Currently Being ModeratedMar 15, 2011 4:08 PM (in response to CBrentL)Bought Belkin Tunebase FM LIVE 2 months ago in an Apple Store, was working well with iPhone 4, until updated to iOS 4.3... Now it seems that "This accessory is not made to work with iphone"...iPhone 4, iOS 4, Belkin Tunebase FM LIVE
Currently Being ModeratedMar 15, 2011 4:18 PM (in response to sebaslange)It seems that nothing is made to last with Apple and they usually stop supporting third party manufactures very quickly. My advice....get an Android phone and save your money.iPhone 3GS, iOS 4
Currently Being ModeratedMar 17, 2011 8:06 AM (in response to another_alias)As of the 4.3 update, the iPhone 4 now works. No fiddling was required. I still get the "unsupported accessory" message, but I did right from the beginning. All the functions that the car stereo supports work correctly.iPhone 3G, iPhone 4, iOS 4
Currently Being ModeratedMar 29, 2011 1:35 PM (in response to another_alias)after upgrading my Iphone 3gs and Iphone 4 to i0s 4.3 my volvo car stereo and iphones are now working fine as it was before the iso 4.2.1 upgrade. now i'm attempting to install ios 4.3.1. hope this upgrade doesn't break it again.iOS 4, windows/mac
Currently Being ModeratedMar 31, 2011 10:08 AM (in response to biggjerry)I am having the same problem with my 2011 Lancer GTS and my 4th Gen iPod touch. I do not see why Apple can not fix this like they did for Volvo on the last update. Maybe they are just working their way down to us. It is dissapointing to me that you pay this much for a device, and then you are at the whim of the parent company as to when they plan to fix a problem that they created. It is poor customer service.
Currently Being ModeratedApr 19, 2011 11:08 AM (in response to biggjerry)
PROBLEM IPHONE 3gs VERSION os 4.3.2 - ARKAMYS (in Renault Scenic) SOLVED !
On the following link from Renault you'll find an update of the firmware of Arkamys and also installation instructions. Version 2.12 is replaced by version 2.30. It works now fine again. After a long time it's possible again to connect my iphone to the Arkamys by using the usb-connection and to display/scroll through artist, albums, playlists, etc.
http://translate.googleusercontent.com/translate_c?hl=nl&langpair=de%7Cnl&rurl=t ranslate.google.nl&u=http://www.renault.co.uk/ownerservices/multimedia/audio-mul ti-functional-tunepoint-update.aspx&usg=ALkJrhi9P5CtYQugJMtqlZ8IjiBVZB0W7A
Good luck everyone with the update and enjoy your music again.
Currently Being ModeratedJun 18, 2011 12:28 AM (in response to lampjewortel)
I notice there have been no posts to this thread in a couple of months. Does this mean that Apple's latest 4.3.x release has fixed the problem, nobody is having car stereo issues any more, and it's safe for me to finally upgrade from 4.0.1 to 4.3.x?
Currently Being ModeratedJun 21, 2011 8:44 AM (in response to biggjerry)
I bought a used 2009 Honda Civic Hybrid. I plugged my iPhone 4 (up to date firmware) into the USB connection, and it said the device was not supported. That I can handle, as I can just use a 3.5mm cable and the AUX jack instead. However, now my phone restarts regularly, including during calls, during syncs, during just about any activity on it. I restored the phone and now it can't even make it through an initial sync before restarting. Any ideas?
Currently Being ModeratedJun 22, 2011 9:02 AM (in response to skyh)
I am on 4.3.2 and am still getting this issue. I have a 2009 Peugeot 207 and get the following error 'usb peripheral error.'
Currently Being ModeratedJun 22, 2011 9:19 AM (in response to Clubber2011)
Ok, 5 mins after posting this, it seemed to work..
What i did
With your phone not connected yet
Turn on ignition
Turn off phone completley.
Plug in usb then wait until iphone loads up again - if it doesnt, press the button at top to switch it on...
Then it should work
I have been struggling for months with this, and once i tried this once it seemed to work
Hope this helps someone
Currently Being ModeratedJun 22, 2011 6:14 PM (in response to Clubber2011)
With iOS 5 on the horizon, I wonder how many likely have cold feet about shelling out for that new Pioneer App Radio. Knowing how Apple operates, you could enjoy it for about 3 months before Apple changes something during the release of iOS 5 and breaks the functionality.
Currently Being ModeratedJun 23, 2011 6:55 PM (in response to freestyla)
I just upgraded to 4.2.8 and had a popping noise through my alpine head unit when running my iPhone 4 through the USB port. I turned the phone off and reset the deck by pushing the small red reset button behind the removable faceplate.......problem fixed. Not sure why however I did shut the phone off normally but when I turned it back on I held the top power button and the bottom round button for 10 seconds as instructed on alpine's website and it worked. Hope this helps!
Currently Being ModeratedJul 6, 2011 3:38 PM (in response to Jsis)
THANK YOU Jsis!!!
I had the same problem with my mex-bt3800u head unit.
I simply restored the phone and backed it up from latest file.
When it went to sync i cancelled the sync.
Then i unchecked sync apps and only synced the music.
I waited for this to finish then synced the apps aferwards and its all back to normal.
This worked on my 3g which wasnt workin originally and my new 4 both running 0s4.1 n latest baseband.
I see no reason why it wouldn't work for you too ( may help vidoe playback aswel, but i dont use that)
My only guess is something to do with the way it writes the file as normally itunes does apps then music. Who knows.. But this fixed it.
MY PIONEER AVIC Z120BT WOULDN'T EVEN RECOGNIZE MY IPHONE 4 (OS 4.3.3) !!! NOW IT IS WORKING FIIINE!!!!
P.S. YOUR ABSOLUTELY RIGHT! YOU HAVE TO REMOVE ALL APPS... COPY MUSIC AND VIDEOS FIRST AND FINALLY THE APPS!!
Currently Being ModeratedFeb 21, 2012 5:56 AM (in response to hexonxonx)
How does any software company ensure seamless integration??? You have a standard API. I better you Apple has an API which the car manufacturers integrated with and some developer changed it.
I am very disappointed with my new iPod Touch (Version 5.0.1) and it's integration with my 2011 BMW 128i. Every time I selected a playlist to be played, my iPod goes to shuffle mode (which indicates not "on" in the car which matches my iPod). To my iPod from shuffling, I have to enable "RND" in my BMW. When I disconnect my iPod, it indicated it was in shuffle.
My iPod "Classic" did not have any problem. So, I put the fault with Apple. If you are going to have a product that intefaces with others, you have to maintain the same API and its core functionality does not change.
I am very disappointed!!!!! Back to the "Classic", Apple say good bye to ~ $300 in revenue.
Currently Being ModeratedFeb 21, 2012 9:32 AM (in response to Adrian Montgomery)
A) This is the iPhone forum. Discussions of your iPod are irrelevent.
B) This thread had been dead for 7 months.