Skip navigation

trouble configuring airport after move

104 Views 1 Reply Latest reply: Nov 21, 2012 2:38 PM by Kappy RSS
dtk2i Calculating status...
Currently Being Moderated
Nov 21, 2012 2:30 PM

I just moved homes and trying to configure my airport extreme but it will not connect to the internet... i can plug in straight from the modem but when i go from modem to airport it doesn't work and flashes amber.

  • Kappy Level 10 Level 10 (221,080 points)
    Currently Being Moderated
    Nov 21, 2012 2:38 PM (in response to dtk2i)

    Start by resetting the AEBS. The reset button is on the back.

     

    Resetting an AirPort Base Station or Time Capsule FAQ

     

    Then see if you can't start over. After you reset it disconnect the power from the AEBS, modem, and computer. Wait at least one minute. Turn on the modem and wait for the status lights to show communication with your ISP. Then turn on the AEBS and wait until the status light turns green (or solid orange after blinking orange.) Then turn on the computer. Open Airport Utility to check that you are now connected and to determine what additional configuration you need to do such as setting up your WPA2 security passwword.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.