larry meucci

Q: After upgrading to lion, cant select HDMI sound setting

Don't know why I upgraded to lion on my Mac Mini, but I did, (lion is bad news, my opinion)

everything worked fine before the install, I could select which sound output  I wanted to use, HDMI or headphones, (in sound settings).

That was before, this is now with lion.

both devices show up in the "select an out put device" box,Just like before, however when I select HDMI it will not remain there. it goes back to headphones.

I would appreciate, if you comment on this thread, that you don't add stuff that you think might work, or that you have the same problem.

Please only the solution.

Mac mini (Mid 2010), Mac OS X (10.7.3)

Posted on Feb 29, 2012 2:57 AM

Close

Q: After upgrading to lion, cant select HDMI sound setting

  • All replies
  • Helpful answers

  • by larry meucci,Solvedanswer

    larry meucci larry meucci Feb 29, 2012 3:25 AM in response to larry meucci
    Level 1 (4 points)
    Feb 29, 2012 3:25 AM in response to larry meucci

     

     

    I've now recieved a reply from one of the Senior Technical Advisors at AppleCare who was kind enough to follow up with engineering.

     

    Apparently this change was intentional in 10.7.2 to bring the behaviour of the headphone jack in line with the experience of users who have external displays connected via Thunderbolt !

     

    See this support note; http://support.apple.com/kb/TS4113

     

    I've replied to this advice by pointing out that this change actually removes functionality that was present in 10.7.0 / 10.7.1 and requested that the issue is esculated back to engineering for further comment..

     

    I'll post again when I recieve the next reply.

  • by m1r3k,

    m1r3k m1r3k Apr 29, 2012 11:37 AM in response to larry meucci
    Level 1 (10 points)
    Apr 29, 2012 11:37 AM in response to larry meucci

    Actually, I have Apple Thunderbolt display with Mac Mini. And I share the same issue with you. I cannot switch to the display speakers when the haedphones are plugged in the socket. As the Thunderbolt display does not  have audio output, I cannot see any meaning in this functionality. Now, whenever I want to swtich from my headphones to the display audio, I have to unplug the headphones from the socket. It would be much easier to switch via the software. I do not understand the logic behind this. Do you have any more info from the Apple engineering ?

     

    I have found a workaround using the "Audio MIDI setup" utility (standard tool may be found under Launchpad -> Utility). This allows you to define a new device like "Display Audio working" which does almost the same as "Display Audio" would do if it would be possible to switch to it. Unfortunately, the sound volume bar then does not behave as expected - it does not allow you to change the volume, so it is not a full solution. But it works and you do not have to unplug the headphones from the socket then. If you would be interested in some more details, let me know.

  • by duarte118,

    duarte118 duarte118 May 24, 2012 6:13 AM in response to m1r3k
    Level 1 (0 points)
    May 24, 2012 6:13 AM in response to m1r3k

    can you explain to me how did you do it?

  • by Frank Salazar,

    Frank Salazar Frank Salazar Jun 16, 2012 3:12 PM in response to duarte118
    Level 1 (0 points)
    Jun 16, 2012 3:12 PM in response to duarte118

    Thank you m1r3k! That works! I;ve been chasing this all afternoon (thanks for the new feature, apple).

     

    Duarte, once you open theaudio midi setup Utility (in finder click the go contextual menu and select utilities), At the bottm left of the dialog box, there is a "+" sign. click that and "Create Multi-output Device" It will create a new audio device and you can tell it to use the HDMI output. It is then available in Sound Preferences and you can select it even with the analog jack plugged in. Since most people will be feeding HDMI into a device that has a volume control (HDTV, Reciever, etc.) this is a pretty great work around.

  • by m.l.thompson,

    m.l.thompson m.l.thompson Aug 24, 2014 4:54 PM in response to Frank Salazar
    Level 1 (7 points)
    Aug 24, 2014 4:54 PM in response to Frank Salazar

    Frank, I can't thank you enough for your post!!!  I tried all kinds of advice to fix this problem, but yours was the only one that actually helped me get sound back!  Thanks again!!!

  • by Julian Pellico,

    Julian Pellico Julian Pellico Dec 15, 2015 9:59 PM in response to Frank Salazar
    Level 1 (0 points)
    Dec 15, 2015 9:59 PM in response to Frank Salazar

    This guy!!!1! I submitted a radar ticket years ago but they said it worked as designed. I never knew there was Another Way!