Skip navigation

Can't log in, screen goes black after trying.

730 Views 3 Replies Latest reply: Mar 20, 2012 4:46 PM by iCare RSS
HKKID92 Calculating status...
Currently Being Moderated
Mar 20, 2012 3:42 PM

So when I try to log in, the screen goes black, after a few seconds, when I move the mouse around, press a few keys on the keyboard, the login screen comes back. But the same thing happens when i try to log in, it just keeps going black. What should I do? I did have the Time Machine in place, but if there is a simple fix for this issue, that would be great.

 

I appreciate any help you can lend me. Thank you.

iMac
  • iCare Level 4 Level 4 (1,705 points)
    Currently Being Moderated
    Mar 20, 2012 3:53 PM (in response to HKKID92)

    In order to rule out most software issues try booting into Safe Mode by holding down the shift key immediately after you hear the startup tone when you power up the system. For more info see the following articles.

     

    http://support.apple.com/kb/HT1455

    http://support.apple.com/kb/HT1564

     

    If the issue goes away when you boot into Safe Mode then it indicates you may have an extra or corrupted piece of software that is not behaving well.

     

    Can you provide more information about the model of iMac that you are using and the version of OS X that is installed? Did you install any new software or utilities around the time that the issue began that might provide us with some clues?

  • iCare Level 4 Level 4 (1,705 points)
    Currently Being Moderated
    Mar 20, 2012 4:46 PM (in response to HKKID92)

    Interesting...

     

    By any chance did you or someone else ever set up an EFI firmware password on this system? It could explain why your system won't boot from the optical drive when the Install DVD is inserted since many of those snag key features are disabled when the EFI firmware password is enabled. It would most commonly be used in a school environment. Here's more information on the firmware password:

     

    http://support.apple.com/kb/HT1352

     

    If you have an EFI firmware password and can't remember it you'll need to reset it before continuing. A quick Google search will turn up methods for performing a reset.

     

    If you don't have an EFI password set try this. Instead of holding down the 'C' key, hold down the option key instead to load the system picker. Make sure the Install DVD is in the optical drive. Does the Install DVD appear as one of the boot options? It may take a minute for it to appear once the hard drive icon appears. If the Install DVD never shows up, and you don't hear the optical drive making any noise then you may have an optical drive problem too.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.