Skip navigation

Macbook pro Retina display USB port right is 2.0?

4122 Views 11 Replies Latest reply: Apr 29, 2013 2:42 PM by macuser345 RSS
Daybreakers Level 1 Level 1 (0 points)
Currently Being Moderated
Jun 28, 2012 8:19 AM

I got a new macbook pro with retina display. It says on the website that there should be two USB 3.0 on both side. I have a external hard drive that is 3.0 USB i plug it to the right side and the colour indicates that it is a USB 3.0, plugging it to the right side, turned green and that indicate a 2.0 Instead. So what is going on?

MacBook Pro (Retina, Mid 2012), iOS 5.1.1
  • keg55 Level 5 Level 5 (5,600 points)

    Since it's new, you may want to setup an appointment and visit a local Apple Store and let them check it out for you. Unless an Apple Store is not an option, no need for you to try and troubleshoot.

  • FatMac\>MacPro Level 4 Level 4 (2,065 points)

    Daybreakers wrote:

     

    ... I have a external hard drive that is 3.0 USB i plug it to the right side and the colour indicates that it is a USB 3.0, plugging it to the right side, turned green and that indicate a 2.0 Instead...

    Did you mean left side and right side? If so were file transfer rates faster on one side than the other?

  • keg55 Level 5 Level 5 (5,600 points)

    Have you applied the MacBook Pro (Mid 2012) Software Update 1.0? It should be available via Software Update or from the link I provided. If you do have the update applied, you should still take it to an Apple Store to check out.

     

    Mine are both 3.0.

     

     

    Screen Shot 2012-06-28 at 4.18.20 PM.png

  • whatheck Level 5 Level 5 (4,040 points)
    Currently Being Moderated
    Jun 29, 2012 12:15 PM (in response to Daybreakers)

    I had some luck with these terminal commands. The drive mounted and showed the right speed in System Profiler. I recommend copying and pasting the commands into the terminal if you're not comfortable there.

     

    sudo mv /System/Library/Extensions/PXHCD.kext /System/Library/Extensions/PXHCD.kext.not

    sudo touch /System/Library/Extensions

     

    Reboot the system after running these commands.

     

    I had migrated from my previous machine and had this problem. I restored it, and it worked fine. I put everything back on and started isolating. This extension seems to be from when I had installed LaCie drivers on the old machine.

  • keg55 Level 5 Level 5 (5,600 points)
    Currently Being Moderated
    Jun 29, 2012 12:30 PM (in response to Daybreakers)

    I actually had the same experience this morning as you described. I plugged my USB 3.0 WD My Passport external drive into the left port (right port empty) and it negotiated to USB 3.0 (USB 3.0 SuperSpeed bus). After I ejected the drive, unplugged it; then plugged it into the right port it negotiated to USB 2.0 (USB 3.0 High Speed bus). So, I unplugged the USB cable from the right port and rebooted. This didn't fix it.

     

    The solution for me was to leave the USB cable plugged into right port and unplug the end to the device. Then plug it back in. After doing this, the drive in the right port negotiated to USB 3.0. I followed the information in this Apple article.

     

    USB 3 devices are not activating or not appearing on the USB 3 bus. What could be wrong?

    • Sometimes unplugging and plugging the device back in can resolve the issue.
    • Try plugging the device into another USB port on the computer.
    • Try restarting your computer.
  • StuartOnline Level 1 Level 1 (45 points)
    Currently Being Moderated
    Jun 29, 2012 12:51 PM (in response to whatheck)

    Whatheck,

     

    Since June 16th I had been working with Apple for a solution for the UBS 3 not reconizing drives as USB 3.

    This morning Apple called me again to try this Terminal Commands and binggo it solved the problem. All my current USB 3 drives (OWC, LaCie and Iomega) now run at the High Speed USB 3  (Speed: Up to 5 Gb/sec)

     

    Now in my case the cause may have been the fact that I migrated using Time Machine (from a 2009 MBP) to the new MacBook Pro with Retina Display.  Some how it wrote over the Termminal Commands. But anyhow after Appple Tech had me insert the command all is working great. I am a happy camper now.

     

    The Tech did state to me that this may not fix the problem for all.

  • FatMac\>MacPro Level 4 Level 4 (2,065 points)

    StuartOnline wrote:

     

    Whatheck,

     

    Since June 16th I had been working with Apple for a solution for the UBS 3 not reconizing drives as USB 3.

    This morning Apple called me again to try this Terminal Commands and binggo it solved the problem. All my current USB 3 drives (OWC, LaCie and Iomega) now run at the High Speed USB 3  (Speed: Up to 5 Gb/sec)...

    Is "this Terminal Commands" the ones that whatheck used?

     

    And now that everything is running "Up to 5 Gb/sec," have you been able to boot from any of those drives at USB 3.0 speeds?

  • StuartOnline Level 1 Level 1 (45 points)

    Hi FatMac

     

    "Is "this Terminal Commands" the ones that whatheck used?"

     

    Yes the same commands;

     

    sudo mv /System/Library/Extensions/PXHCD.kext /

    System/Library/Extensions/PXHCD.kext.not

    sudo touch /System/Library/Extensions

     

    "And now that everything is running "Up to 5 Gb/sec," have you been able to boot from any of those drives at USB 3.0 speeds?"

     

    I only use the USB 3 drives for storing data (photos since I am a freelance photographer).

  • keg55 Level 5 Level 5 (5,600 points)

    StuartOnline wrote:

     

     

    The Tech did state to me that this may not fix the problem for all.

    That would be a true statement since I have Western Digital and the PHXCD.kext doesn't exist.

  • macuser345 Level 1 Level 1 (0 points)

    Hey thanks this looks great! I've never used Terminal before though so I'm not sure where to paste the command? Would someone mind telling me how to do it? Thanks

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.