Currently Being ModeratedAug 20, 2012 5:54 AM (in response to Mr. Woo)
is the problem, that Aperture is asking over and over again for the serial number?
To stop Aperture asking for the serial number, check, if you still have an old file "ProAppSystemID" in your System Library.
- Quit Aperture.
- Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
- Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
Currently Being ModeratedJan 2, 2013 6:34 AM (in response to Mr. Woo)
I had the same problem, however I did not have a ProAppsSystemID file in /library.
However I had this file in the /tmp folder, as mentioned in some posts.
When I copied this ProAppsSystemID file to its correct location in /library/proapps Aperture stopped asking for Serial numbers.
Thanks for all your help
Currently Being ModeratedMar 29, 2013 3:56 AM (in response to Pierre Froelicher1)
That just worked for me, but I had to adjust the ownership and acces rights of the file.
If that needs to be done for you, go to Terminal and enter the following commands (assuming the file sits already in the correct directory):
sudo chown root:wheel ProAppsSystemID
sudo chmod 666 ProAppsSystemID
And voilá Aperture works as expected.
p.s.: @Pierre: Please take note that the correct location is /Library/ApplicationSupport/ProApps
and not /Library/ProApps as you stated above.
Currently Being ModeratedApr 6, 2013 5:31 AM (in response to digitalboi)
I am having the exact same problem but I dont have that file anywhere on my computer...
Are you signed in as an administrator? Aperture needs admin permissions to write to the system library. Check if anything in this support article does help: Troubleshooting Professional Application Serial Numbers
Currently Being ModeratedApr 6, 2013 5:39 AM (in response to digitalboi)
Where else have you searched? And how? Sometimes the file will only be written to the /tmp folder after you quit Aperture and log off and on.
To check the /tmp folder open a Terminal window and type
and hit "return". That will open a Finder window in the private system folder, so be careful, not to remove anything.
Do you see the file appear there, after you quit Aperture?
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points