1 2 Previous Next 20 Replies Latest reply: May 22, 2014 6:46 PM by kibulfoij
Ben suarez Level 1 Level 1 (0 points)

My wife did a software update and them it asked for a restart, she click restart but the computer got stuck in apple logo and spinning wheel. Won't go past that now. Just keeps spinning! Help for I know not what to do!!!! Please any idea?


iMac, Mac OS X (10.7.5), It's a mid 2010 imac
  • 1. Re: iMac is stuck on apple logo and spinning wheel
    Kappy Level 10 Level 10 (226,685 points)

    Reinstalling Lion/Mountain Lion Without Erasing the Drive

     

    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.

     

    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.

     

    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.

     

    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • 2. Re: iMac is stuck on apple logo and spinning wheel
    Ben suarez Level 1 Level 1 (0 points)

    I click on the hard drive and the s.m.a.r.t status said verified. So I did what you said to do next, click on the Mac OS X from the left but it doesn't allow me to verify disk or repair disk. I see it there but doesn't allow me to click it. It's faded out I hope u understand me. Is there another step? Did I miss one?

  • 3. Re: iMac is stuck on apple logo and spinning wheel
    rkaufmann87 Level 8 Level 8 (42,145 points)

    You can only Repair Disk by booting from the Recovery Partition. How you boot to the Recover Partition is easy. When you hear the startup tone hold down the Option Key and choose it. Then open Disk Utility and run the functions. If your HD gets errors after 2-3 passes it needs the HD replaced immediately.

  • 4. Re: iMac is stuck on apple logo and spinning wheel
    Kappy Level 10 Level 10 (226,685 points)

    Are you booted into the Recovery HD per my instructions? Did you select your OS X volume?

     

    As seen here:

     

    Screen Shot 2012-11-19 at 6.40.03 PM.png

     

    In the example above you are selecting the volume below the main drive entry. Your volume may be named "Macintosh HD."

  • 5. Re: iMac is stuck on apple logo and spinning wheel
    Ben suarez Level 1 Level 1 (0 points)

    Ok that's what I was doing wrong. I did that and when I clicked repair disk I got on the window: invalid note structure; the volume Macintosh hd could not be verified completely. ; Error: disk utility can't repair disk....disk, and restore your backed-up files;.... All in red.  Then a pop up window that says: "disk utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed up files." Please help...

  • 6. Re: iMac is stuck on apple logo and spinning wheel
    rkaufmann87 Level 8 Level 8 (42,145 points)

    Your HD has failed, you need to have it replaced immediately. If you have been backing up this will be a minor inconvenience however if you haven't you are about to learn why backup is critical. If your machine is covered by AppleCare then simply call AppleCare adn they will walk you through what needs to be done.

  • 7. Re: iMac is stuck on apple logo and spinning wheel
    Ben suarez Level 1 Level 1 (0 points)

    Why does the computer tell me the hard drive can be saved. Makes it seem like I need it to format it then reinstall lion...??? Why the hard drive says verified like saying its ok. But the Macintosh hd below the hard drive is what telling me this that I need to format it....???

  • 8. Re: iMac is stuck on apple logo and spinning wheel
    rkaufmann87 Level 8 Level 8 (42,145 points)

    Just because it says it's verified that doesn't mean it's healthy. It probably is not.

  • 9. Re: iMac is stuck on apple logo and spinning wheel
    Kappy Level 10 Level 10 (226,685 points)

    An invalid node is an error DU cannot repair. If you don't mind spending $100 for Disk Warrior, then I suggest you buy it because it can fix the error. Otherwise, do as the warning says. Backup your files. You will then have to erase the drive and reinstall. The procedure is:

     

    Install or Reinstall Lion/Mountain Lion from Scratch

     

    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.

     

    Boot to the Recovery HD:

     

    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Erase the hard drive:

     

      1. Select Disk Utility from the main menu and click on the Continue button.

     

      2. After DU loads select your startup volume (usually Macintosh HD) from the

          left side list. Click on the Erase tab in the DU main window.

     

      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on

            the Security button and set the Zero Data option to one-pass. Click on

          the Erase button and wait until the process has completed.

     

      4. Quit DU and return to the main menu.

     

    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.

     

    Note: You will need an active Internet connection. I suggest using Ethernet if possible

                because it is three times faster than wireless.

  • 10. Re: iMac is stuck on apple logo and spinning wheel
    Ben suarez Level 1 Level 1 (0 points)

    Ok kappy. If you can help me How do I back-up my files to an external drive? And the hard drive is good still then right? Just have to erase it and reinstall lion following your steps? And why did this happened in the first place? I just tried to do a software update and this happened. The computer was running flawless before this.

  • 11. Re: iMac is stuck on apple logo and spinning wheel
    Kappy Level 10 Level 10 (226,685 points)

    If you have been backing up regularly then you can just restore from that backup. If you have no backup then you would need to try connecting to another Mac providing both the computers have a FireWire port. You would then connect the two by FireWire cable and use Target Disk Mode in order to access your computer's HDD. You might then be able to copy your files from the drive provided they are accessible from the other computer.

     

    Unfortunately, there really is no way to know "why" it happened. There are many possible reasons. It's pretty much guess work without the proper testing equipment.

     

    If the drive is restorable it may be worth the $100 to purchase Disk Warrior and then see if it can restore the drive's directory to normal.

  • 12. Re: iMac is stuck on apple logo and spinning wheel
    Suzanne191 Level 1 Level 1 (0 points)

    I have just tried to instal the Samsung software for my new phone and the same thing happened, grey screen with the apple logo.  I backed up all of my contacts on my iTunes prior to the installation. Would I be able to do the transfer from my iPhone4 to my galaxy s3 on another computer with the software?

  • 13. Re: iMac is stuck on apple logo and spinning wheel
    rkaufmann87 Level 8 Level 8 (42,145 points)

    Suzanne191,

     

    Please create your own thread, what you are doing is very impolite which I am sure is not your intent. On the Internet this is called Thread Jacking. The reason it's impolite is while you may similar symptoms the cause is probably completely different. This makes the thread confusing and can take it off it's original focus. Please take a couple of moments, create your own thread and I am sure someone will be willing to help you out.

     

    Thanks,

  • 14. Re: iMac is stuck on apple logo and spinning wheel
    Suzanne191 Level 1 Level 1 (0 points)

    Wow thanks for your very RUDE response. Seeing as though on every other forum I have been in its considered impolite to start a new thread with the same topic I though it sensible to ask the kind people who answered Ben Suarez with his issue. Don't worry, seeing as none of the suggestions worked for him, I will be taking my machine to the closest apple store where I'm sure that someone will be able to assist.

1 2 Previous Next