Currently Being ModeratedSep 25, 2012 10:30 PM (in response to Sandra MacPherson)
The short answer is yes, if you are using your G5 as a print server it will continue to work.
... my Powerbook running OS 10.6.8.
Please clear up my confusion about this though - a Powerbook can't run Snow Leopard. Did you mean a MacBook?
If your G5's only task is to act as a print server - in other words, your LaserWriter must be connected directly to the G5 for it to print - you can relieve it from that duty easily enough.
This USB to parallel adapter cable will work, I have tried it myself with your printer:
Plug it in and it works. Read this old thread for more: USB to Parallel Cable for LW Select 360?
Since you would like to print from a portable, a wireless print server is an ideal solution. These are becoming hard to find with a parallel port, but this one should work:
I have a similar one, tried it with your LaserWriter and it works too.
These solutions mean you will also be able to retire your AsanteTalk bridge.
Here is another old thread good for some more details:
The only disadvantages I have been able to determine while either the USB to parallel adapter cable, or the print server, is that high level bidirectional communication does not work. The manifestation of this is that the printer will not be able to tell the computer that it is out of paper or that it has a paper jam, for instance. However, the print server and cable are both intelligent enough to know when the printer is ready to accept the job, or not. In other words, basic printing functions will be fine, but the printer will lose its ability to communicate things like a page count, or that its toner is getting low.MacBooks iMacs iPods AirPorts, OS X Mountain Lion, 27 years Apple!
Currently Being ModeratedSep 26, 2012 10:06 AM (in response to John Galt)
Thanks John. I haven't tried disconnecting from the G5, but I'll give that a shot. Seems like such a shame. I've had that tower for so long and it was such a great "old faithful".
I don't do a lot of printing from the LSW 360, but it keeps on working and I'm not one of those to discard old equipment if I can still use it.
My concern was that I had read (somewhere) that there would be issues upgrading past 10.68 to the new operating system. Seems whenever I ask someone at the Apple store about an issue with this printer (that may be as old as them), they just look at me blankly.
And yes, I am using a MacBook. : )
Thanks again. Sandra
Currently Being ModeratedSep 26, 2012 10:40 AM (in response to Sandra MacPherson)
The LaserWriter Select Pro 360 listed for about $7000 back then. That's easily over 10,000 in today's dollars. I think it's worth keeping.
The only obstacle you will encounter upon upgrading past Leopard is the lack of AppleTalk in Snow Leopard and later. The workarounds I posted work for me... tested on both Lion and Mountain Lion, so they'll probably work "for the forseeable future".
You can still use the G5 as a print server as long as you like too.
Currently Being ModeratedSep 26, 2012 12:39 PM (in response to John Galt)
Wow! $7000! Well, at least it keeps working. I have an Epson color printer where the inks dried up after a month and now I just use it as a scanner.
Thanks again John. You've helped me previously with the LSW, so I knew I could get an answer to my question on the Forums. I meant to check your name as "solved my question", but I inadvertently gave myself credit. Oops!
Currently Being ModeratedSep 26, 2012 8:32 PM (in response to Sandra MacPherson)
Glad to help.
I thought you sounded familiar. Here is your old post:
Since then I sold my AppleTalk equipment but with these workarounds all my old printers work fine
There is no reason to retire them. With Printopia, I can even print to my LaserWriter from an iPad.