Skip navigation

upgrade from tiger to leopard on a power mac G?

7089 Views 3 Replies Latest reply: Oct 12, 2011 5:49 PM by Texas Mac Man RSS
jrgalang Calculating status...
Currently Being Moderated
Oct 12, 2011 11:01 AM

can i upgrade from tiger to leopard on a power mac G5?

PowerMac, Mac OS X (10.4.11)
  • Kappy Level 10 Level 10 (221,035 points)
    Currently Being Moderated
    Oct 12, 2011 11:04 AM (in response to jrgalang)

    Yes, if it has an 867 MHz or faster processor:

     

    Leopard System requirements

     

    You must have a Macintosh computer with:

     

    • an Intel processor or a PowerPC G4 (867 MHz or faster) or G5 processor
    • a DVD drive >built-in FireWire
    • at least 512 MB of RAM (additional RAM is recommended for development purposes)
    • a built-in display or a display connected to an Apple-supplied video card supported by your computer
    • at least 9 GB of disk space available, or 12 GB of disk space if you install the developer tools
  • a brody Level 9 Level 9 (62,045 points)
    Currently Being Moderated
    Oct 12, 2011 11:11 AM (in response to jrgalang)

    Yes, however, read about the pitfalls below.

     

    Mac OS X 10.5 was release October 26, 2007.  Its 10.5.8 update is the newest operating system available for PowerPC Macs that meet its requirements.  It is available occasionally by calling Apple online store's phone number, even though the website does not show it.  Many want to upgrade to Leopard because of i-Devices (iPhone, iPad, iPod) bought saying iTunes 10 or later is recommended.  To check if that really is required, look at the i-Device requirements section of this tip

     

    If your Mac is Intel, and running 10.4.11 or earlier, and meets the hardware requirements of 10.6, a less expensive upgrade solution is to upgrade to 10.6 directly.  No need to upgrade to 10.5 unless your software won't run in 10.6.

     

    Software listed for Intel Mac and PowerPC Macs can run on 10.5 for the platform indicated in the link. For Leopard you need

     

    867 Mhz on a single processor or faster (1 Ghz and higher are faster).

     

    256 MB of RAM (preferably 512MB of more based on arbitrary experience).

     

    9 GB of hard disk space (arbitrary experience adds another 15%) free.

     

    Macs newer than August 28, 2009 can't run Leopard, and require a minimum of Snow Leopard.

     

    Dual booting Mac OS 9 and Mac OS X 10.5, check this tip:https://discussions.apple.com/docs/DOC-1757

    Classic is not compatible with 10.5.  10.4.11 on a PowerPC Mac or earlier is needed for Classic.

     

    Mac OS X 10.5 is the earliest version of Mac OS X that will run iTunes 10.  This is necessary for numerous i-Devices (iPad, iPhone, and iPods).  To find out which require it, see this article

     

    http://en.wikipedia.org/wiki/ITunes_version_history

    Should you require only iTunes 9, and are running a minimum of 10.4, backup your data at least twice, check in Apple menu -> About This Mac if you have a G3, G4, G5 (which is PowerPC), or Intel Core (which is Intel) make sure you are running 10.4.11 PowerPC or 10.4.11 Intel (depending on the aforementioned processors), and download iTunes 9.2.1.  The only reason you should upgrade to 10.5 is if some other software is required.

     

    Boot Camp is only available on Intel Macs with 10.5 and higher.

     

    Time Machine backup software first appeared in 10.5

     

    You have several options of installation which are explained here: https://discussions.apple.com/docs/DOC-2209

     

    All of which I recommend you backup your data at least twice before upgrading, and have sufficient disk space to install, and all your third party applications and drivers are known to be Leopard compatible, and after backing up your data you dismount and disconnect all but Apple keyboard and mouse and if there is an external display, that too. And just before you install repair permissions.

     

    If any of the above terms confuse you, ask on the Discussions board what they mean, and one of the people who knows will gladly assist you.

     

    You must use the installer disc that looks like /___sbsstatic___/migration-images/163/16332040-1.jpg *, and does not say Upgrade, Dropin, or OEM, if you choose to upgrade to Leopard.

    #

     

    Message was edited by: a brody

    10.7.1 iMac 5,1 MacBook Pro 3,1, Mac OS X (10.7.1), - * Links to my pages may give me compensation.
  • Texas Mac Man Level 8 Level 8 (44,245 points)
    Currently Being Moderated
    Oct 12, 2011 5:49 PM (in response to jrgalang)

    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).

     

    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:

     

    MB427Z/A  Leopard 10.5.1 install DVD

    MB576Z/A  Leopard 10.5.4 install DVD

    MB021Z/A  Leopard 10.5.6 install DVD (single user)

    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)

     

    Installing Mac OS X 10.5 Leopard

    http://support.apple.com/kb/HT1544

     

    Mac OS X 10.5 Leopard Installation and Setup Guide

    http://manuals.info.apple.com/en/leopard_install-setup.pdf

     

    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

     

     Cheers, Tom

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.