Currently Being ModeratedOct 5, 2012 2:29 PM (in response to Eric Maier)
Folks, this is interesting. Bluetooth is actually influencing the Wifi connection. Look at this test that I just did on a replacement phone that is being working good.
Test#1: Bluetooth ON and Bluetooth Heaset Connected. Results 21.98Mbps on Wifi WPA2
Test#2: Bluetooth ON and Bluetooth Heaset Disconnected. Results improve to 22.77Mbsps on Wifi WPA2
Test#3: Bluetooth OFF. Results Solid 24Mbps on Wifi WPA2
Currently Being ModeratedOct 5, 2012 2:42 PM (in response to C4RLOCO)
Just one thing totally off-topic (seen that the issue was hardware related)
What I remembered from network-throughput issues on WIFI:
Try to only use AES in stead of TKIP/AES together. It enchanced my network times 10! (54 Mbps connections as well as 300 Mbps connections)
Currently Being ModeratedOct 5, 2012 2:55 PM (in response to C4RLOCO)
That is interesting, a noticeable but probably tolerable drop. So, on a broken phone, if it's a software bug, it could be mishandling priorities when everything is running. If hardware, we could have chips that are not up to speed in varying degrees, or have broken hardware-based "prioritizers" if there is such a thing :-)
Currently Being ModeratedOct 5, 2012 2:55 PM (in response to Eric Maier)
It would be interesting to see if the iphone4S people see the same improvment (for those having similiar probs, not the greyed out box) in wifi when bluetooth is off. That would point to software in IOS6 that needs adjusting
Currently Being ModeratedOct 5, 2012 3:22 PM (in response to Eric Maier)
my problem is definitely bluetooth related. I got home and everyhitng was perfect. So I went back out to the car, had it pair with my car and came back in, no connectivity whatsoever. Cycled bluetooth off and on, and everything is back to normal.
Currently Being ModeratedOct 5, 2012 4:37 PM (in response to C4RLOCO)
This just came in:
China Labor Watch is reporting that another Foxconn strike broke out on Friday at the Zhengzhou factory in China. The report says 3,000 to 4,000 Foxconn (2038) are complaining about Apple’s (AAPL) demanding quality standards for the iPhone 5. China Labor Watch further reports that workers are under immense pressure to deliver iPhone 5′s without receiving adequate training on how to improve yield rates.
Currently Being ModeratedOct 5, 2012 4:42 PM (in response to C4RLOCO)
I shut down WPA2 on my Airport and was able to use icloud to sync my apps to my phone. After I did that I turned WPA2 back on and shut off my phone and turned it back on again and it recognized my router. I haven't gone far away or tested its speed but it does seem to be working. Now I don't know what to do. Keep or return?
Currently Being ModeratedOct 5, 2012 5:15 PM (in response to Shaddow)
I always keep bluetooth off but the essence of my message was that I seem to have fixed it by turning off the router security, downloading stuff, and then turning it back on. Any explanations?
Currently Being ModeratedOct 5, 2012 5:26 PM (in response to C4RLOCO)
C4RLOCO: I'm curious, when you got your new phone, did you re-pair your phone with your bluetooth devices? As with me, this may have actually been what fixed you, and not the new phone.
When I was resetting my phone up after all of my DFU restores and setting up as a new phone etc, I only "replaced" my phone in my car's setup. This phone profile in my car has been there and just replaced each time since like my iphone3g or original iphone. My wife, who never had any problem, set hers up as a new phone in her car.
These types of differences may be why everyone is having different experiences with exchanges working/not working, working for a day or so (until they get things reset back up with BT etc). Not to mention this BT thing isn't likely the only problem people are having.
Also, at least one non iphone5 user (an iphone 4) that was having probs after IOS6 has said that IOS6 turned on his BT and he never uses it, and that turning it off so far has fixed his issue.
Currently Being ModeratedOct 5, 2012 5:32 PM (in response to C4RLOCO)
I am using a Cisco 4200 and had exactly the same problem. iPhone 5 would not connect to encrypted signal, but would be OK for the GUEST regular signal.
Went to Apple store, they replaced the phone and the 2nd phone works well uisng the fast encrypted signal.(based on MAC Address both manufactured by Apple)
The guy at the Apple store said they had something like 50 defective phones (total) and my phone will be returned as an "engineering failure unit".
Currently Being ModeratedOct 5, 2012 5:46 PM (in response to Shaddow)
I went down and completely deleted my car stereo profile, then reset network settings for good measure.
Still no connection via AES. Bluetooth On/Off clearly influences the flakiness of my AES Wifi connections (but still, it's always, 100% flaky). Fascinating find.
The Wifi & Bluetooth systems are clearly closely interrelated. I think we've established that people should troubleshoot both systems if they are having problems with either.
Maybe you'll be a lucky one that just has a corrupted BT profile or something in there!
I guess I need to hound the Apple Store & find out when my replacement is coming. I sure hope everything works!