Skip navigation

Please help: Can't record more than 1 second in Garageband 11

2999 Views 20 Replies Latest reply: Jan 29, 2013 8:13 PM by Cosme422 RSS
1 2 Previous Next
Jeff_Jeffty_Jeff Calculating status...
Currently Being Moderated
Apr 21, 2012 8:37 AM

Hi everyone,

 

This is my first post!  I'm getting desperate as I can't find any answers elsewhere online and Applecare were no use as they don't help with software issues apparently!

 

Basically I've used older versions of Garageband for years with no issues, but after upgrading to Garageband '11 (I've got the latest version 6.0.5 (428.5)), I can no longer record any guitar!  It will record for a split second, then stop, leaving only a split second of recorded track.   If I try again, I get another split second of recording (this time coloured red) and a warning telling me:

 

Part of the project was not played

This project has too many tracks, effects, or notes to be played in real time.

To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.

 

This is crazy as I'm using a brand new iMac 10.6.8 (Snow Leopard) 2.7Ghz Intel Core i5 with 4 GB 1333 MHz DDR3 system and I'm only trying to record 1 track!!!

 

So it clearly can't be because I've got too many tracks - this is the first one!

 

I've gone to the Optomizing GarageBand Help page and found that I'm already doing everything it suggests (no other Apps open, 500GB free space on the hard drive etc).

 

I've run out of ideas.  This is really frustrating because older versions worked perfectly on far slower Macs with much less memory!

 

Please help me if you know how to fix this.

 

Thanks everyone,.

GarageBand (Mac) '11, Mac OS X (10.6.8)
  • léonie Level 8 Level 8 (46,355 points)

    This looks like some application has a bad memory leak. Do you get the same error message after restarting your system?

     

    Are there any warning messages/ diagnostic messages in Console window?

     

    And what do you see in the Process Monitor - llok for cpu usage and memory usage.

     

    Both "Console" and "Process Monitor" can be launched from Applications -> Utilities.

     

    You may also check, if GarageBand works properly, if you start it from a different user account, to see if some settings in your account may be faulty.

     

    Regards

    Léonie

  • léonie Level 8 Level 8 (46,355 points)

    couldn't find any Process Monitor

    That was a typo - sorry ; I meant "Activity Monitor" (in Applications -> Utilities)

     

    a repeated message relating to a TascamUS122 audio

    This looks like something in your current preferences is referring to the audio interface, but this is not installed in your current GB version. Have you tried, if GarageBand works from a different account? Then we would know, if your User settings in your account refer to this interface or if this is system wide.

     

    Regards

    Léonie

  • oz-macnut Level 1 Level 1 (35 points)

    Try refreshing your preferences for Garageband (GB).

     

    Quit GB.

    Go to: ~/Library/Preferences/

    Move these files to the desktop - This keeps a quick backup of them. Garageband will re-create these prefs when you re-launch Garageband.

    com.apple.garageband.cs

    com.apple.garageband.LSSharedFileList.plist

    com.apple.garageband.plist

     

    Re-launch GB.

    You might have to reset some of your preferences in GB.

     

    You will have to do this in every user account.

     

    If something unwanted happens, just replace your prefs listed above with your desktop copies.

    If it solves your issue, then you can delete the prefs that you dragged to the desktop, othewise, you can place them back, replacing what was recreated.

     

    Have you tried uninstalling your Tascam software? Is there an uninstaller available? Sounds like there is a driver conflict...

     

    Check what your Audio MIDI Setup is doing also (in Applications/Utilities). Make sure you "input" in the same sampling format (e.g. 44.1 KHz, 16 bit) as what GB is doing. GB's preferences say the choice of "Better" is recording at 24 bit, but exporting at 16 bit. Differences in sampling rates between what the mac hardware/GB might be stopping you.

    Try the same preferences move to desktop trick (as above) on Audio MIDI Setup's "com.apple.audio.AudioMIDISetup.plist" (in ~/Library/Preferences also).

    -oz

  • oz-macnut Level 1 Level 1 (35 points)

    Suggest looking for an update to the emagic midi driver.

     

    Failing all that, make sure you have at least one valid backup of your system, two backups to be safe, then try reinstalling snow leopard from the installer DVD.

    https://discussions.apple.com/thread/2362057?start=0&tstart=0

    Then install GarageBand, jam packs, other extras, then replace your files from backup. Very important...

     

    If you have time, you could just try reinstalling SL without erasing the hard drive first, but it might be better to start from scratch. It's a lot of work, but it might make your headache go away for good!

     

    Still, try finding that emagic driver first.

     

    -oz

  • oz-macnut Level 1 Level 1 (35 points)

    Interesting.

    The should be nothing technically different between the MacBook pro and the iMac. Are you using the same interface? I.e. USB on both MacBook and iMac? Make sure you are obtaining the latest driver for your Session driver from the web too.

     

    What about installing a fresh install of snow leopard onto an external drive, install GarageBand and all your jam packs etc, and see if you can get the issue to present itself there. You should be able to boot using your external drive. Best if it is a FireWire enclosure. Perhaps leave your session I/o driver out of that installation.

     

    Perhaps another post of your system log might help again.

     

    What is your recording interface make and model? How does it connect? USB or FireWire?

     

    Sorry mark. Not being very helpful, am I?

     

    -oz

  • oz-macnut Level 1 Level 1 (35 points)

    Happy to try and assist Mark.

    I understand your reluctance to do the whole re-install. I have found in the past, sometimes it takes less itme in the long run.

     

    Interesting that good old Audacity works OK. So it must be indeed GB that's giving you the issue.

     

    Lets check this next:

     

    Go the the Finder and launch System Preferences.

    Go to the Audio pref pane and look at the Input and Output sections there. Again, I don't have an interface connected, but...

    Is your Native Instruments Session audio interface listed and definately highlighted in both the input and output sections/tabs?

    SystemPref-Input.png

     

     

    Now launch GB and go to your preferences (⌘-, (Command-comma))

    Under Audio/MIDI, do you see your Native Instruments Session audio interface listed there under both Audio input and Audio output? This pic below was taken on my MacBook Pro (which I don't actively use for audio recording myself) so that's why I have System Setting listed there.

    If you change it, it will probably tell you that GB must change the audio driver, click Yes.

    GB Audio.png

    Go across to Advanced. Does your Audio Resolution say "Good"?

    Start with that and if sucessful we can try and go higher to say "Better" or "Best", if you want to record at a better audio resolution.

    GB Advanced.png

    My Console shows this when I launch GB:

    com.apple.midiserver[33460]: PreSonus FireStudio MIDI Driver - 3.5.6.11675 - x86_64 - Aug 16 2011 05:08:04

    It shows the MIDI driver loading (where yours reports un-supported architecture and a 32-bit driver). The previous entries in your log indicate that the 64-bit MIDI is being loaded. (x86_64), but the driver is still 32-bit). I still think that perhaps an updated driver for the Native Instruments needs to be found... Audacity wouldn't care, as it does not support MIDI, but GB does, and would need to load both before being able to record sucessfully.

     

    I'll see what I can find out for you Mark.

     

    Hold tight!

  • oz-macnut Level 1 Level 1 (35 points)

    Mark

     

    If you are using a USB input, make sure you are plugging into one of the USB ports on the back of the iMac, not a keyboard/hub etc.

     

    Check the driver version for your Native Instruments Session I/O. You should be able to check the version number from System Profiler (Applications>Utilities), then click the interface your Session I/O is connected by (USB or Firewire), select your device and see what driver version is listed in the RHS panel's info. I would say it would be 2.4.xx (if your interface isn't that old.)

     

    You might need to un-install all Native Instruments drivers etc first though using the "Mac OS X Uninstaller Utility 1.1.0"

    http://co.native-instruments.com/index.php?id=freeupdates#Utilities

     

     

    Then install the driver "Guitar Rig Session IO Driver 2.4.23 - Mac"

    http://co.native-instruments.com/index.php?id=freeupdates#Guitar_Rig_Session_IO

     

    regards

     

    - Oz

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.