Skip navigation

Moving Software to SSD

194 Views 4 Replies Latest reply: Oct 11, 2012 8:16 PM by JamaicanBMW RSS
JamaicanBMW Level 1 Level 1 (0 points)
Currently Being Moderated
Oct 11, 2012 7:54 PM

I currently own a MacBook Pro 13" (Spring 2011) with 4GB RAM & 320GB HHD. I'm considering installing a 512GB SSD from Crucial.

 

One: Is it compatible with MacBook Pros?

Two: [see below]

 

How would I transfer all my important software to the SSD? Would I need to put in product keys again? I have software such as: Microsoft Office, Adobe CS5 (Photoshop, Illustrator, InDesign), Final Cut Studio (Final Cut Pro 7, Motion, DVD Studio Pro, etc.)

 

 

Can I put that in a safe location to install onto the SSD?

MacBook Pro, Mac OS X (10.7.3), Spring 2011 MacBook Pro
  • Kappy Level 10 Level 10 (221,005 points)
    Currently Being Moderated
    Oct 11, 2012 8:01 PM (in response to JamaicanBMW)

    1. Yes.

     

    2. Clone your existing system to the SSD. You'll need an enclosure for either the SSD or your existing HDD. Use Disk Utility to clone.

     

    Clone Lion using Restore Option of Disk Utility

     

    Boot to the Recovery HD:

     

    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

      1. Select Disk Utility from the main menu then press the Continue button.

      2. Select the destination volume from the left side list. 

      3. Click on the Restore tab in the DU main window.

      4. Check the box labeled Erase destination.

      5. Select the destination volume from the left side list and drag it to the

          Destination entry field.

      6. Select the source volume from the left side list and drag it to the Source entry field.

      7. Double-check you got it right, then click on the Restore button.

     

    Destination means the external backup drive. Source means the internal startup drive.

  • Kappy Level 10 Level 10 (221,005 points)
    Currently Being Moderated
    Oct 11, 2012 8:12 PM (in response to JamaicanBMW)

    I mean an external hard drive enclosure to use with either the SSD or your existing HDD. Here's the whole process;

     

    How to replace or upgrade a drive in a laptop

     

    Step One: Repair the Hard Drive and Permissions

     

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.

     

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

     

    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.

     

    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.

     

    Step Four: New Hard Drive Preparation

     

      1. Open Disk Utility in your Utilities folder.

     

      2. After DU loads select your new hard drive (this is the entry with the

          mfgr.'s ID and size) from the left side list. Note the SMART status of

          the drive in DU's status area.  If it does not say "Verified" then the drive

          is failing or has failed and will need replacing.  Otherwise, click on the

          Partition tab in the DU main window.

     

      3. Under the Volume Scheme heading set the number of partitions from

          the drop down menu to one. Set the format type to Mac OS Extended

          (Journaled.) Click on the Options button, set the partition scheme to

          GUID  then click on the OK button. Click on the Partition button and

          wait until the process has completed.

     

      4. Select the volume you just created (this is the sub-entry under the

          drive entry) from the left side list. Click on the Erase tab in the DU main

          window.

     

      5. Set the format type to Mac OS Extended (Journaled.) Click on the

          Options button, check the button for Zero Data and click on OK to

          return to the Erase window.

     

      6. Click on the Erase button. The format process can take up to several

          hours depending upon the drive size.

     

    Step Five: Clone the old drive to the new drive

     

      1. Open Disk Utility from the Utilities folder.

      2. Select the destination volume from the left side list.

      3. Click on the Restore tab in the DU main window.

      4. Check the box labeled Erase destination.

      5. Select the destination volume from the left side list and drag it to the

          Destination entry field.

      6. Select the source volume from the left side list and drag it to the

          Source entry field.

      7. Double-check you got it right, then click on the Restore button.

     

    Destination means the new internal drive. Source means the old external drive.

     

    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.