
Was this resolved??
I have this issue with late 2010 iMac.
Having talked to Apple Care, I was instructed booted in safe mode, reset PRAM, repaired disk/disk permissions and when none of the above helped I did a clean install of mountain lion.
Are all of you running 10.7?
My iMac will never boot first time, maybe second, sometimes it takes 5+ tries before login screen appears, otherwise just the darn grey screen!
Currently Being ModeratedSep 23, 2012 7:22 AM (in response to mcabe)
This is a old thread and the people are long gone.
Start yourself a new thread stating your problem in more detail, this way points can be awarded and email notifications work.
Because there are so many new threads here, yours will fall off the page.
Currently Being ModeratedApr 5, 2013 5:11 AM (in response to CoryCripita)
How do i do a clean install of mountain lion?
Currently Being ModeratedApr 5, 2013 5:17 AM (in response to Josearios92)
Please Start your own NEW Thread.
How do i do a clean install of mountain lion?