1 2 Previous Next 20 Replies Latest reply: Nov 9, 2012 12:31 PM by KatieKat008 Go to original post
  • 15. Re: Using Canon for Printable DVDs
    Klaus1 Level 8 Level 8 (44,495 points)

    It might be worth your while to invest in Roxio Toast:

     

    http://www.roxio.com/enu/products/toast/titanium/overview.html

     

    which, apart from all the other excellent things it does, makes it extremely easy to copy DVDs.

  • 16. Re: Using Canon for Printable DVDs
    KatieKat008 Level 1 Level 1 (0 points)

    Old Toad,

     

    Does it matter that I have very little space left on my hard drive?  The DVD I'm making the disc image of is approx. 4 gb.  I have about 7 or 8 gb of space left on my hard drive.  I have an external drive and have moved as much as I can to it already.

  • 17. Re: Using Canon for Printable DVDs
    KatieKat008 Level 1 Level 1 (0 points)

    Klaus1,

     

    I have heard of Toast.  I'll have to check into that.  Thanks!!

  • 18. Re: Using Canon for Printable DVDs
    Old Toad Level 10 Level 10 (115,690 points)

    It makes a very, big difference.  It's strongly recommended to have a minimum of 20 GB or more free space when using iDVD.  For normal use 10 GB minimum is recommended, more if possible.  With inadequate free space iDVD can come to a standstill when it is in the encoding process or give errors in the encoding.

     

    Follow this workflow to help ensure the best quality final product:

    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 

     

    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.

     

    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • 19. Re: Using Canon for Printable DVDs
    KatieKat008 Level 1 Level 1 (0 points)

    I think I am separating the encoding process from the burn process.  But you may be right - I may not have enough free space on my hard drive.  I guess I need a new computer.  Ha, Ha.  I'll have to figure out how to burn the discs at the slowest speed.  I don't remember having a choice in iDVD.

     

     

    Thank you very much for your help!!!

  • 20. Re: Using Canon for Printable DVDs
    KatieKat008 Level 1 Level 1 (0 points)

    Thanks to both Old Toad and Klaus1 for all your help!!  I tried Discus and was able to figure out why I kept getting the error to close the inner cover.  I needed to set an option that was very hard to find and not at all obvious. After doing print setup options, there was another place where I needed to choose "Quality and Media" and set some options there.  "Disc label" had already been selected so I thought that was right but I needed to select "Quality and Media" and pick "Media Type" and select "Printable Disc" for that and "Paper Source" would then change to "Disc Tray". So I was also able to print the disc from DiscLabel as well as Discus. 

     

    Now I just have to be able to create a Disc Image and then I can re-burn and print on all my DVDs.   The "not enough hard drive space" issue is probably the reason I'm having trouble.

     

    Anyway, thank you both so much!!! 

1 2 Previous Next