Skip navigation

Tethering Canon 5D MkIII w/10.8

9738 Views 22 Replies Latest reply: Nov 15, 2012 12:28 AM by stevenfromdapto RSS
  • teefus Calculating status...
    Currently Being Moderated
    Oct 16, 2012 7:35 AM (in response to Andrew_F)

    i have an imac running 10.8.2 and a macbook pro running 10.6.8 and using lightroom 4.2 i can't get my 5dmk3 to shoot tethered. i updated the camera firmware to 1.1.3 and still can't get it to work. any ideas? thanks, craig

  • Bogeyfire Calculating status...
    Currently Being Moderated
    Oct 16, 2012 8:04 AM (in response to teefus)

    So far, I haven't seen any official response from Apple.  I went to the "Genius Bar" and they claimed ignorance.  Then I talked to Calumet Camera.  They know all about it.  Guys like us are out of business if our business is based on "live proofing".

     

    I use Capture One.  Its the same story.  Mountain Lion worked fine until the latest update.  Now Apple / Canon are hiding their heads pretending that the issue isn't there.  BASTARDS!!!

     

    I use the Canon 5D mark II.  Temporarily, I am using the Eye-Fi Pro SD card to transmit low jpegs to my Pwr Book.  I have to use an adapter in my camera because it uses CF cards, not SD.  It kind of works, but Eye-Fi's Tech Support says that the adapters cause issues.  I've already had one.

     

    During a shoot the card read, "Card Full".  I transfered all the images, then erased all the images from the card.  The camera still said, "Card Full"!  The only way to get it working again is to plug it into the computer, lauch the disk utility, open the "erase" tab, and clear the card.  Its working agian, but Eye-Fi says not to expect it to continue.

     

    Come on Apple!  Tethered shooting worked fine in the preliminary version of Mountain Lion.  Fix it!!!

  • Aye Es Oh Level 2 Level 2 (330 points)
    Currently Being Moderated
    Oct 16, 2012 10:16 AM (in response to teefus)

    A buddy of mine uses a 5D Mark III regularly with Aperture, and he's able to tether without any problems, although he doesn't use an Eye-Fi card.

     

    If you've got problems with Lightroom's tethering, that might be a good reason to switch to Aperture.

  • stevenfromdapto Calculating status...
    Currently Being Moderated
    Oct 16, 2012 2:43 PM (in response to teefus)

    Hi teefus,

     

    I am running 10.8.2 on an iMac and on a Macbook Air, both wiith Lightroom 4.2 and I can shoot tethered with the Canon 5D Mk III on both of them. As mentioned in previous posts this was not always the case but since the latest update to Lightroom I have no problems at all.

     

    The fact that I can shoot tethered with the 5D3, 10.8.2 and Lightroom 4.2 indicates that the issue for you is not with  software compatibility but a different problem.

     

    If you are sure you have 10.8.2 and Lightroom  with the latest updates, as well as the latest Camera Raw 7.2 if shooting RAW, then I think you need to look at other issues. Settings, cables, other software causing conflicts maybe -  hard to pinpoint what the problem may be but again, 10.8.2, LR4.2 and the 5D3 do now live happily together.

     

    Steve

  • teefus Level 1 Level 1 (0 points)
    Currently Being Moderated
    Oct 16, 2012 3:08 PM (in response to stevenfromdapto)

    thanks, steve. i'll check the camera raw version tomorrow but i have used lightroom 4.2 to open raw mk3 files captured to a card. not sure what other software would be causing a conflict as lr 4.2 tethers my mk2 all the time.

  • teefus Level 1 Level 1 (0 points)
    Currently Being Moderated
    Oct 18, 2012 5:58 AM (in response to Andrew_F)

    o.k., this is totally bizarre but after trying for several days, this a.m. the mark 3 tethered successfully to LR 4.2 and captured images. i didn't change anything on the camera, settings, software, cables, etc. um, wow.

  • markfromoakland Level 1 Level 1 (0 points)
    Currently Being Moderated
    Nov 14, 2012 2:19 PM (in response to Andrew_F)

    Any one make any progress with Capture One Pro 7?

     

    In the meantime, I'm trying to tether to LR 4 and not getting anything yet.

  • stevenfromdapto Level 1 Level 1 (0 points)
    Currently Being Moderated
    Nov 15, 2012 12:28 AM (in response to markfromoakland)

    Have you updated  to LR4.2?  I am tethering constantly now with no issues at all.

1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.