Currently Being ModeratedJun 4, 2012 7:49 PM (in response to dportis47)
Hi Folks, To reply to the "how long will it (jacobean fix) last" questions. My 23" monitor (supplied with a 90W brick) worked with the 150W brick, but Apple would not/could not sell me one. SO - I used the Jacobean fix mid November (2011) - Monitor still going strong as well as all USB and firewire ports at back. I must admit, I still think Apple should address this issue. There has to be a cheeper solution than a replacement monitor for A$900.00. Many thanks to all the contributors to this forum.
Currently Being ModeratedJun 4, 2012 8:13 PM (in response to robin2468)
I did the paper trick and it worked! I'm happy now!
Currently Being ModeratedJun 5, 2012 6:02 AM (in response to robin2468)
My paper fix has worked since April of last year! I did have to redo it once, but it's working like a charm. Shame Apple has never addressed this. Now that I'm sure all are way out of warranty, I doubt we'll see it happen. It's the only Apple product I've ever been disappointed with. Even my original iBook is still working.
Currently Being ModeratedJun 5, 2012 6:26 AM (in response to dportis47)
I'm sure you all understand the possible issues with the 'pin block hack'. Be careful not to block the wrong pins (as the connector is inserted), because it cause the other pins to become overloaded since they are carrying the 24V at more than 3 Amps.
If you are willing to open the display up take a look at my blog, it may help to diagnose the fault if it is the same issue (linked on page 18 of this thread). A1082 on ehmac.ca should get the credit for the fix I used.
Only the 30 inch display was sold until 2010, the others were stopped in '08 and '09, so all of these Aluminium bezel displays are out of warranty & probably extended Applecare coverage. I think they have lived beyond the period any court would see as being 'fit for purpose'.
Currently Being ModeratedJun 21, 2012 8:16 AM (in response to lebungleski)
Paper trick works for me. I hope to last .I was trying to sell the screen for 50$ and luckily found this post today !
Currently Being ModeratedJun 21, 2012 9:00 AM (in response to Cubanero)
It worked for me too - on a 23" screen. I could not get it to work with a bit of paper - too fiddly and weak - but I did get it to work with a 1mm x 30mm strip cut from a transparent plastic cup, folded into a W shape, and fitted as others have described.
It has been working for 2 months now.
I am keeping my fingers crossed!
Currently Being ModeratedJun 27, 2012 8:55 PM (in response to lebungleski)
another dead cinema display. Mine is blank, no flashing lights, shows 24V at the brick when tested with a multimeter. When it is plugged in the video card seems to recognise there is something there. This is based on the fact that when I have a second monitor plugged into the video card, it only works when the apple display is not connected.
I've tried to contact Apple by phone to avoid having to make a genius bar appointment to determine the cost in Australia of the exchange fix. But of course they wont tell me!
Has anyone in OZ found out recently the cost of the exchange repair? Mine is 4 yrs old so still not classed as vinatge so theoretically I can get an exchange repair.
thanks in advance,
Currently Being ModeratedJun 28, 2012 12:15 PM (in response to lebungleski)
Paper fix worked great.
For any who find this thread in the future.
DON'T USE TAPE.
I tried making a piece of plastic out of tape folded just small enough to cover the middle pin, but when I jammed the plug in (the tape was kinda thick), it smashed it all over the place and it took me over half an hour to scrape it all out of both ends of the plug because the smashing exposed the adhesive on the tape and made it stick to everything. What I eventually did was just to stick a W shaped paper in the power brick end (female) and it worked great.
If you feel like paper doesn't insulate enough, try plastic or tape, but be warned about the tape.
This is how I placed the paper. I used the paper you get when you get a rebate check on the part of the check you tear off, so it was a bit thicker than normal copy paper.
Currently Being ModeratedJul 15, 2012 7:15 AM (in response to MacBook Ghost)
Thanks, jakobeon - you fixed my cinema display. Got it used a while ago, and I've moved it around a couple times before, but today I got the short-long-short -issue. I cut a thin slice of tape and put it on the plug to one side at the middle pin location, then folded it inside the plug, pushing it in just a bit with tweezers. Then I just connected, and the display woke up like it was never broken.
Currently Being ModeratedAug 7, 2012 8:47 PM (in response to lebungleski)
this fix worked for me too! i used electrical tape. took me a couple of tries, but eventually it worked. is this just a temporary fix?
Currently Being ModeratedAug 7, 2012 8:56 PM (in response to Chris Dumlao)
Still working for me. Although, I did have to replace it once when I unplugged it and it ripped up the paper.
Currently Being ModeratedAug 22, 2012 8:01 AM (in response to lebungleski)
I have the original 23" Cinema Display -- the one with a plastic frame around the LED screen -- whose AC adapter got lost in shipping. There are replacements available, both new and used, but none of them seem to include the DC cable that goes from the brick to the back of the display. The power adapter is an A1097. Does anyone know where I might locate that cable, or know a part number for it? (Apple can't help with either question.) I think its connectors are the same 5-contact plugs some of you have been fiddling with in this discussion.
Currently Being ModeratedAug 22, 2012 8:26 AM (in response to earlyzee)
There are replacements available, both new and used, but none of them seem to include the DC cable that goes from the brick to the back of the display.
They wouldn't include that as a separate cable, on the Apple 23" cinema display it is fixed to the back of the screen, and cannot be removed.
I don't know what you mean by the 'plastic frame around the LED screen' on a 23" display, Apple only made 23" displays in Aluminium, there is plastic on the edges, but that is not really worth mentioning. Download mactracker.ca & check the model is correct. It sounds like you may have an older display, possibly with one of these supplies?
Currently Being ModeratedAug 22, 2012 9:04 AM (in response to Drew Reece (Re:co))
Apple did make a 23" all-plastic Cinema Display. Here's the spec sheet:
Its power adapter is square and 90 watts (even though the spec sheet says 70 watts), and although it may not have carried the A1097 product number at the time (even Apple is not sure!) it is functionally and physically identical to it. The "out" cable from it has a plug at each end which matches the plugs used on the brick-end of the newer aluminum-series cables. It is not hard wired to the display.
Currently Being ModeratedAug 22, 2012 9:27 AM (in response to Drew Reece (Re:co))
And thank you for the tip about Mactracker, Drew. It looks great.
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points