Currently Being ModeratedNov 26, 2012 9:25 AM (in response to rmh1949)
Thanks Kappy, unfortunately I have version 6.1 of the AP utility. I tried to install the older version, 5.6 but couldnt. I am using ML 10.8.2
Currently Being ModeratedNov 26, 2012 9:32 AM (in response to rmh1949)
There's a version of these instructions for AirPort Utility v6.x here.
Currently Being ModeratedNov 26, 2012 9:45 AM (in response to rmh1949)
I am a novice and dont understan this part:
MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
Where do i get the hardware address?
Currently Being ModeratedNov 26, 2012 9:56 AM (in response to rmh1949)
The MAC address may be printed on your IP camera or can be found when you access the camera through the web-based administrator interface. It will look something like: NN:NN:NN:NN:NN:NN
Currently Being ModeratedFeb 25, 2013 7:47 PM (in response to rmh1949)
There is a free utility called IP Scanner. http://10base-t.com
Currently Being ModeratedMay 9, 2013 10:08 PM (in response to rmh1949)
Note that you CANNOT currently port forward to a statically assigned IP. This is a bug in apples router as far as I am concerned, but the directions do get you what you need.
Currently Being ModeratedFeb 21, 2014 4:16 PM (in response to rmh1949)
Im trying to monitor an ip camera at a separate location from the recording software on my home computer. Both computers are iMacs, camera computer has airport wireless router and recording computer has linksys router. is single port forwarding the way to get from remote computer to recording computer and if so how would I allow access to recording computer or would the recording software do that over the internet for me? I am really at a loss right now on how to set this up. any help would be GREATLY appreciated.