Sweet98 Hero

Q: iMac G5 Startup Problems

I have a iMac G5 and when I turn it on it has like a bunch of lines going accross the screen and some times it will not boot past the apple symbol. Here is my Youtube video of it http://www.youtube.com/watch?v=Hb-BiNcN7kA if you watch it it will give you more of an idea of whats wrong.

iMac, Mac OS X (10.5.8), G5

Posted on Jun 24, 2012 12:44 PM

Close

Q: iMac G5 Startup Problems

  • All replies
  • Helpful answers

  • by Kenichi Watanabe,

    Kenichi Watanabe Kenichi Watanabe Jun 24, 2012 1:49 PM in response to Sweet98 Hero
    Level 8 (39,326 points)
    Mac OS X
    Jun 24, 2012 1:49 PM in response to Sweet98 Hero

    I was not able to see the video link.

     

    However, if you have not already, you should try resetting PRAM

     

    http://support.apple.com/kb/HT1379

     

    and resetting SMU (power management)

     

    http://support.apple.com/kb/HT1767

     

    When you connect the power cord, if you were using a power strip (surge suppressor) or some type, try connecting it directly to the wall outlet, by itself.  Initially power it up with nothing else connected, then add only a standard mouse and keyboard.  Use it that way for a while to see if it is any better.

  • by -Rotten Apple-,

    -Rotten Apple- -Rotten Apple- Jun 24, 2012 2:46 PM in response to Sweet98 Hero
    Level 1 (45 points)
    Jun 24, 2012 2:46 PM in response to Sweet98 Hero

    Graphic chip or more likely its solder gone bad. In some cases it can be bad capacitors too, either on motherboard or power supply. Cannot be fixed with software tricks, in some cases the machine might work just fine if you use it in safe mode or remove graphic chip related kext -files (disable acceleration) but that's not really a fix. In your case it seems worse as you have those artifacts right from the beginning.

     

    If it is graphic chip related then there are two fix methods, either reflow the old solder back or reball it by using solder which contains lead. Of course these require a professional who knows how to do it. In some cases it is really the chip which has gone bad but in most cases the connection between motherboard and the chip is not reliable anymore.

  • by Sweet98 Hero,

    Sweet98 Hero Sweet98 Hero Jun 24, 2012 4:19 PM in response to Sweet98 Hero
    Level 1 (15 points)
    Jun 24, 2012 4:19 PM in response to Sweet98 Hero
  • by Sweet98 Hero,

    Sweet98 Hero Sweet98 Hero Jun 24, 2012 4:20 PM in response to -Rotten Apple-
    Level 1 (15 points)
    Jun 24, 2012 4:20 PM in response to -Rotten Apple-

    I fixed the video watch that and I do not think it is that becuase somtimes it wont boot all the way up like theres a software problem

  • by -Rotten Apple-,

    -Rotten Apple- -Rotten Apple- Jun 24, 2012 5:34 PM in response to Sweet98 Hero
    Level 1 (45 points)
    Jun 24, 2012 5:34 PM in response to Sweet98 Hero

    Well power it up and press shift key to start in safe mode, if you still see those artifacts then you can be sure it is hardware problem. However, like I said, in some cases you might be able to run the computer without acceleration (=safe mode) just fine but as soon as you boot in normal mode (=acceleration on) there will be problems.

     

    You could also try booting from OS X installation disc, if you have those artifacts with it also, then you can rule out all software problems once and for all.

  • by Sweet98 Hero,

    Sweet98 Hero Sweet98 Hero Jul 1, 2012 11:25 AM in response to -Rotten Apple-
    Level 1 (15 points)
    Jul 1, 2012 11:25 AM in response to -Rotten Apple-

    I can boot up in safe mode but there is still stuff on the screen and I did a hard drive check in single user mode and still it dosen't work. I tried unpluging the HDD and it's still doing it.