HT204617: Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
Learn about Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
-
All replies
-
Helpful answers
-
Oct 22, 2012 6:24 AM in response to rcianciaby Bob Timmons,You can certainly connect the two Time Capsules using Ethernet...and....it will provide much better wireless perfomance than using a wireless only connection between the two Time Capsules.
-
Nov 26, 2012 1:06 PM in response to Bob Timmonsby mrarlen,I'm looking for the exact settings. I'm getting a Double NAT error.
-
Nov 26, 2012 1:12 PM in response to mrarlenby LaPastenague,If your setting are the same as the OP you need to bridge the second TC.
That is router bridge not wireless bridge.. it is option under network or under internet depending on the version airport utility you use.. choose bridge and all will be well..
-
Jan 4, 2013 9:08 AM in response to rcianciaby madownage,Hello!
I have the same problem, i am trying to do this
Timecapsule nr 1, ISP uplink to WAN.
from this one i have LAN to the other timecapsule to WAN.
On the first timecapsule i have DHCP/NAT enable.
On the second i have, Bridge mode.
But when i am connected with eth to the second one i wont recive dhcp addresses or anything... like it wont passtrough.
Any ideas?
-
Jan 4, 2013 11:27 AM in response to madownageby madownage,i used the guide after a hard reset and now its working fine.
From timecapsule 1 to 2 is LAN-WAN.