Skip navigation

Need help with new Airport installation on PB G4????

398 Views 10 Replies Latest reply: Nov 6, 2012 8:17 AM by Cattus Thraex RSS
hankdz2 Calculating status...
Currently Being Moderated
Nov 4, 2012 9:25 AM

I just installed an old Airport card in my PB G4. It will not connect via my wifi at home. It is an Overdrive Pro 063. What do I need to do?

The firmware is version 9.52.

Thanks

PowerBook, Mac OS X (10.4.11), Powerbook G4 867 Mhz; Airport Card
  • Cattus Thraex Level 4 Level 4 (1,715 points)
    Currently Being Moderated
    Nov 4, 2012 12:14 PM (in response to hankdz2)

    Is the airport displayed in the upper right corner? It has the specific semicircular symbol. If yes, how did you try to connect?Screen Shot 2012-11-04 at 22.13.58.png

  • dalstott Level 4 Level 4 (2,445 points)
    Currently Being Moderated
    Nov 5, 2012 10:17 AM (in response to hankdz2)

    The 867 Mhz G4 Powerbooks have a 802.11b Airport Card. Some of the newer routers like Airport Extreme will only work with 802.11g/n cards. The older cards can not be upgraded to an extreme card so you have to go with an external USB Wireless Adapter. I had to do this with my original 1999 iBook to be able to connect to a new Airport Extreme base station.

     

    http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/

     

    http://www.newertech.com/products/mxusb_gb.phpScreen Shot 2012-11-05 at 2.14.08 PM.jpg

  • Cattus Thraex Level 4 Level 4 (1,715 points)
    Currently Being Moderated
    Nov 5, 2012 11:57 AM (in response to hankdz2)

    First of all, reset the base station by pressing the reset button as specified in the manual, usually 5-6 seconds. Then remake setting without any password.

    If you can connect without psswd, pass to the next step, choose a gradual protection level. Note that many non-Apple wl routers requires 13 characters for a psswd, mandatory for Windows users.

  • Cattus Thraex Level 4 Level 4 (1,715 points)

    Yes, because that generation cannot handle newer protection protocols, your newer MBP pro can.

    Any base station has an option to reset and hard reset its settings, usually this is a small hole you must press with a paper clip. If you do not want or do not know how to do this, try at least to lower protection level.

  • Cattus Thraex Level 4 Level 4 (1,715 points)

    No, you must not remove it, as the USB to wl adaptor uses another driver. You may turn old mac wi-fi off, it will be uselessly on anyway.

  • John Galt Level 7 Level 7 (33,075 points)

    hankdz2 wrote:

     

    The base station does not have an option to delete PW. It comes built in. ... It is the older G4 that has issues.

     

    I don't understand how it can be that a base station will not allow the option to create whatever network security you desire, but if Cattus Thraex's suggestions are not working you are probably out of luck.

     

    Firmware 9.52 is the latest available for your PowerBook G4 with its 802.11b AirPort card. It supports WPA but not WPA2. If you have the option, select WPA or WPA Personal in the base station. That is all you can do.

  • Cattus Thraex Level 4 Level 4 (1,715 points)

    This cannot be true, ANY base station has the option to reset it and hard reset it.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.