6 Replies Latest reply: Apr 14, 2012 1:17 PM by Dstevens72
Dstevens72 Level 1 Level 1 (0 points)

Can't get rid of blue screen at start up


eMac (2005), Mac OS X (10.4.11), Not sure if 2004 or 2005?
  • 1. Re: how to safe start
    Kappy Level 10 Level 10 (226,775 points)

    Did you mean booting into Safe Mode ?

  • 2. Re: how to safe start
    Dstevens72 Level 1 Level 1 (0 points)

    Yes. Sorry wasn't sure of proper terminology.  Wife was working on the old emac and screen froze up.  She didn't know to force a quit and instead turned off the machine.  when she went to start it back up, just getting a blue screen.  Someone told me about trying to start up in safe mode.

  • 3. Re: how to safe start
    BDAqua Level 10 Level 10 (116,475 points)

    "Try Disk Utility

     

    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.

    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)

    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.

    3. Click the First Aid tab.

    4. Select your Mac OS X volume.

    5. Click Repair. Disk Utility checks and repairs the disk."

     

    http://docs.info.apple.com/article.html?artnum=106214

     

    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.

     

    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • 4. Re: how to safe start
    Kappy Level 10 Level 10 (226,775 points)

    I think instead you need to do this:

     

    Repair the Hard Drive and Permissions

     

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.

     

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.


    If this doesn't fix things then you are going to have to reinstall OS X which you can do as follows:

     

    How to Perform an Archive and Install

     

    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.

     

    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.

     

    Repairing the Hard Drive and Permissions

     

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.

    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.

    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.

    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.

    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • 5. Re: how to safe start
    Dstevens72 Level 1 Level 1 (0 points)

    Thanks. 

  • 6. Re: how to safe start
    Dstevens72 Level 1 Level 1 (0 points)

    Thanks.