Currently Being ModeratedJul 26, 2012 6:25 PM (in response to childsc)
Weel i am sorry but i do not have a solution.
Yet i have a similar problem.
I mean my Upgrade went very well, but Server App asks me to type the password ofmy airport extreme, but all the times did not work.
Thus i decided to reset the airport extreme. All connections works great, but Server App needs the password. Once again i type it but there is an error, as if the password was uncorrect.
Now if i do not fix this issue i cannot use my server because i cannot connect to it.
Thanks for the help
Currently Being ModeratedJul 27, 2012 7:10 AM (in response to cavalieredona)
I dont know if this would carry over to Airport, but whenever I had an "Error Reading Settings" for Wiki service or Profile Manager, it was related to the Postgre service being off/having bad permissions on the server.
Check around the discussion boards, and maybe open up your console and see if you are getting reoccuring errors (every 20-30 seconds or so, if Postgre is having a hard time launching)
Might help, might not. I just spent a few days investigating it and gave up, exported my services/settings, and remade my Lion Server.
Currently Being ModeratedJul 27, 2012 6:19 PM (in response to childsc)
I am getting an exact same error. Also mail filtering settings are not being saved.
Currently Being ModeratedJul 30, 2012 5:10 AM (in response to childsc)
I am having the same issue.
I manually added the necessary port mappings using the airport utility and everything now seems to be working but my server is still returning the same error message. On the rare occasions it is able to see the timecapsule/airport port mapping it is not recognising any of the manually added port mappings and is only showing those that originated from the osx server interface.
Currently Being ModeratedJul 31, 2012 1:24 PM (in response to childsc)
Unfortunately the only way I could fix the problem and bring it back to normal was to do a clean install. Prior to the clean install I tried Restoring from a Time Machine backup to the backup made just after I installed it to no avail. I also tried restoring my airport Extreme/express' back to factory defaults thinking it was something with those.As in anything else....when all else fails.....
Currently Being ModeratedJul 31, 2012 2:35 PM (in response to childsc)
I too had this issue after the upgrade. I just close server app and delete the network folder under /Library/Server/Network. Reopen server app and it reconfig itself
Currently Being ModeratedJul 31, 2012 8:14 PM (in response to childsc)
Hi to everybody, i think i have fixed doing what it is written on the Post "Server cannot Access my AEBS".
Currently Being ModeratedAug 2, 2012 11:29 PM (in response to Tho615)
@Tho615 … I was considering a clean install even though I just did one and as a last effort tried this and it worked. Thank you.
Currently Being ModeratedAug 5, 2012 9:02 AM (in response to childsc)
After doing a Re-install, everything was working again. Then.........happened again! I figure there must be a bug somewhere. Anyways doing the solution from Tho615 fixed the situation until the next time. However, after doing what he said I had to re-boot my system to fix it. Thanks for the help!
Currently Being ModeratedOct 11, 2012 7:34 AM (in response to childsc)
Even though this fixes the issue at first. I continue to get the reading when I triy to add multiple Public Services using OS X Server. I think there is still a bug between Server & Airport Extremme.