Currently Being ModeratedJun 19, 2012 6:04 PM (in response to fikoko)
The SSD doesn't work perfectly.
There is some I/O Errors that make install impossible :'(
I remove one memory stick of both, so I now have 4Go of RAM, and remove and put back SATA cable.
Now it seems tor works, this could work with Samsung 830
Currently Being ModeratedJun 19, 2012 6:35 PM (in response to fikoko)
It's flubbed up somehow, then (the SSD). You should be able to see it in Disk Utilities and be able to format it from there. I'd return it and get another - and start the process all over again.
Currently Being ModeratedJun 19, 2012 6:40 PM (in response to fikoko)
But you shouldn't have to downgrade your memory to install a working SSD. I had 16GB in mine when I upgraded to the Crucial m4 512GB. Not one problem getting it up and running in a very short period of time.
I think some of you are having trouble with the SSDs themselves - I'd return them (and keep returning if needed) until I got one that worked.
Currently Being ModeratedJun 20, 2012 10:05 AM (in response to clintonfrombirmingham)
For the OCZ problem, I have activate TRIM with "TRIM Enabler" and I have no more problems : even with all RAM, no IO errors. I filled SSD with zero data (dd if=/dev/zero of=zero) with no errors.
I hope this will be useful fore someone else.
Currently Being ModeratedJun 20, 2012 11:31 AM (in response to fikoko)
Just to beat a dead horse (seems like you got the OCZ working), it appears that you have some issues around your MBP. I have a mid-2011 13" mbp, OSX Lion, 16 gb DDR3-1333 ram and a Samsung 830 SSD (256gb) all running very harmoniously. I had no problems with the ssd install, however, about 2 months ago I started getting beachballs and complete system lag for several seconds or more. The ssd was only 3 months old. I upgraded to the new Samsung 830 firmware and the problem went away. I have beligerantly pushed the thing to make sure it wont cause problems again and it hasn't.
I have trim off, although I had it on originally. However, even after I reinstalled Lion the beachballs still existed until the firmware upgrade. I really hate to say it, but your MBP may have a Sata 3 shielding problem, causing issues recognizing the ssd's at their intended bandwidth. Although they should be backwards compatible, if the speed negotiation is flipping around, this can cause exactly the issues you are having. Check your system profiler to see if you are at full 6gbs bandwidth.
Also, just to mention it, the new MBP (retina) have the same exact Samsung controller from the 830 in their SSD drives now. So any qwirks with them should be worked out on the next firmware update.
Currently Being ModeratedJun 21, 2012 9:23 AM (in response to Expirobo)
Yeah, I think you're right.
However, here is what is said by system profiler :
Intel 6 Series Chipset
Produit: 6 Series Chipset
Vitesse de la liaison : 6 Gigabits
Vitesse de la liaison négociée : 6 Gigabits
Description : AHCI Version 1.30 Supported
TRIM : No
SMART : Checked
And now works with no IO/Errors even if I shut down computer because of kernel panic.
Note : I removed sata cable of MBP and clean with a air spray.
Currently Being ModeratedJun 21, 2012 9:35 AM (in response to fikoko)
iFixIt.com sells replacement shielded cables for the MBP. I don't condone 3rd party equipment for non user-upgradeable parts, however, with this issue you may look into it. Other than that, I am out of ideas. I have never had a kernel panic with the SSD. When I installed Crucial memory in the MBP, initially I got kernel panics. Then I RMA'd back to NewEgg and got Kingston (my favorite brand of memory) and have had none.
Kernel panics are usually a symptom of clock timing issues, where the bus or memory clocks hang and dont allow the kernel to complete the required processing within the current clock cycle. The hard drive should not cause this unless it hangs during communication without warning, caused by hardware problems on your computer.
Currently Being ModeratedJun 26, 2012 4:00 AM (in response to Rune Jensen)
Finally returned the MBP (mid-2011) for maintenance.
IO errors came back, on the OCZ Vertex 4.
OCZ Agility 3 not recognized (I wanted to try older SSD generation).
As soon I have the MBP back, I will try again try with Samsung 830.
Currently Being ModeratedJul 2, 2012 4:19 PM (in response to fikoko)
Retried an other Samsung 830 256G : failed to be recognized from new installer.
Note : Agility 3 performance really poor if filevault 2 enabled.
Currently Being ModeratedJul 9, 2012 8:46 AM (in response to Rune Jensen)
Have been using the Samsung 830 in a Macbook Pro Late 2008 for about 8 months now without any problem.
NVidia MCP79 AHCI:
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
SAMSUNG SSD 830 Series:
Capacity: 128.04 GB (128,035,676,160 bytes)
Model: SAMSUNG SSD 830 Series
Serial Number: XXXXXXXXXXXXX
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Currently Being ModeratedJul 28, 2012 3:06 PM (in response to Rune Jensen)
I have just bought the samsung 830 series online waiting to be delivered. I still have applecare on my mbp, will their tech support phone help me through any problems I encounter or is that a stupid question because its a third party hardware (although I hear they are using these drives in the new retina model anyway).
Currently Being ModeratedJul 28, 2012 3:12 PM (in response to will_dale_)
is that a stupid question because its a third party hardware (although I hear they are using these drives in the new retina model anyway).
I think you've answered your own question.
in any event, do not expect to get the same issue as others are having....different factors play on why one is having issues while others aren't having any.
good luck.....the 830 seires is a good drive and it's the one being used in the Retina Macbook PRO
Currently Being ModeratedJul 28, 2012 5:06 PM (in response to Bimmer 7 Series)
I had the Samsung 830 and had issue with it (beachballs). I really thought Samsung was the king of SSD's and may very well be, but not for me. So I returned the Samsung 830 to Amazon for a refund. After a little more reasearch I decided on the Crucial M4 series SSD. I've had NO issues at all with the M4 (5 months of use). In fact I like Crucial M4 SSD's so well I purchased (10 days ago) one for my new 2012 MBP 2.6GHz i7, HR antiglare WS (USB 3.0).
One thing I learned about SSD's that I instutited from the get go was to disable "Put Hard Drive to Sleep When Possible" in "System Preferences" "Energy Settings". Others have disabled sudden motion sensor via Terminal but I think my method is better....IMO.
BTW, Im getting 285 write and 502 read, 17.6 second (average) startup in the 2012 MBP. A real screamer, the fastest computer I've ever owned and Im 54. Geekbench score 12096.
P.S. Almost forgot Crucial firmware upgrade is easy using MBP, not sure about Samsung. I upgraded the first M4 firmware from 0309 to 000F (no problems with firmware 0309). My newest M4 came with firmware 000F.
Currently Being ModeratedJul 28, 2012 5:12 PM (in response to Mini-Mac)
I own 2 Crucial M4 SSD - 256GB in my late 2011 Macbook PRO 13 inch and a 512GB in my late 2011 Macbook Pro 15 Inch with no issues either.....
in any event, thread was about Samsung 830 Series...
Currently Being ModeratedJul 29, 2012 6:13 AM (in response to Bimmer 7 Series)
BTW, my 633CSi is the best of the 6 series. In any event, this thread is about the Samsung 830.....sorry you already said that......my bad.