dmkellman
Level 1 (0 points)

Q: Lion Not Booting Up, disk0s2: I/O error

Turned on my MBP with Lion installed.  I get the apple loading screen with the little spinning icon... and that's it.  turned it off, turned it back on, went off to take care of something, 10 minutes came back... still apple icon with spinning icon below it.  Turned it off.  Rebooted in Verbos mode.  disk0s2: I/O error keeps repeating.  I do some research and there's suggestions of backing up and reformatting.  Up rises another issue, I cannot boot into recovery mode to access disk utility I turn on the laptop and hold Command + R and I just keep getting the grey apple screen.  Any suggestions?

MacBook Pro, Mac OS X (10.7.1)

Posted on Sep 15, 2011 8:38 AM

Close
dmkellman

Q: Lion Not Booting Up, disk0s2: I/O error

  • All replies
  • Helpful answers

  • by Allan Eckert,

    Allan Eckert Allan Eckert Sep 15, 2011 8:40 AM in response to dmkellman
    Level 9 (53,621 points)
    Desktops
    Sep 15, 2011 8:40 AM in response to dmkellman

    Sounds like it is time to call in the heavy guns and take it to Apple for repair.

     

    Allan

  • by DrLikes,

    DrLikes DrLikes Mar 18, 2012 3:06 PM in response to dmkellman
    Level 1 (0 points)
    Mar 18, 2012 3:06 PM in response to dmkellman

    Hey, did you ever get this problem resolved? I am having the EXACT same problem right now. Please reply! Thanks.

  • by Grant Bennet-Alder,

    Grant Bennet-Alder Grant Bennet-Alder Mar 18, 2012 3:09 PM in response to DrLikes
    Level 9 (60,931 points)
    Desktops
    Mar 18, 2012 3:09 PM in response to DrLikes

    I/O Error is usually caused by Bad Blocks. Your drive may be dying.

     

    Sometimes, you can revive a drive and buy yourself some time by Zeroing the drive (this erases all data).

     

    Regardless. a new drive and an external enclosure are in your future.

  • by dmkellman,

    dmkellman dmkellman Mar 18, 2012 3:35 PM in response to DrLikes
    Level 1 (0 points)
    Mar 18, 2012 3:35 PM in response to DrLikes

    I ended up resolving it by replacing the hard drive.  Not the solution you're looking for, I'm sure.  I hope you have a backup.

  • by Samurai2k,

    Samurai2k Samurai2k May 10, 2013 7:08 AM in response to dmkellman
    Level 1 (0 points)
    May 10, 2013 7:08 AM in response to dmkellman

    My iMac starts up slow and often stops working during the day after these errors.  I run the Disk Utility frequently and it never finds any errors, but it is only a bandaid. How do I fix the issue ?

     

     

    My iMac

     

    24-inch, Early 2008

     

    Processor  3.06 GHz Intel Core 2 Duo

    Memory  4 GB 800 MHz DDR2 SDRAM

    I can not add anymore physical ram

     

    Graphics  NVIDIA GeForce 8800 GS 512 MB

    Software  OS X 10.8.3 (12D78)

  • by Grant Bennet-Alder,

    Grant Bennet-Alder Grant Bennet-Alder May 10, 2013 8:53 AM in response to Samurai2k
    Level 9 (60,931 points)
    Desktops
    May 10, 2013 8:53 AM in response to Samurai2k

    1) The quick fix is to replace the drive, which is what almost any technician will do because it always works and provides rapid resolution.

     

    2) Once you have some time, you MAY be able to revive the drive by erasing with Security Options, Zero all data (one pass). But this removes all data, and you need somewhere to park an additional Backup, so option 1 has more appeal as the first step.

     

    Disk Utility only checks Directory Integrity, it does not read ANY non-Directory blocks. A more accurate command would be ( Repair Directory) rather than ( Repair Disk). If the Bad Blocks are not in the Directory, Disk Utility will not find them, but SMART Status sometimes does.