Skip navigation

Black screen after installing OS X Mountain Lion

2138 Views 5 Replies Latest reply: Nov 5, 2012 10:32 AM by Kappy RSS
Monsieur Kimmo Calculating status...
Currently Being Moderated
Nov 4, 2012 12:20 PM

Hi,

 

I have a 4 year old Mac Book Pro 15". I runned OS X Lion on it and upgraded to Mountain Lion. After installation computer booted itself and after that only black screen appears and nothing else. I tried to zap Pram (command option p r) but it did not help. Can it be that Mountain Lion is not compatible with older macs? Any suggestions what to try next.

MacBook Pro 2.2Ghz 2 Core, Mac OS X (10.6), Matrox MXO2 IO Card, LaCie 2T HD
  • Kappy Level 10 Level 10 (221,165 points)

    Macs that can be upgraded to OS X Mountain Lion

     

      1. iMac (Mid 2007 or newer)

      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)

      3. MacBook Pro (Mid/Late 2007 or newer)

      4. MacBook Air (Late 2008 or newer)

      5. Mac mini (Early 2009 or newer)

      6. Mac Pro (Early 2008 or newer)

      7. Xserve (Early 2009)

     

    If your MBP is in the above list then it works with Mountain Lion. So, your installation didn't work quite right. Possibly due to upgrading over an already dysfunctional system or you have incompatible third-party software and/or peripherals involved.
    Disconnect all your third-party peripherals. Try restarting. If it still doesn't startup properly, then try booting into Safe Mode and see if that works. If it does, then you probably have some incompatible software installed. Possibly installed drivers for one or more peripherals.
    iMac, OS X Mountain Lion (10.8.2), MPro, MBPs, MBs, iPods, iPads, ATV
  • Kappy Level 10 Level 10 (221,165 points)

    It means that if you own a MBP model that is Mid or late 2007 or NEWER, then you can install Mountain Lion. You stated you have a 4 year old MBP which would mean it was from 2008. Since 2008 models are NEWER than 2007 models, your model will run Mountain Lion.

     

    My suggestion at this point is the following. Be sure to disconnect all third-party peripherals.

     

    Reinstalling Lion/Mountain Lion Without Erasing the Drive

     

    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.

     

    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.

     

    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.

     

    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Kappy Level 10 Level 10 (221,165 points)

    First, a system upgrade cannot physically damage the GPU. Secondly, the GPU is physically soldered to the motherboard and cannot physically break. However, it can fail. Depending upon the exact model you have it may be eligible for a free retrofit of the GPU. See MacBook Pro: Distorted video or no video issues.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.