Skip navigation

Can battery status "replace now" cause macbook pro to slowdown?

16210 Views 7 Replies Latest reply: Mar 14, 2014 3:07 PM by rc.rookie7 RSS
Navigator 19 Calculating status...
Currently Being Moderated
Oct 25, 2012 8:19 AM

I have an early 2011 - 13 inch macbook pro. It is around 16 months old and already has a battery status of "replace now". The battery is completely dead. Before I had a battery status of "Service Battery" and not it is "Replace". After I got this battery status, my macbook pro has become really very slow. The cursor moves really slow and I can't even play any hd movies. I have also tried reinstalling the operating system and setting my macbookpro to factory default. But still no improvements.

The only good thing is that I works fast in the beginning and after a few mins., back to super slow speed.

 

I will be replacing the battery after 2-3 months. Can someone please tell me if the battery status of "replace now" cause the slowdown? And any recommendations for fixing this until I get the battery replaced?

 

Any help is really appreciated. Thanks!

MacBook Pro
  • dominic23 Level 6 Level 6 (18,390 points)

    Battery is an integral part of the power system.

    A non-functioning battery can cause problems including slowing down the computer.

     

    Graphic intensive applications draw additional power from the battery.

     

    "Service Battery" means replace the battery as soon as possible.

    "Replace Now" means replace the battery now.

     

    Best.

  • ds store Level 7 Level 7 (30,305 points)

    16 months? Wow, I hope you bought AppleCare.

     

    Go to your Apple menu > About this Mac > More Information > Power > Battery and copy all the information and paste it here.

     

    I have a Early 2011 machine too. Thanks

  • wjosten Level 10 Level 10 (91,280 points)

    Yep, processor speed is automatically reduced. Your situation is the same as if you didn't have a battery installed Read here:

     

    http://support.apple.com/kb/HT2332?viewlocale=en_US&locale=en_US

  • oliveira04 Calculating status...

    I'm having the same issue. Early 2011 Macbook Pro, 8GB RAM, about two years, pretty intensive use of battery. Couple of weeks ago, the status was 'check battery', but after I updated the SMC firmware, the status changed to 'replace now'. So now my mac gets really slow after a few minutes of use. It startsup ok, but later on, even when typing an adress in Safari takes a while to the charecters appear after I hit the keybord, and the video playback is terrible. This is very annoying. I will absolutely have to replace my 248 cycle dead battery much sooner than what I'd expect.

  • Dhalgren Calculating status...

    No guarantees but this worked for me:

     

    My Mac started running really slow when my battery died. I have a MBP (early 2011) with a built-in battery.

     

    I checked Activity Monitor (/Applications/Utilities/Activity Monitor) and found that PID O, kernel task, was taking up 500% of CPU. Normally, it's < 5% at all times. I searched online and found the following fix. Though my battery was still dead, performing this fix solved my problem. Speed improved to normal. I still had to get my battery replaced but now my MBP is completely okay. I would check Activity Monitor. If PID 0 is taking up a lot of CPU %, you may want to try this.

     

    BTW, the fix removes a .plist related to SMC thermal control. I don't know why it works but it worked for me. It looks a little scary to do but I had no problems and it worked instantly.

     

    Here's the link: http://www.rdoxenham.com/?p=259

     

    Don't follow the advice in the main text. Follow the advice in the comments, by "bryazana:"

     

    1. Go to About this mac under the apple in the upper left and click on More info

    2. Click on system report

    3. make a note of what it says after Model Identifier

    4. go to your master drive – System -Library – Extensions – IOPlatformPluginFamily.kext -Contents – Plugins – ACPI_SMC_PlatformPlugin.kext – Contents – Resources – find the name from step 3 and move it to a folder that you can find again if needed.

    3. Restart and you’re done

    I hope this helps.

  • davidnajeradj Calculating status...

    Thanks it was really helpfull, now mi mb is running great but is getting hot .. Any suggestions?

  • rc.rookie7 Calculating status...

    I almost gave up after trying different things SMC and NVRAM reset multiple times, erased my HDD and reinstalled OS twice. Dhalgrensolution seems to work for me and i dont face the lagging performance issues anymore.

     

     

    Thanks a bunch!

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.