Skip navigation

How to remove the chapter prefix?

1304 Views 14 Replies Latest reply: Feb 20, 2012 11:09 AM by MULTIREFLEX RSS
limtc Calculating status...
Currently Being Moderated
Feb 7, 2012 6:51 PM

How to remove the word "chapter" from TOC? In this case, I would prefer 21 rather than chapter 21.

 

chapter.png

iBooks Author, Mac OS X (10.7.2)
  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 5:45 AM (in response to limtc)

    Numbers Only Diagram.jpg

     

    Note: My illustrations use Section, but this works the same at the Chapter level.

    1. Open the first Chapter or Section.

    2. Highlight the Words Chapter or Section by double-clicking on them.

    3. A small pop-up appears.

    4. Select “Number Only” from the lower choice.

    5. Click inside your page. The pop-up disappears and you are left with the number only.

    6. Repeat for each Chapter. Select “Current Chapter” if working with Sections.

     

    I think this should solve your issue. - Fabe

  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 5:55 AM (in response to limtc)

    I knocked my brains out on ToC yesterday. I think many other people have too.

    You are telling me the words "Chapter" & "Section" appear in the ToC no matter how you label them in the document, right? Grrrr....

     

    The popular saying in research funding is to end every paper with, "More research needs to be done." Same here. Let's all send feedback to Apple about the ToC as it is and as authors wish it to be.

     

    - Fabe

  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 6:05 AM (in response to limtc)

    I was just looking again at a section of a book. It appears that the ToC reflects the name typed in, not the Section 1 heading. If so, do as I suggested AND make sure the names do not contain "Chapter" or "Section." I'll test it too in a few minutes.  - Fabe

  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 6:25 AM (in response to limtc)

    Okay – Here's what I developed into a Table of Contents from scratch using the Basic (Botany) Template.

     

    ToC Test.png

     

    The file froze up on me, not allowing name changes. I clicked around to different things, changed orientation, etc, and shortly I was able to change "Untitled" to whatever I wanted.  So, I think the elimination of the words "Chapter" and "Section" is possible in the ToC.  - Fabe

  • Barnheisel Level 2 Level 2 (240 points)
    Currently Being Moderated
    Feb 8, 2012 6:54 AM (in response to limtc)

    Not sure if this helps, Seems to be alot of ways to mess with the TOC.

    and things change depending on Landscape vs Portrait

     

    On the chpater page you can remove the Prefix but it still shows on TOC page

    number only.jpg

     

     

    I could be wrong, but I don't think you can have only the number appear and not the word "chapter"on the TOC (landscape)

    to remove both just drag off the page.

     

     

    Also the word "chapter" shows on the black pop up title bar when you tap the screen.

    if you use Preface instead of Chapter it only shows the Title in the black bar and on the TOC page

     

    So using Preface instead of Chapter may work for what you need.

  • no time flat Level 1 Level 1 (10 points)
    Currently Being Moderated
    Feb 8, 2012 7:16 AM (in response to Barnheisel)

    Thank you Barheisel! This also appears to work for adding appendices at the end of a book, which should not be labeled as "chapters."

  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 7:26 AM (in response to limtc)

    ToC 2.jpg

    Moving between Portrait and Landscape mode creates some mind twisters for me. But I am getting more comfortable.

     

    Yesterday, I used "Preface" in place of "Chapter" and found it indented the same as "Section." More investigating to do.

     

    No Time Flat, can you show an example of this? Like everyone, I have Pre and Post book parts which need to be placed correctly in the ToC. Thanks.

     

    - Fabe

  • no time flat Level 1 Level 1 (10 points)
    Currently Being Moderated
    Feb 8, 2012 8:26 AM (in response to Fabe)

    What I found was that the word, say, "Appendix A" would align with the word "Beginning" (the title of your Chapter 1) in your example and also align with parts in the front matter, such as "Preface." That is, the chapter numbers would be offset. That is exactly what I personally would like to have happen. Were the appendix to be an appendix to a chapter, I would place it as a section because it should be within the Chapter tag. Just me. 

  • no time flat Level 1 Level 1 (10 points)
    Currently Being Moderated
    Feb 8, 2012 8:45 AM (in response to Fabe)

    Of course, the question then becomes, if one places an appendix as a chapter appendix using Section, how does one get rid of the pesky section numbers?

  • Fabe Level 3 Level 3 (620 points)
    Currently Being Moderated
    Feb 8, 2012 8:49 AM (in response to no time flat)

    If the Appendix refers to a Section, title it as "Heading 1" and it will appear indented from that Section (like Sub-Part 1 above.)  - Fabe

     

    "In this digital world, everything is pesky." - Dylan

  • MULTIREFLEX Calculating status...
    Currently Being Moderated
    Feb 20, 2012 11:09 AM (in response to limtc)

    Hi there,

    I am having similar problems but I found a solution to have my prefix changed.

    I am using iBooksA in spanish and all default prefix come like Capítulo, Sección etc...

    But I need them in English and change Sección by Advice

    Just by clicking in the title of the Disposiciones (Layout¿) panel, you type what you want.

    Then it appears correctly in the TOC

    here is my image to make it clearer maybe

    Captura de pantalla 2012-02-20 a la(s) 20.04.19.png

     

    Here another example with "What I want" instead of "Chapter"

    Look at the TOC, it says "What I want 3" because it is chapter 3

     

    Captura de pantalla 2012-02-20 a la(s) 20.06.30.png

    Thank you for all the written before, it helps a lot!

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.