Skip navigation

Move to Aperture with Photoshop edited images?

1384 Views 15 Replies Latest reply: Feb 7, 2012 4:50 AM by CroMagnum RSS
1 2 Previous Next
CroMagnum Level 1 Level 1 (10 points)
Currently Being Moderated
Jan 30, 2012 5:26 AM

There was just a new thread which asked about iPhoto edited images being moved to Aperture. Didn't want to be accused of hijacking a thread by asking an elaboration in that thread, so here's a new one.

 

A further question that thread brings up:

 

I too have edited images. (Very few are in iPhoto).

I do have way too many edited images that have little clones, in various states of edit & possibly recropped in Photoshop, as well. Saved as various resolutions of *.png or *.jpg or *.psd. It appears daunting to move all those in a coherent way.

 

Is there a way to handle a move to Aperture that reduces the pain of such a messy state?

Mac OS X (10.6.8)
  • léonie Level 8 Level 8 (46,460 points)
    Currently Being Moderated
    Jan 30, 2012 5:37 AM (in response to CroMagnum)

    When you decide to let Aperture manage your images, then you usually do not need to keep your images in various resolutions inside the Aperture Library.

    • You import the image file with the best possible resolution you may possibly want into Aperture as master image file.
    • When you need different encodings and sizes outside Aperture you export the image and generate the other image format using a custom export preset. Aperture handles that quite nicely, and you do not need to clutter up your disk space by trying to keep track of many image files in different formats.

     

    Regards

    Léonie

  • Kirby Krieger Level 6 Level 6 (11,565 points)
    Currently Being Moderated
    Jan 30, 2012 8:25 AM (in response to CroMagnum)

    CroMagnum wrote:

    Is there a way to handle a move to Aperture that reduces the pain of such a messy state?

    Léonie's lesson is _very_ important: Aperture is a software workshop for

    - storing and organizing digital camera negatives, and

      - developing and publishing pictures derived from those digital camera negatives.

     

    You prepare pictures to be published, but you don't publish them until needed, and you don't save the published pictures in Aperture.  (A significant part of Aperture's efficiency derives from computing things as needed and _not_ saving data that can be re-computed.  Understanding this is, imho, the key to making the most of Aperture.)

     

    You are moving from one paradigm -- file management -- to another -- image management (as practiced with Aperture).  As with any paradigm shift, there is no frictionless translation from one practice to the other.  In other words: there may be ways to reduce the pain of the change, but there is no certifiably "good" way to convert you existing data stores from what you have to what Aperture will provide.

     

    My working suggestion ("working" as in: a first draft) is to save _all_ of your digital negatives, and only the highest resolution copy of each of your edited files.  Separate these into those you want to have regular access to, and those you can archive.  Import those that you want to regularly access, in such a way that you can find what you're looking for.  Don't try to make it perfect:  the effort to completely tidy the "messy state" is almost surely not worth the time.  Better to devote that time to crafting an Aperture workflow that will not leave your data in a "messy state" at any point during the years you use Aperture.

  • Kirby Krieger Level 6 Level 6 (11,565 points)
    Currently Being Moderated
    Jan 30, 2012 8:28 AM (in response to Kirby Krieger)

    PS to CroMagnum:  Starting a new thread is the proper way to add questions that diverge from an existing discussion.  Thanks for being considerate.  (I haven't read the other thread, but from you description this is clearly worth a dedicated thread started by you.)

  • Frank Caggiano Level 7 Level 7 (22,770 points)
    Currently Being Moderated
    Jan 30, 2012 6:07 PM (in response to CroMagnum)

    Unfortunately if you have multiple edits of a single image outside of Aperture there is no way to combine those as a single master and versions. Each image file will be its own master in Aperture with no connection (unless you make one) to any of the others.

     

    There are some organizational thins Aperture could do for you. You could keyword all the images in one 'thread' so that you could gather them all up once in Aperture. You could place them in their own project so that they would be together. You could stack them. You get the point.

     

    There are many ways Aperture can make it less painful but no way to totally eliminate the pain.

  • léonie Level 8 Level 8 (46,460 points)
    Currently Being Moderated
    Jan 31, 2012 4:42 AM (in response to CroMagnum)

    In Aperture you have two different flavors of organizing structures:

    • Containers (projects and folders): In the projects you store your images, and the folders help to group them hierarchically for easy access, see Kirby Krieger's essay: Re: Organizing in Aperture, concise long version:
    • Output structures: Album, smart albums, slide shows, books, webpages, ...: The output structure does not actually store the images, but references them for specific uses and describes relations between images, bases on properties of the images, like keywords, captions, and other tags.

     

    What you need to do, when designing your own library structure, is to clearly seperate the aspects - storage and use:

    • The storage structure should be simple, but consistant - I am a follower of Kirby's maxime: "one shoot - one project" - just like in the old times of rolls of film - one box per film roll. As to the allocation of folders to contain your projects, there are different approaches; you may go for a chronological scheme How do you structure you library? or group by categories, anything is fine, as long as it isn't to involved, straight forward, and easy to maintain.
    • The output structure should be flexible; you will find that you will frequently adapt it to the project at hand. Since the ouput structure heavily relies on the tags and keywords, you should invest some effort into define import presets, to get most of your tagging done automatically on import.

     

    Thus said, back to the problem at hand:

    Looking: If I use "Stacks," I can group/clump them together. That's a pretty good use for stacks, especially if judiciously assembled into a project container.

    I recommend against using stacks for long-term structuring. Stacks are somewhat weird, transient creatures between storage and output structures: they don't fit completely into one of the above categories. They are used by Aperture as storage stucture on import, but their use is restricted - you cannot move single  images contained in a stack to another project (all images in the stack will move together), and special rules apply if you use stacked images in books and slide shows. Also you will need stacks for other uses, and you will want to be able to stack your images according to other criteria. It easy to unstack all images by mistake - happens to me all the time - then your storage structure will be broken.

     

    I suggest to group related images by filename on import - using a custom import preset for filenames. That way your structure will be persistent not as fragile as when based on stacks.

     

    Regards

    Léonie

  • léonie Level 8 Level 8 (46,460 points)
    Currently Being Moderated
    Feb 2, 2012 2:36 AM (in response to CroMagnum)

    One shoot, One Project is interesting, but isn't that a lot like iPhoto's treatment of events?

    The problem there (iPhoto), being that not every event is a fistful of ROLLS of film, or even one whole one.

    Some things in iPhoto are just good - most of all the metaphor used to name the items in the library.

    Aperture's name for "projects" is ill chosen and very misleading - the common use of the word  "project" suggest an output item, not an input item, I fondly remember a recent discussion I had with Kirby Krieger on the naming of projects.

     

    Projects -  as containers of images - really should be small, putting all images needed for a particular output into one single project may needlessly make Aperture slow. To bundle the several "rolls of film", group them using folders. A hierachy of nested folders is very useful to group items and to browse items, that are related.

     

    This drops me into the on-going quandry of not having an ideal way to organize multiple variations of the same or similar original image.

    I repeat my suggestion- give them similar names. You can search by filename or version name.

     

    Aperture is very good at organizing multiple variations of the same or similar original image - versions are built in as a main feature of Aperture. But you have to let Aperture create and manage the versions. Your main problem right now is that you are already confronted with a mess of many versions - forgive me for saying so -and want to continue this by importing all the versions into Aperture.  I strongly suggest you think about Kirby's advice Re: Move to Aperture with Photoshop edited images? - start with a well designed library by only importing the best version with the highest resolution and let Aperture create all the variations you need - then you can set Aperture to auto stack new versions, and if you accidentally unstack them, no problem - the versions will be related and easily identified.

     

     

    Cheers

    Léonie

     

    P.S. No, I do not know how to search for stacked items. I found no criteria to do it either in Aperture's search rules not in the AppleScript Dictionary. Perhaps the other forum members have a solution.

  • SierraDragon Level 4 Level 4 (2,665 points)
    Currently Being Moderated
    Feb 2, 2012 1:34 PM (in response to CroMagnum)

    CroMagnum wrote:

    This drops me into the on-going quandry of not having an ideal way to organize multiple variations of the same or similar original image.

     

    Is there a criteria that works well to identify items stacked, to reassemble them into that organization later?

     

    No quandry using an images database, very easy.

     

    • One way is to use keywords, an essential database concept.

     

    Just take your batch of similar images, pick a representative one, and keyword the whole batch to the file name of the arbitrary representative image. Then at any time you can search on that keyword and see all those images; takes about 2 seconds. Or if the group of images is important enough it could have a named keyword, like Jones_wed_kiss.

     

    Personally I try to keep transitory keywords in their own grouping, as opposed to global forever keywords like "flower," "dog," "family," "wed," "bride," etc.

     

    Note that keywords apply globally across all images in the Library that they have been applied to.

     

    • A second way is to create an Album. Albums are just collections of pointers to images that exist in one or more Projects. Because they  just consist of pointers, albums take up almost no space and can be created or deleted at will with zero impact on the images they point to. Like keywords, albums are a very useful tool.

     

    Note that either albums or keywords can also be used to help organize the image files that come into Aperture from your pre-existing Photoshop image folders.

     

    HTH

     

    -Allen

     

    P.S.

    I think it makes a world of sense to start thinking about structure before using the app. Good for you. The move from film-think to database-think is not necessarily intuitive and it does take some time.

  • Frank Caggiano Level 7 Level 7 (22,770 points)
    Currently Being Moderated
    Feb 2, 2012 3:08 PM (in response to CroMagnum)

    Why not just put all the external versions of a particular image in one project? All the projects that contain these multiple master images could go into a folder.

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.