1 2 Previous Next 18 Replies Latest reply: Dec 7, 2012 11:33 AM by BDAqua
missinglina Level 1 Level 1 (0 points)

Hi All. Does anyone have user jon gallet's PDF that he put out in this archived discussion a long time ago: https://discussions.apple.com/thread/1102201?threadID=1102201&tstart=0

 

It's his instructions for installing the fanmate 2 on the emac. Just feel like tinkering with it and find it intriguing.

 

Just thought I'd ask.

 

Thanks.

  • 1. Re: Emac Fan Project
    BDAqua Level 10 Level 10 (116,465 points)

    Hi, only thing I could think of after 100 different ways of searching, was to ask Roam who was in on that post & a member here & n my site, to see if he might have it.

  • 2. Re: Emac Fan Project
    roam Level 6 Level 6 (13,545 points)

    Hi Missinglina, Hi BD,

     

    I'm not sure jon gallet ever got around to publishing his adventure with the eMac fan. I've looked but I don't have it. Most of the working information came from a french site/blog macbidouille who modified an eMac.

     

    Using a Zalman Fanmate controller, apparently still available from this site,

    Zalman Fanmate 2

     

    and then its wires needed adapting to the eMac circuit which is where macbidouille comes in.

    In this link, which translates the French to English, he details how he adapted it to the eMac.

    Making a silent eMac by macbidouille

     

    He even provides sound recordings of the quieter fan before and after.

    The only thing that has changed is the Zalman fanmate 2 is a bit different and so the modification instructions may need to be adapted.

     

    On the fan itself, I think Apple over engineered it to in line with making the eMac the robust machine it is, and doing this made it noisier than it needed to be. It certainly has room to run a little slower and still keep things cool.

  • 3. Re: Emac Fan Project
    BDAqua Level 10 Level 10 (116,465 points)

    Thanks roam!

  • 4. Re: Emac Fan Project
    Pistooli Level 1 Level 1 (25 points)

    I have done this mod myself and tried to document it as much as possible...

     

    http://forums.macrumors.com/showthread.php?t=1330492

     

    The only trouble was indeed to found out the wiring.

     

    Hope it helps!

  • 5. Re: Emac Fan Project
    roam Level 6 Level 6 (13,545 points)

    Thanks Pistooli for the updated information on wiring the fanmate2. I have made a document of your page and the other macrumours page for reference.

  • 6. Re: Emac Fan Project
    Pistooli Level 1 Level 1 (25 points)

    Cheers

  • 7. Re: Emac Fan Project
    missinglina Level 1 Level 1 (0 points)

    Thanks Pistooli.  I finally will get time to crack open the emac this weekend finally. I will definitely look at your post.  Found the fan at Fry's - the last one they had in stock. 

     

    Is there a setting on the dial that I can just leave it at knowing it will be fast enough?  I was hoping to be able to leave the controller inside the case and out of view but this might not be doable without first closing it all back up and turning it on?  I suppose I can runt it from out the back as tidily as possible.

     

    Also when you say "soldering" I'm hoping you are referring to the wire splicing that you did?

  • 8. Re: Emac Fan Project
    Pistooli Level 1 Level 1 (25 points)

    yes, correct, wire splicing...

     

    as for the fan speed settings, I have no idea. I just used a speed, when the fan is barely audible. I personally left the controller piece outside, applying a long enough wire.

     

    Good luck!

  • 9. Re: Emac Fan Project
    missinglina Level 1 Level 1 (0 points)

    Wow I just saw you are in Budapest.  Greetings to all from USA. 

    Ok well.... after hours spent putting in the hard drive, dvd burner, and the fan switch, and putting it all back together -- the eMac won't turn on!  It makes a click and the screen makes a sound like it receives current but nothing else.  No chime, no fans, no monitor output.

     

    I might have killed it!  But I was very careful with it so I am hoping that I can bring it back.

     

    I also changed the PRAM battery and at first I was hoping it was only a matter of pressing the PMU button but no luck.  Maybe I need to press it for longer?  I pressed it for a full second then opened it again and tried it for about 2 seconds but same result.

     

    I also un-installed the fan switch and connected the fan normally, but same results.

     

    Pretty bummed but hopefully if I take out the motherboard again and re-seat it? 

  • 10. Re: Emac Fan Project
    Pistooli Level 1 Level 1 (25 points)

    If you have followed the wiring, then not problems could occur from that side. I remember having the same shock also, but was able to start it after all. Do not remember anymore if I did anything special, though, to revive it.

  • 11. Re: Emac Fan Project
    roam Level 6 Level 6 (13,545 points)

    the eMac won't turn on!  It makes a click and the screen makes a sound like it receives current but nothing else.

    This has been known to occur before, though exactly why is unclear. My theory is that the circuit to connect the on button to the power supply, requires bridging a low voltage circuit to a high voltage one, which would likely involve a capacitor with a stored voltage to connect the circuit.

    By disconnecting the circuit, the capacitor voltage is disappated, and because if its age may not be as responsive when being recharged.

    The solution can often be to leave the eMac plugged into the mains power, switched on at the wall and allow the trickle charge of electricity to fill that capacitor. You might have to leave it for several hours or even overnight before you will get it to boot.     

  • 12. Re: Emac Fan Project
    missinglina Level 1 Level 1 (0 points)

    Thanks very much guys. I appreciate your input in my efforts to make useful what society says is obsolete!    Guess what?  The eMac is back!  10.5 is beautiful so far.  (10.6 was perfection, but of course, intel only).   I have Lion on my Macbook and the emac is making me miss the "classic OS X"!  Will post an update soon - have some questions. 

  • 13. Re: Emac Fan Project
    missinglina Level 1 Level 1 (0 points)

    roam I was hoping that something like that might be taking place but it turned out to be something else I believe.

     

    I took out the logic board again and re-seated it.  I think what may have happened is the blind mate port (if that's the name) was not completely connected because the power cable for the HD might have been improperly routed.  The down converter has a notch that appears to be designed for those cables to pass through and they were not so maybe the wires were creating a gap even though it all appeared to be snapped in correctly. 

     

    So now it boots and it recognizes the new 300GB drive and the super drive.  I installed OS X 10.5 on it and it is running it beautifully so far (not that I've gotten to do much except some basic user account creations and configurations).

     

    The Zalman switch is in place.  However, it does not seem to affect the speed at all.  I take it there should be a clear correspondence b/w the dial and the sound/speed of the fan but there appears to be no change.  I wonder what I did wrong.  I did the splicing asyour picture indicated and wish I had taken a picture for you to check. I will need to do that at some point. 

     

    The name of the product is this:  Zalman Fan Mate 2.  The sticker from Fry's is covering up all the specifications on the package and can't be removed cleanly.  The UPC is 823884100013

     

    What I thought I was supposed to do to it is this:

     

    Cut the cable  of the Zalman product and then splice the female side to what was the male side, and the male side to what female side.  When I did that, my colors matched your colors exactly on the splicing.  Then I did shave one of connectors to make it fit into the emac's female connector I believe, and the other connector, I just broke off the tab at the top and that made it insertable on the emac's connector.  I secured that connection with tape as well to  keep it from slipping.

  • 14. Re: Emac Fan Project
    missinglina Level 1 Level 1 (0 points)

    Just an update on my fan project.  I think I know why it "didn't work".  I believe I have a bad controller.  When I pushed down on the button as I turned it once, I heard a definite correspondence to the speed and noise of the fan.  I have since also managed to raise it back up, and hopefully all the way back down again because it's quieter again.  If I simply turn the dial, no change, although it's possible that the change does eventually kick in but I'm not able to detect it.  Even if I press down and turn, for the most part I get no response.  It's ony occassionaly that I seem to get lucky.  I went back to Fry's but they are completely out of the controller so I'll wait for them to stock some more, hopefully within a couple of weeks.  There were willing to let me return mine w/o the cables. 

     

    I am pretty sure that I can get it back down to the lower setting if I haven't done so yet since raising it, and then I'll leave it alone.  If I never replace the contoller, the "hack" would still have worked, as long as the emac doesn't overheat.

     

    A couple of questions:

    1. Do you guys know if raising it to the maximum speed makes the fan spin beyond it's default or does it simply set it to blow at its factory default?
    2. Do you know if the emac varies the speed of the fan based on temp. sensors or does it come only with one speed? 
    3. When you turn your dial on your controller, does the fan immediately respond to the dial, or or is there a cycle that regulates when it checks for changes in voltage (or is it amps)?

     

    Thank you very much for your help.  Couldn't have done it w/o your assistance.

     

    I'm tickled at how well the emac is running 10.5. Because it's sort of "off the grid" in terms of upates to most programs, it has a feel of a device.  You turn it on and you know what it can do.  Period!

1 2 Previous Next