Skip navigation

Archive&Install of Leopard taking over 29 hours & stuck at 13 mins???

530 Views 6 Replies Latest reply: Oct 18, 2012 2:30 PM by Neville Hillyer RSS
debzidoo1 Calculating status...
Currently Being Moderated
Oct 17, 2012 5:42 AM

My macbook has been having a host of issues since I realised time machine backups were not running.

 

Slightly worried that I have just broken the whole machine but hoping someone here may have some advice.

 

I have repaired disk and my internal HD is fine. I repaired disk permissions and since then the machine has been completely freezing on startup, stuck on the grey apple screen with spinning wheel before eventually proceeding to the blue screen of death...

 

I have had to force shutdown now several times, trying to reboot in safe mode or from the Leopard disk kept failing as the machine kept ejecting the disk immediately on startup.

 

I left it overnight then retried booting from the disk, it started up and not sure why now but I decided I should do an archive and install of Leopard.

 

The install has now been running for 29 hours and has been stuck at '13 minutes remaining' for at least 6 hours.

 

What should I do? I am really scared to quit the installation but it doesn't seem like it's going to proceed? Please help!

MacBook, Mac OS X (10.5.8)
  • Neville Hillyer Level 4 Level 4 (1,845 points)

    1 - Backup all data (at least home folders but preferably whole disk) to an external disk with Carbon Copy Cloner - don't go further until you are sure everything you want to keep has been backed up and is readable

     

    2 - Make sure your DVD drive is working

     

    3 - Boot from OS install DVD

     

    4 - Erase the disk

     

    5 - Install the OS from DVD

     

    6 - Update with Software Update

  • Neville Hillyer Level 4 Level 4 (1,845 points)

    There is something seriously wrong if Carbon Copy Cloner fails.

     

    Do you know that your early September backup will work?

     

    Is there data later than this which you would like to recover?

     

    If you have firewire and another Mac you could try Target Disk Mode?

     

    It is for situations like this that I always split my main disk into at least 2 volumes with working OSs on each volume.

  • Neville Hillyer Level 4 Level 4 (1,845 points)

    debzidoo1 wrote:

     

    The archive and install did finally finish, and everything appears as it should do

     

    If this is so then ignore my earlier advice which was given because you said that you could not complete archive and install.

     

    Target Disk Mode only works with firewire.

     

    Perhaps it is OK now.

     

    Good luck.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.