Currently Being ModeratedDec 28, 2011 1:01 PM (in response to Rune Jensen)
Please further describe the macbook you are using. Size, hardware, sata port the SSD is on. What does the system profiler say the established SATA connection is? Such as SATA II/III, link speed, and established speed?
Also, what firmware are you using on the SSD? Have you enabled any SSD support such as TRIM, etc?
Also, you said you installed Lion via another MBP and inserted it into yours. Could you explain the other system and how it handled the SSD?
P.S. SSD's are really finicky in the MBP and take some configuration adjustments to get working. This is due to Apple playing around with their SATA controller voltages to increase battery life.
Currently Being ModeratedDec 28, 2011 1:07 PM (in response to Rune Jensen)
Also, a few forums have help with this issue. Here is one that may help. Make sure you format the drive before installing. A good idea if you can do it, connect via the included USB cable to a windows machine and Secure Erase the drive first. Then check that all firmware is up to date. Then do a clean in stall of OSX Lion with it in the MBP Port 0..
Currently Being ModeratedDec 28, 2011 1:10 PM (in response to Rune Jensen)
Currently Being ModeratedDec 28, 2011 1:13 PM (in response to CMCSK)
Man forget about the manufacturer. They will only have you contact Apple and Apple will have you contact them. Please list what I mentioned earlier. Cannot help you without the information. Many people have been able to get the 830 working in a lot of different Macbooks. It's a great drive due to its in house design, where Samsung created all the parts and logic boards themselves. This gives way to great firmware.
Please post all related system information. I'm telling you, without that no one can help.
Currently Being ModeratedDec 28, 2011 2:00 PM (in response to Rune Jensen)
I feel your pain. I bought a 128GB Samsung 830 Series SSD the week it came out and installed it in my Early 2011 Macbook Pro 13". It worked for about two months. Then, one day Microsoft Word stopped working while I was using it, and my computer crashed. From that point on I was unable to reinstall Mac OS X Lion on that SSD no matter what I did, even though I could install Windows 7 on it with no problems. So then I contacted Samsung who gave me an RMA number. I recieved the replacement, refurbished SSD in the mail today, and I've now spent 6 hours of my day trying to get it working. I've tried everything from formatting it with different programs to formatting it externally and so on. Nothing seems to work, just like you're describing. This SSD has been the most frustrating electronic product I have ever owned. It makes me feel better now though since I've found someone else with the same problem. My advice: Don't waste your time because it will never work. I'm just going to buy another Intel drive, which I have never experienced a problem with.
Currently Being ModeratedDec 29, 2011 3:58 AM (in response to Expirobo)
Thanks for all the replies.
The MacBook Pro I am trying to install the SSD into, is a 15" medio 2009 model (MacBookPro5,3), with a 2.66 Ghz Intel Core 2 Duo processor, 8 GB of 1333 MHz DDR3 RAM, NVIDIA GeForce 9400M 256 MB, and running Mac OS X Lion 10.7.2.
My SATA interface is an NVidia MCP79 AHCI with support for 3 Gb/s (SATA II). Unfortunatelly, the system profiler is not able to show any info on the SATA connection when the SSD is located in the MacBook. It just keeps spinning the wheel searching for information and never get done. I tried enabling TRIM, but this did not make any difference.
I am not able to find the firmware version on the SSD, maybe someone could give me a hint on how to figure this out?
I have an older MacBook Pro, 15" ultimo 2008 (MacBookPro5,1), with a 2,4 Ghz Intel Core 2 Duo processor, 2 GB 1067 MHz DDR3 RAM, NVidia Geforce 9400M 256 MB, and running Mac OS X Lion 10.7.2. Here the SSD is working just fine with the following information shown in the system profiler:
NVidia MCP79 AHCI:
Produkt: MCP79 AHCI
Link-hastighed: 3 Gigabit
Forhandlet Link-hastighed: 3 Gigabit
Beskrivelse: AHCI Version 1.20 Supported
SAMSUNG SSD 830 Series:
Kapacitet: 256,06 GB (256.060.514.304 byte)
Model: SAMSUNG SSD 830 Series
NCQ (Native Command Queuing): Ja
Antal kommandoer i kø: 32
Udskiftelige medier: Nej
Udskifteligt drev: Nej
Medium type: Fast hukommelse
Type partitionsoversigt: GPT (GUID-partitionstabel)
Kapacitet: 209,7 MB (209.715.200 byte)
Kapacitet: 255,2 GB (255.200.755.712 byte)
Tilgængelig: 9,96 GB (9.955.590.144 byte)
Ikke skrivebeskyttet: Ja
Arkivsystem: Journaled HFS+
Currently Being ModeratedDec 29, 2011 10:22 AM (in response to Rune Jensen)
Try this. If possible, swap out the sata cables between the two Macbooks. Some of the SATA cables aren't shielded properly from Apple and caused intereference issues. With the SSD being slightly noisy (high frequency noise) and high throughput on the SATA interface, swapping cables with the other Macbook could isolate the issue. If this fixes the problem, iFixit has a replacement cable for a few dollars that is heavily shielded. I'm not sure the compatibility but it's worth a shot.
I think you're having interference and are losing communication with the SATA bus intermittently. Good luck and let us know if it works.
Currently Being ModeratedDec 29, 2011 10:30 AM (in response to Expirobo)
Some have reported adding aluminum foil around the SATA cable shields it. I don't believe this as metal, including aluminum, is actually really good at increasing RF signals. BUT, some people have said it works. Check MacRumors and other sites for help. It won't hurt to try it so long as you make absolutely sure you don't let it touch the logic board or and metal contacts on it.
Currently Being ModeratedJun 19, 2012 3:18 AM (in response to Rune Jensen)
I have a MacBook Pro, mid-2011,8,1.
I had a Crucial SSD M4, 512 Go that today seems to be dead IO/Error, not recognized anywhere, so I bought a new SSD.
I just got a Samsung SSD 830, 256Gb, (7PC256) and it is not recognize as internal disk on my MBP.
I tried :
- as external drive of the macbook pro : worked
- as internal on two computers (sata 2 & sata 3) : worked
- as external computer disk (usb 2) : worked
- boot from internal harddisk with MacOSX Lion and try to detect SSD as external worked.
- boot from external disk with MacOSX Lion and try to detect internal SSD : failed
The SSD seems to worked everywhere, but not as internal of my MBP 8.1, with SSD as internal disk, tried too :
- reset PRAM/NVRAM : failed
- change RAM (from 8Gb to 4Gb (Kingston, 1333Mhz)) : failed
- boot from Ubuntu : failed
The disk is not recognized = not seen in system profiler, not seen in fdisk (Ubuntu); not seen in diskutil, not seen in boot device chooser (option key pressed during boot).
The problem is : the SSD worked, so the vendor do not want to echange it, and the MBP worked with others SSD and HDD, and Apple cannot supply maintenance for third party SSD.
What should I do ?
Currently Being ModeratedJun 19, 2012 3:42 AM (in response to fikoko)
From the hype that I've read on Amazon about the Samsung 830, even Mac users (2011 models) love it. I have a Crucial m4 512GB that I love, too. The problem might be using the drives in older notebooks, even though they might be SATA as well.
Here's what I did to get mine up and running:
1. Downloaded the "Install Mac OS X Lion.app" from the App Store.
2. Used Lion DiskMaker to make a bootable USB flash drive.
3. Installed the SSD.
4. Booted from the flash drive to erase the drive and create one partition, HFS+ Journaled.
5. Rebooted and installed Lion.
6. Rebooted from flash drive again and did a Time Machine restore onto the SSD.
7. Booted from the SSD and had no trouble with it.
Some people recommend Carbon Copy Cloner and some SuperDuper. And some get a transfer kit. I just used this method and it worked perfectly.
BTW - I'm an 8,2 (late 2011) but I see no reason that this method wouldn't work on an 8,1 (early 2011) as well.
Currently Being ModeratedJun 19, 2012 4:28 AM (in response to clintonfrombirmingham)
Thank you, your fast reply :
Here is what failed :
1. Downloaded the "Install Mac OS X Lion.app" from the App Store : OK, write is very fast
2. Used Lion DiskMaker to make a bootable USB flash drive : OK, Recovery partition created
3. Installed the SSD : The SSD replace the original harddisk
4. Booted from the flash drive to erase the drive and create one partition, HFS+ Journaled : NO, only Internet Recovery is available
5. Rebooted and installed Lion : NO, no disk detected
Currently Being ModeratedJun 19, 2012 4:38 AM (in response to fikoko)
Maybe I should have made myself clearer - you need to download Lion DiskMaker and have the "Install Mac OS X Lion.app" on your hard drive so that it can create a bootable USB flash drive (4GB minimum but anything larger will do as well) or burn a bootable DVD (either one but flash will be faster).
Using your 'new' flash drive or DVD boot to same.
Format SSD using Disk Utility (one of four options that will be displayed).
Reboot to USB flash drive (or DVD). Install Lion. Very fast. Your Recovery partition will be installed.
Reboot to flash drive again. Use Time Machine to restore drive.
Everything should work at that point. Just let the SSD boot and put the flash drive aside for emergencies.
Currently Being ModeratedJun 19, 2012 6:42 AM (in response to clintonfrombirmingham)
When I boot to USB key, SSD is not visible while it is install inside, even if OSX is installed on it.
Currently Being ModeratedJun 19, 2012 2:22 PM (in response to fikoko)
I finally sold the SSD to someony who needed for his computer, and buy a tested SSD on place : OCZ Vertex 4, 256Go which did not work until firmware update (1.3 to 22.214.171.124).
After that the SSD work perfectly.
So, **I think** (i'm not sure !) there is a problem on latest Samsung 830's SSD firmware.