Currently Being ModeratedAug 30, 2012 7:37 AM (in response to lytebyte2002)
Is this a deck? Don't think you're supposed to mount it on the desktop. Decks usually connect via firewire or a capture card and are either controlled via firewire or a seperate control interface that requires a rs422 (If I remember correctly) to a usb adapter.
Looking at the specs for this deck, it does have ilink which is sony's name for firewire.
Currently Being ModeratedAug 30, 2012 8:16 AM (in response to Michael Grenadier)
Yes it is a deck. It mounts the disc to the desktop like a drive. So should come up on the desktop as soon as you put the disc in the deck. It connects by a fireweire 400 so that is all hooked up.
Ive even updated the deck itself now and still no results.
Currently Being ModeratedAug 31, 2012 12:53 AM (in response to David Mclaine)
Yes alll the other machines are running 10.7.4 and only one machine out of the 5 works with the deck. I installed the latest FAM driver but can you confirm which one you tihnk to be the correct one?
Currently Being ModeratedAug 31, 2012 1:26 AM (in response to lytebyte2002)
You need to find out what is different about the machine that works with the deck, see if the driver installed on that machine is a different version. I don't know which version is the correct one but it has to be compatible with your OS of course.
Currently Being ModeratedOct 30, 2012 5:09 AM (in response to lytebyte2002)
Check the firmware of the deck. I had same issue all my sofware on mac was up to date.
I had an other deck with curent firmware that i switched out and it worked like a charm.
Hope this helps.