Currently Being ModeratedFeb 29, 2012 2:26 AM (in response to KeScoBo)
Not recognized as far as how? Have you looked in the Device Manager and see if it's listed?
You may have to go into the Sound control panel and select what you want to use. It may be a generic listing or a "named" listing of your headphone.
You might try a search as there are a few like you with the same problems, there are different fix's for different issues.
Currently Being ModeratedMar 1, 2012 8:54 AM (in response to Jaygyver)
Thanks for the response. I have looked in the Device manager - it says that I have a cirrus driver installed and that it should be working. I dug around in the sound settings, updated the drivers and tried a few different types of headphones as well as external speakers - no dice.
I also browsed these forums and a couple of other sites extensively and didn't find any answers - it seems there used to be a problem of overheating when plugging in headphones, but nothing like what I'm experiencing - the jack just seems to be dead when I boot in windows.
Currently Being ModeratedMar 1, 2012 8:55 AM (in response to The hatter)
Thanks for the response. According to the device manager, I have a cirrus driver installed (and the device manager says it's working...). Still, no sound through the headphones, and it doesn't even seem to recognize when headphones are plugged in.
Currently Being ModeratedMar 30, 2012 6:16 PM (in response to KeScoBo)
Similar issue with a MacBook Pro late 2010, using Bootcamp 3.3, in Windows 7 all updates current as of 2012-Mar-30.
In MacOSX 10.6.8 Snow Leopard the MBP's combo (single) headset jack recognizes the iPhone combined headphone and microphone, in Windows 7 only the headphone works.
It is annoying as the internal mic picks up too much ambient noise including keyboard. Skype for example shows the headset option among three AudioOut to choose from, for mic's there is only one option (the internal Cirrus Logic CS4206A (AB13)), no headset mic.
In Windows Device Manager, (or under Control Panel, Manage Audio Devices, Recording, shows only the default internal mic, with driver version 6.6001.1.26, 8/16/2010 (this was installed with Bootcamp 3.1.3 and 3.2 updates, no further updates to this driver in 3.3).
So this is what I tried:
- Installed the latest driver from http://www.cirrus.com/en/products/cs4207.html
- Device manager, driver, update, picked the inf file and it selected the driver for my hardware which seems to be CS4206A (AB13). Driver version is now 6.6001.1.30, 12/15/2010.
- Unfortunately, sorry : no change, still the combo jack only recognizes the headphone, not the microphone. Bummer.
- I tested again, headset mic still works under OSX, but not under Windows7.
Currently Being ModeratedDec 10, 2013 8:33 PM (in response to KeScoBo)
I have found a nice remedy to this problem after having bootcamp for so long.. ^_^
What you do is go to the playback devices panel, like you have in the image,
and just set the headphones to the default device.
Now, what this does is enable the headphones to output sound from the machine,
but if you unplug it, it will simply go back to your speakers.
Lemme know if it works out for you!
Currently Being ModeratedFeb 28, 2014 7:19 AM (in response to Emperial67)
Worked for me! Thank you! Here's exactly what I did:
- Went to Start Menu
- Searched Playback
- Under Control Panel in the search results I selected "Find and Fix Audio Playback Problems"
- Followed my prompts and was sure to select Headphones when I got to that point. Then ran troublshooting on the headphones and it fixed the problem for me!