Skip navigation

SMB access from windows

2675 Views 12 Replies Latest reply: Jul 2, 2013 8:42 PM by oshelef RSS
HandySam8800 Calculating status...
Currently Being Moderated
Aug 7, 2011 3:01 PM

Hello,

 

I clean installed Lion on my MBP 2010 and Mac Mini Server 2010. I also installed Lion Server on the Mac Mini. I have the Server configured to share my drives like it was with SL Server. I made the same users and usergroup in Server.app.

 

I can access everything just fine over AFP with the MBP. But I have a problem with Windows 7. When I search for computers in the network it sees the server but when I double click it, it takes a while to load but eventually I get an error message saying that I have no access and that I should check the network path. I don't get a message box asking for credentials.

 

But when I type this directly in the adress bar: \\192.168.0.1xx (IP adress server Mac in local network) I get a message box asking for credentials. I'm perfectly able to access everything as it should this way. But why can't I access the server using it's name? If i type \\SERVER (name for Mac server) I get the same error message. I tried SMB sharing with the MacBook Pro with the same result. I tested this on 3 different Windows PC's and one was a fresh install of Windows 7 but they all gave the same result.

 

I really don't know how to make this work normal again. I'm probably not seeing something stupid. I know i can make a connection to a share in windows so that it access the share on boot but I really would like it normal again.

 

Kind regards

Mac mini, Mac OS X (10.7), 2010 Server model, Lion Server
  • D0GG Level 3 Level 3 (935 points)
    Currently Being Moderated
    Aug 7, 2011 3:59 PM (in response to HandySam8800)

    Here is a very easy workaround...

     

    1. Right-click on the desktop of your Win 7 box
    2. Choose New->Shortcut
    3. Enter the IP address for your Mac (if it asks for the user/pass just enter them and check the box to save your credentials)
    4. Save it

     

    Now whenever you want to connect to your Mac and it's shares from your Win 7 box, just double click the shortcut and you are in.

  • EgyptOfPrince Level 1 Level 1 (0 points)
    Currently Being Moderated
    Aug 12, 2011 11:25 AM (in response to HandySam8800)

    I am also having the same problem described by HandySam8800 - I can access the share just fine, but the backup utility cannot.

  • giovanniIMC Calculating status...
    Currently Being Moderated
    Aug 22, 2011 11:47 PM (in response to HandySam8800)

    Hi,

    (my English is not good so excuse my if I will not clear), I have the same problem, I cannot see the "root" tree of shared folders (with 10.6 server and 10.7.0 version it worked well). I looked the smb.conf file but I did not find documentation about it (in Lion OSX), do someone know how to change main parameters of smb.conf in an apple like way ? (I can try to change manually but I'm afraid that this can increase my problems). I ask to apple service support but they said me that it's not thier problem but windows (and linux) problem... today the little company where I work is sopped due ti this problem.

  • jordivic Calculating status...
    Currently Being Moderated
    Feb 17, 2012 3:27 AM (in response to HandySam8800)

    I have the same problem

  • Simon Falcon Level 1 Level 1 (55 points)
    Currently Being Moderated
    Jul 8, 2012 5:05 PM (in response to HandySam8800)

    I also am trying to backup my lonely windows 7 machine.  The backup fails after looking like it's going..  Part way through it ditches with the error access denied.  I've tried to create a new share from within the server admin, I've tried to chmod the directory to 777 to no avail

  • Simon Falcon Level 1 Level 1 (55 points)
    Currently Being Moderated
    Jul 11, 2012 5:57 AM (in response to HandySam8800)

    I've been doing some more trouble shooting at this - I have not made progress but thought I'd at least share what I've tried:

     

    I am using Lion Server 10.7.4 and I am able to share folders with the Windows 7 desktop without an issue - it's only the windows 7 backup that seems to have a problem with using the lion network share as a destination.

     

    I thought it might be the version of SAMBA so I tried to replace the SMBX with smbup as another thread had suggested.  With Lion server I wasn't able to get it to share anything at all and once I removed it (using their uninstall tool), my netbios name would no longer broadcast.  I coudn't figure out how to reverse the problem so I re-loaded the OS from scratch and started over

     

    I also read in another thread that some folks who had issues signing in had to use the domain of their server in the username line so I thought I'd give that a try as well.  The domain name is shown in the advanced tab of your network control panel under netbios name and the format to use simply DOMAIN\username - it's important to note you don't need a pair of slashes before you put your domain name as you would normally use in the server address field.  Mapping network drives with the username written with the domain preceding works but so does just your username.  I tried it within the windows 7 backup and it still gives an error on the first attempt then goes through on the second and ultimately the backup fails.

     

    Any other ideas?

  • Simon Falcon Level 1 Level 1 (55 points)
    Currently Being Moderated
    Jul 16, 2012 5:09 PM (in response to Simon Falcon)

    On my new install of lion server I tried samba3 and didn't make much progress - followed the directions found on johnlarge's blog and when I tried to start the service I got no error or feedback but smbd didn't start even though the nmbd was running. I then started over following the directions I found on macoxhints (with a fresh install of lion and server 10.7.4) but got the same results - the smbd wouldn't start.

     

    I decided to try smbup again and this time on a clean install of 10.7.4 server it works (not for the admin user of the box but for any user added).  The netbios name of my server is OFFICESRV and that's what I used in both the Name and Description settings of SMBUp.  I also changed the ports to 139 and 445 in the advanced server config setting and managed to setup scan to network on my xerox 6180mfp.

     

    My windows 7 box can see and mount shares but I'm still getting backup errors to the network share - now it says "access denied" after looking like it's been copying for a bit.  I can for sure read and write to the destination folder from the windows desktop so I'm not sure why it's still crapping out.

  • JMartinP Calculating status...
    Currently Being Moderated
    Sep 6, 2012 3:23 AM (in response to HandySam8800)

    I have encountered both issues addressed in this thread.

     

    I managed to solve the first problem (where Windows 7 machines were unable to mount SMB shares) using Alex Narvneys' solution found in this forum.

     

    The second issue (where the Windows 7 backup utility fails to access the Lion server) remains. The backup utility starts preparing files but stops with error code 0x80070005 (Access is denied). Did anyone manage to solve this so far?

  • oshelef Level 1 Level 1 (0 points)
    Currently Being Moderated
    Jul 2, 2013 8:42 PM (in response to JMartinP)

    I'm having the same problem with windows 7 backup to a Lion windows share. Any resolution/solutions/work arounds?

Actions

More Like This

  • Retrieving data ...

Bookmarked By (3)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.