Little correction: Actually it was bleeping and I was holding the turn off button at the back, (because what else should I do?) and then instead of turning off it opene the new blank window and loaded the login screen.
BUT I've just restarted it and there was no bleeping or whatsoever, it started pretty fast, so I guess the RAM works, no? I think everything should be fine, or does it always bleep only once / the first time?
Thanks guys, hope I don't have to change it out or anything.
Edit: I'm not sure but I think the RAM doesn't work properly... I'm trying to record a game and it doesn't really work, the recording is extremely... "slow", it has like 1 frame per 5 seconds haha. I think with 32 GB of RAM this shouldn't be an issue? It's running at highest quality on the normal iMac resolution (2560 x 1440)
Where did you get the RAM? There have been quite a few threads on here where users have had problems with certain makes of RAM, although most of the issues seem to be related to using 16gb.
The two places that get recommended consistently as providing reliable RAM that works - and with a lifetime guarantee - are macsales.com and crucial.com
Here's a long thread on the subject: https://discussions.apple.com/thread/2473276
Thanks, I got the RAM at crucial.com!
My Mac however does not shut itself down without warning, but I'm going to read this thread further!
Logic by the way works fine, I have very heavy projects and that's why I bought the RAM in the first place. Also with the bridge, in 64 bit mode, I feel that I have lots of memory to my disposition.
I'm just sad that the video game recording doesn't work properly, is maybe some of the RAM damaged? Is there a way to check this? Because I find it strange that the recording has so few frames, when it was recorded with 32 GB of RAM, that should be enough I think. The game and the recording app are both in 32 bit mode, is that the reason maybe? That would be 4 GB for each, I thought that'd be enough.
Thanks for your answer, but what do you mean with horizontally? I can't see your screen unfortunately, could you upload it again please? That would be cool.
That could be the reason maybe!
And yes I made sure to buy from Crucial, I've heard OWC and Crucial are the best and since I'm in Europe I had free shipping from Crucial (plus it was a bit cheaper).
Exactly I have 4 x 8 GB.
Strangely enough, I still can't see it and when I right-click it and try to open it in a new tab, it tells me:
An general error occurred while processing your request.
Anyway, I'm still wondering about my RAM, if something wrong with it or not. Perhaps I damaged it while I was trying to get it in, remember I first had it the wrong way round. This is all very very strange tbh.
Edit: Um, shouldn't it be "A general error", without the N? Even more strange now haha. Or is that because it's "An error"? Ok nevermind...
Are you sure you put it in the wrong way round to start with. There's a notch in one edge of the board to help avoid that .
You could drop down to 16gb to see if that helps resolve the problems, maybe testing the modules in separate pairs to try to eliminate any duff ones.
I see you got them from Crucial - did you note what make they are?
When saying notch, do you mean that little kind of "slot" at the top of them, like in the picture I posted in my first post?
Because what I did basically was to take out the RAM that was already in there, and I put it on the table exactly as it came out – to know in what way to put the new RAM in.
So I tried that and forced a bit, but it didn't work. I took it out and compared it the the MAC RAM. I noticed the notch you were talking about was on the downside, so I put it inside the other way. Basically I just looked on which side the writings were, and not on which side the notch was. Only later I noticed the notch.
The 'notch' is a gap in the metallic edge. The shorter metallic section is on the right as you push the RAM in with the Mac face down. I've got a late 2009 27" and it's clearly shown on page 40 of the Everything Mac booklet that came with the computer.
It can take some shoving to get it to seat properly.
Yeah that's what I thought the notch is. See, the problem is that I first inserted them with the notch on the wrong side. I didn't pay attention to the notch, I only paid attention on which side the writings were. So I forced it and the little metal or whatever, that should get into the notch, probably damaged the metallic edge where there is no nodge. I think I damaged it
Made some pics, they're below!
However I just took the RAM out, placed it differently (in different slots I mean), everything worked fine, Mac started normally, no bleep or whatsoever.
I opened iPhoto to get those pics I made of the RAM, iPhoto is super fast and loads very quickly. Before that it usually wasn't the case, it always needed ages to load.
But since 2 of them are maybe "damaged", maybe I only have 16 GB right now. Even if my Mac says 32 everywhere.
What do you think?
Ok I went there and yeah it says 32 GB total, right now not even 28 are free, 1 and a half are reserved, 2 are active (not sure why, I only use Mail, Safari and Activity Monitor right now...) and 500 MB are inactive. A total of 4 GB that are used.
What's that mean? Is something wrong with it do you believe? It seems to use a lot of RAM for nothing. 4 GB, that's what I had before.
Sounds normal to me. I've got 12gb of RAM and have Mail, Chrome & Skype running, and this is my usage:
Maybe just use the Mac and see if it runs as you would hope. It's only going to access the 32gb of RAM when it needs to - perhaps when processing large video files whilst doing lots of other things as well.
Keep Activity Monitor open and launch numerous applications and just watch to see if you start to max out the RAM. If you see RAM usage anything in the 24-30+gb that should show it's all being utilised and so long as nothing goes pop I think you're OK.