Skip navigation

Little help?!

847 Views 15 Replies Latest reply: May 30, 2012 5:12 AM by WZZZ RSS
1 2 Previous Next
Jwatson123 Calculating status...
Currently Being Moderated
May 29, 2012 4:17 AM

I have just got an old 2004 G5 and thrown a brand new hard drive in it. When i tried to install leopard (which i'm told would be the best operating system to use) it comes up with a blank blue screen! Help?!

  • Mike Sombrio Level 6 Level 6 (9,090 points)
    Currently Being Moderated
    May 29, 2012 4:20 AM (in response to Jwatson123)

    Did you format the hard drive using Disk Utility on the install disc?

  • WZZZ Level 6 Level 6 (11,880 points)
    Currently Being Moderated
    May 29, 2012 4:49 AM (in response to Jwatson123)

    Was it working before you installed the new drive?

  • Mike Sombrio Level 6 Level 6 (9,090 points)
    Currently Being Moderated
    May 29, 2012 5:02 AM (in response to Jwatson123)

    What color is the install disc you're  using, grey or black? If it's grey that's a machine specific disc and needs to be for that machine, black discs are retail discs and should work.

  • Mike Sombrio Level 6 Level 6 (9,090 points)
    Currently Being Moderated
    May 29, 2012 5:13 AM (in response to Jwatson123)

    May e they sent you a disc for a Power Mac G5 instead of an iMac G5. There was only one model of iMac G5 in 2006.

  • Mike Sombrio Level 6 Level 6 (9,090 points)
    Currently Being Moderated
    May 29, 2012 5:28 AM (in response to Jwatson123)
  • WZZZ Level 6 Level 6 (11,880 points)
    Currently Being Moderated
    May 29, 2012 5:43 AM (in response to Jwatson123)

    If you gave Apple the serial # of the computer, they would have sent the install DVD (or CD) for whatever OS the Mac originally shipped with in 2004. Probably Panther 10.3. But it should be the right disc.

     

    Why do you think it's Leopard? Leopard wasn't around in 2004. Did you order Leopard from them? If you did -- and I'm not sure it's even available from Apple Phone Sales any longer -- it wouldn't have been the grey, machine specific disc.

     

    You may need to go back and check the connections to the drive. Or it might be a failed SATA controller to the drive. It might not have been working when they disposed of it. Any way to find out?

  • rccharles Level 5 Level 5 (5,150 points)
    Currently Being Moderated
    May 29, 2012 11:17 AM (in response to Jwatson123)

    Try holding down the option key then power on. This brings up the startup manager. Click on your dvd. Click on right arrow key.

     

    At least, this will give  an indication that you machine is alive.

     

     

    For more information

    http://docs.info.apple.com/article.html?artnum=106178

     

    Sometimes if volume doesn't boot in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:

     

    reset-nvram

    set-defaults

    reset-all

     

    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."

    http://support.apple.com/kb/TS1812?viewlocale=en_US

  • -Rotten Apple- Level 1 Level 1 (45 points)
    Currently Being Moderated
    May 30, 2012 12:37 AM (in response to Jwatson123)

    It should turn off if you hold the power button pressed for couple seconds. It works that way on most computer devices regardless if there is software installed or not.

     

    Folks here did already mention resetting the PRAM but you could try to reset power management, to do that power off the machine and then press power button to turn on the machine but don't let go, keep the button pressed until the sleep led blink and you hear loud beep.

     

    If you really have first generation iMac G5 (made in 2004) these machines are notorius of their capacitors going bad so whenever there is stange problem you should check the caps. Bad capacitors can cause all kinds of issues ranging from slight instability to completedly dead machine.

     

    You could also try different memory stick combinations if possible.

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.